Control point that occur for each transfer journal

Similar Questions

• I have a lot of old software CS (from the closure of the design company). In order to sell and transfer licenses, what I have to go through the license for each transfer and open a file number for each, how complete it when I sold? Or y at - it an easier

  License transfer - several pieces of software

  Jane,

  Adobe licenses should be transferred when changing users. Transfer the license allows the owner to register the software to their name again. Both the author of the transfer of the license and the recipient must complete a transfer of license form. The serial number of the product must be registered in the Adobe profile of the transferor to transfer the license. You must qualify under license transfer policy.

  Please visit these links for more details:

  Transfer an Adobe product license

  Adobe license transfer form

  Kind regards

  Guinot

• A DB OEM controls for each DB on the same server?

  Hello

  My client doesn't have a license for the OEM Grid Control. But I would like to configure OEM DB control such that I can access each DB on the server (even) [instance of a control of DB OEM for each DB]. Is this possible? Please let me know the procedure if this is feasible.

  Best regards

  user130038 wrote:

  Hello

  My client doesn't have a license for the OEM Grid Control. But I would like to configure OEM DB control such that I can access each DB on the server (even) [instance of a control of DB OEM for each DB]. Is this possible? Please let me know the procedure if this is feasible.

  Best regards

  ============================================================================

  On several dbcontrol

  Of the Installation Guide for Oracle 11.2:

  [quote]

  -Deploy Oracle Enterprise Manager Database Control locally on the system database

  Oracle Enterprise Manager Database Control software is installed by default with

  each installation of the Oracle database. This local installation provides a Web-based

  interface called Oracle Enterprise Manager Database Control. The database

  Control is similar in function to the grid control, but it can manage a single

  database. If you want to administer several databases on this system, then

  you must configure a separate for each database database control*, or install

  Oracle Enterprise Manager Grid Control.

  [excerpt]

  underlining.

  In addition, each dbcontrol on a given server instance runs with its own port, which is part of the url to access the management page.

  ============================================================================

  Note that the above is not a separate software installation, but a separate configuration.

• Ground control point and of the CNS by using process DBWr and LOGWr?

  What control point has to do with the log writer process I don't get exactly?...
  
  As I fire 1 query updated and apparently it will generate some redo blocks which in turn will come to my redo log files now in this cycle where the control point will occur and why?
  
  (1) my update query
  (2) lock
  (3) generate redo
  (4) generate cancel
  5 blocks) are changed, but they are still in the redo log buffer...
  
  Now this block finally comes to redo logs in all this way to check off pointing place and why?
  
  control point takes place also however is flushed to the data files the same reason why?
  
  Same manner around the same question the checkpointing should do with the DBWr process as I'm unclear...
  
  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Apart from this overview of the SNA is generated when the user launches period... and we can say YVERT can be used to identify whether or not the transaction is validated. ?
  So what is the reason for the SNA update in the control file... Can b to get the last transaction committed... ??
  
  Sorry a thread with questions so much... but this all things create a blurry image, I want to clearly say thnx for your help in advance...
  I've read the documentation, but they did not mention deep for recovery... ??
  
  
  
  Thank you
  Philippe
  
  Published by: 851733 on April 12, 2011 07:57

  And you the chance to read the guide to the Concepts and the book, Expert, alone that I proposed to read? I guess no, no? You mean, you have to read two books for sure because it would take a lot of time before you would get things correctly.

  YVERT is a like a timestamp which oracle maintain separate trasactions of time?

  Evil. CPN is with each operation, whether a DML, select, DDL, whatever it is. It's time, that's all. Validation of a transaction would be just another event that will be mapped to the SCN generated right here.

  Checkpoint is a SNA during which we emptied all Sales buffers to disk?

  Have you read in my last response I mentioned CPN is to read-consitancy and checkpoint is for the recvoery? So, how you said that this point of control is nothing other than RCS? See the definition of the Concepts guide,

  A data structure that marks the position of the control point, which is the RCS in the thread again where instance recovery should begin. Control points are recorded in the control file and each file header data and are a crucial part of the recovery.

  So assuming that the roll forward flow is as below,

  Begin - Checkpoint - end

  The point where the word Checkpoint is mentioned, is the place where begins the recovery.

