Terminal cd command does not properly

Similar Questions

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• UC520 # squeeze flash: command does not exist - need help

  Hi all
  I am having trouble with a UC520. After the update, removal and the phoneloads to the flash Uploader: memory, it is almost full. (But there should be more space available).
  When I use the command display flash: or dir/all/recursive flash: the UC500 told me there are 4.505.600 bytes available (123.678.720 bytes used) my card flash 128 Mr. but when I the sum of simple files file sizes it is only 64.543.836 bytes so it must at least be free 60Mbytes.
  After some research, I think that the problem is that the flash is fragmented or files where not propperly / entirely deleted.
  To resolve this problem Cisco offers the command squeeze . But this command does not exist on the CPU. How to solve this problem, do you have any suggestions?
  -Patrick

  Wow. I have no idea this is.

  I guess you can back them up and get down them. Maybe after some research on orphans' on flash iOS.

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• Scrolling the page does not properly respond to BlackBerry Curve9360

  Hello friend

  I have developed applications for BlackBerry (JqueryMobile, Phonegap) the application works fine in BlackBerry Torch 9800.

  But once I've installed in BlackBerry Curve9360, scrolling of the page does not properly, that I am not able to view the complete list of items and long text.

  Help, please

  I came up with the solution, the problem occurs because BlackBerry Curve 9360 isn't a touchscreen, there fore scroll doesn't work.

  In my applications, I add 2 pages "index.html."

  on the first page, you have to test if the device is not touch and redirect to the second page.

  Do not use the page for "BB Curve" scroll and any other animation like CSS "" - webkit - transform: translate3d "»

  The other js script go without a problem.

  The page "BB Curve" to redesign the html for use with the cursor,
  For example, the menu is smaller, the police is smaller.
  the size of the screen is fixed.
  Dimension height is better indicate a value min eg 300px
  etc...

• Mini Bridge does not properly

  Mini Bridge does not properly; said the bridge should run but the bridge is running and mini Bridge never load

  Hi Margot,.

  Mini Bridge is created on a former technology based on Flash, which is currently not supported for future versions. Mini Bridge support will be removed in the Future of the Bridge and InDesign version.

  Thank you

  Deepak Gupta