  Control files and headers of the data files are updated with the last control point (now this checkpoint is the last SNA by what buffer cache is empty so that we can know up to what our data files are updated).

  Read the above, given the definition of the control point.

  Buffers are marked with YVERT?

  Don't know what you mean by this statement?

  Tell you what, read the guide concepts and Experts, by Tom Kyte to understand these things in a way much better. Besides, if you can organize, attend the session for workshop-1 or 2 modules of Oracle University, where the instructor would release these questions into a long discussion, very strongly suggested that with the above mentioned books.

  Aman...

• Type a table defined clusters to hold configuration data - definition of default values for each element of the array

  Hello

  I was wondering if I could get some information and opinions on the use of an array of type defined clusters to store configuration data.  I am creating a program to test several EHR and wanted to have a control of type defined for each HAD with the information needed to create the DAQmx tasks for all signals for it must HAVE.  I am eager to do so that the data are encoded in hard and not in a file that the user might spoil.

  Controls of type def are then put into a Subvi who chooses as appropriate, one based on the enumeration of Type DUT connected to a case structure.

  I have problems with the control of the defined type.  I see issues when you try to save a configuration unique to each element of the array in the array of clusters.  Somehow, it worked at first, but now by clicking on "Operations on the data--> default font of the current value ' on individual elements of the cluster or the entire cluster (array element) does not save data when I re - open the command def.  What I am doing wrong?  I'm trying to do something with the berries of the clusters that I shouldn't do?

  I enclose one of the defined reference type controls.  I tried to change it bare to see if that helped, but no luck.

  To reproduce, change the resource string for the element 0 of the array and do the new value by default.  Then close the def of type, and then reopen it.  The old value is always present in this element.  The VI is saved in LabVIEW 2012.

  The values of a typedef are not proprigated to the instances of the control. They get if created WHEN data values have changed. They will be not updated with the changes to come. You must create a VI specifically to hardcode your values or to implement a file based initialization. The base file would be much better and more flexible. If you don't want users to change the data simply encryption. There is a wedding blowfish library that you can download.

• How to map the entered value of attribute column to another attribute in the table for each row.

  Hi Experts ADF,

  JDev 12 c.

  I create a button and a table below. If the user clicks on the button create, I invoke CreateInsert. The new line now appears as an editable fields.

  So I suppose I have a column that is displayed in editable mode. If the user enters values in that. Has another column B whose value is not displayed in the UI must have the same value as the column.

  This occurs for each row added. During the click on save if user entered 2 in column A, then the value in column B must be same 2.

  Thank you

  Roy

  There is more than one way, for example:

  Generate ViewRowImpl Java class (with generate audited accessors) you will get for an attribute setter.

  Change the Set accessor to set the attribute B (IE, calling setAttribute ("B", value)) after setting a value

  OR, write valueChangeListener for inputText representative and set the B attribute to the same value

• Confused about "additional control Points.

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn written stamps Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  efa78257-b5f4-4db1-8222-007be18d15aa wrote:

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn writes buffers of Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  There are many types of control points. One that will be updated on the headers of data files would be a complete control and would be applicable to the entire base. The additional control point is induced to keep on enhanching a counter that would ensure that only certain limited stamp Sales would be recovering. That's why a moment of the additional control point, data file headers are not being updated. Control file is probably updated with a "pointer to disk" which mentions the point up to which the dirty buffers are written in files (from the buffer cache) data and where to start the recovery, if necessary. Log file switch will cause a thread control point which, for one instance, would be considered a Global checkpoint only. The additional control point would be for various other reasons such as setting a value for the parameter Fast_Start_Mttr_Target etc.

  HTH

  Aman...

• Source control of database - separate files for each object...

  I have always used a tool that has a repostory as Designer, Erwin and now ERStudio to keep and maintain my database and the objects together in one place. Now, you asked us to make a file for each package, proc, func, trigger, table, view, sequence and others and store these files in a CVS tool. I basically keep Oracle Forms applications and have a lot of things. I'm not working on a JAVA application where I could get one or two procs PLSQL for archive - as appropriate. Seems a lot of work for me when I can click a few buttons and save my entire schema in the repository or export a single big SQL file and check in CVS for each version. Whence this control a separate file in the CVS idea ever come and how is this better than using a repository tool or a single big SQL file for each version?
  
  Then, links or comments that describe the best way to CVS a database from the point of view of Oracle schema?
  
  Published by: Mark Reichman on January 27, 2010 14:02

  Oracle often emphasizes their own products for tasks:

  Fix Oracle Change Management:
  http://www.Oracle.com/technology/products/manageability/database/PDF/DS/change-management-pack-11gr2-datasheet.PDF
  Old page
  http://www.Oracle.com/technology/products/OEM/htdocs/CMDEV_WP_9i.html
  Presentation of 2007 World open
  http://www.Oracle.com/technology/products/manageability/database/PDF/ow07/change_management_presentation_ow07.PDF
  Of course you have outside products such as
  http://www.dbmaestro.com/dbmaestro/448.aspx

  However, how can do you it with the tool that is using your business...
  You can check if the tool that you use to design has some kind of ability to connect to the CVS tool. I know that JDeveloper.

  I would say that the benefits of multiple files in a single file is just the ability to better track what changes affect what parts of the application. This is important for testers be able to focus and easier to track problems.

  The people who are pushing for motivated individual files documented why they think it's a better way to keep the changes?

  Concerning
  Tim Boles

• Windows Contacts now display an Adobe icon for each of them and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.

  For some reason any, that my Windows Contacts show now an icon of Adobe for each of them, and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.  I tried right-clicking and using "open with...". "to set a default value, but no other programs are listed as possibilities.  By clicking on 'Browse' of course gives me a window of the Explorer, but I have no idea what program select open Windows Contacts with.

  Contacts Windows used to work perfectly, and I have no idea if this problem started, or why.

  Can someone tell me how to open them properly, with the Windows Contacts program?  Thank you!

  original title: my Windows Contacts have Adobe icons and does not (Hijacked by Adobe Reader 9.0?)

  Go to: Control Panel, programs by default, associate a type of file or Protocol with a program.

  Scroll down to:...

  .contact... Click here to highlight, click on change program, click Windows Contacts.

  Make sure that there is the box... Always use the selected program to open this type of file.

  Repeat the process for:...

  . Group

  . P7C

  .vcf

  (Protocols)

  LDAP

• Control point for endpoint connect is compatible with Windows 8.1?

  Original title: CheckPoint endpoint connect

  Hello

  I'll do the upgrade of Windows 8 Pro for Windows Pro 8.1.

  By choosing the upgrade path that allows me to keep all the files, settings and applications, it shows that the only application that I have to uninstall will be Checkpoint Endpoint Connect (which currently runs under Windows 8 Pro).

  At all known installation CheckPoint EndPoint Connect on Windows Pro 8.1 and installed successfully?

  Thanks for the reply.

  I've went ahead with the installation of Windows RTM 8.1 and took the risk that Checkpoint would not be compatible.

  I was able to uninstall Checkpoint, as part of the upgrade of Windows 8.1 window and subsequently install Checkpoint endpoint connect successfully.

  Therefore, I am happy to say that for our Organization and our version of the control point, it is looking like it is fully compatible with Windows 8.1.

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• I want to move a large number of photos but don't want to unique, click each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions?

  I want to spend a lot of photos (they are in order) but and do not want to have to click to move each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions? I know it's apple 101, but I don't remember what order to press the button command, or shift, or other. Thank you

  Select the first file, then hold down the SHIFT key, and then click the last file. Or, select any file in the folder and then press command + A

• LabVIEW allows to read an Excel file to a control and add a checkbox for each line

  As say the topic, I need to use labview to read an excel file and show it in a control, such as mclb; I should add a checkbox for each line then allow me to choose the line I want. What should I do? Thank you very much.

  guiming wrote:

  I can read an Excel file to a spreadsheet, but I have no idea how to do to add a checkbox for each line.

  Sometimes, all you need to do is Google. https://decibel.NI.com/content/docs/doc-25000

  http://www.labviewing.com/check-box-in-multicolumn-ListBox/