Controll and Blakberry Image effect

Similar Questions

• Is it possible to split and merge images effectively?

  Since I was in an Adobe forum, with a lot of graphic designers, I might as well ask this question. ._.

  I am an artist webtoon, and when you create one, the webtoon dimension is as such that it

  1 page = 800 x 1200 100 [DPI]
  1 Webtoon = 800 x 50000 [100 dpi] (all pages are merged).

  I did manually with the rule and the guideline.

  But it becomes tedious and exhausting for me to do that, since I usually have to split/merge: about 60 pages or 180 panels every week.

  Even using the rule and guide, it seems to be like difference of 1 to 5 pixels with each crop.

  When you use the split tool, I can't divide it into the correct size.

  For example, if my document is 800 x 50000, I want it be split into

  800 x 1200 * 41 pages and 800 x 800 * 1 page.

  ^ Is it possible? @.@

  Thanks in advance... D:

  [Note - the reason why I do it is because in a webtoon, 1st = 1st + 2nd panel Panel page and 2nd page Panel = 2nd + 3rd Panel.] As you can see, 2nd Panel is sandwiched between the 1st and 2nd pages, so I have to fix first in large size paper and even a few pixel difference can ruin the image when cropping. ]

  I support the point made by c.pfaffenbichler. It's something script could handle easily.

• Some controls of the Photo effects does not

  I just bought 11 elements for MacOS, and I'm unable to get some of the controls to work in the section Photo effects.  A grand is in the 'Old Fashioned Photo' effect, where I can't 'Adjust the tone' for work.  When I click the button, the cursor runs for a split second, the button is highlighted, then when I move the mouse the button it is unchecked.  No setting command is.  The same thing in 'Levels' button in the effect of the "line of demarcation", no control appears.  By clicking on 'Levels' several times does not change the line resistance, either.

  It supposed to be setting the level controls, and if not, because by clicking on them, doesn't matter, how am I supposed to get the effects?

  MacBook 13-inch, early 2008

  Processor 2.4 GHz Intel Core 2 Duo

  Memory 4 GB 667 MHz DDR2 SDRAM

  Graphics  Intel GMA X 3100 144 MB

  Software  Mac OS X Lion 10.7.5 (11G 63)

  Photoshop Elements 11

  review 20120830.r.32025

  Thank you.

  Hi adiseker,

  In guided Edit, these buttons apply some default effects. For example, the levels button you mentioned above, makes a little darker lines. What you will see will depend on your image. The effect is applied in some quantity by default, but can be which is not differentiable on the image that you use. It is the same with setting the tone button.

  In order to change the levels of the image, you can explicitly guided change in editing levels.

  Hope that helps.

  Thank you.

• A way to group controls and indicators on the Front Panel and that they can be made Visible or not as a group?

  I would like to combine several orders and LEDs on the front panel in a group in a way that allows me to do the whole group Visible or not.

  I tried to use a Cluster, but it has a side effect that all elements must be inside the controls or indicators, but not mixed.

  Is there any graphic element, like a panel that can contain other controls and indicators on the inside and make them Visible or not as a group regardless of whether they are commands or the LEDs?

  Good suggestions on how to do this?

  Thank you.

  The tab control is still not my favorite, appearance but it's a way fast and effective to show and hide groups of controls and indicators.

• problem with tab structure control and event

  Hello

  My program has a tab control. In each tab, I have an event structure to control some events.

  I encountered some problems. These are:

  1. in each tab, I set tab as an event control, to altogether from the structure of the event as tab change (for example, the image below). My first problem is that when I change the tabs, in the arch depending on whether my program is entered in the next tab environment, happening at the event: change value to main tab! And gives bad result.

  

  

  2 - I've scheduled two final tabs as below in the image. I had no routine in these two tabs. Simply, I want when I change the tab, it goes to the next case of the tab control. But when I run the program, it goes to something as busy after one or two changes tab and did not work properly.

  

  Could someone help me please?

  Thanks in advance

  Baran

  Rebecca wrote:

  I want to have 4 tabs, each tab having 3 Boolean control.

  If in each tab all Boolean control wins 1, a Subvi should be run.

  I wrote this code with some time within each tab loop this case hase 3 for each Boolean control. The result is true.

  But I think that if I write it with a structure of the event within each tab instead of 3 cases, the cpu load will be lower.

  Is it not true?

  Make a unique Structure of the event.

  Add events for all controls (buttons, Boolean)

  When the event is triggeredcheck for active tab control and decide what void / vi to run

  It will work fine you

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• How findout/control rate of image capture?

  Hello

  I built a vi (adapted from "sequence and save in AVI.vi") to capture images and save them. I can specify the number of images that I am capture, but I can't specify the speed at which images are being captured, since there is no option in «IMAQ Sequence.vi»

  (1) how to find the speed at which my program captures images?

  (2) how can I control the capture rate without having to use writeto AVI function (vi)?

  The reason I can not use the ' sequence and save in AVI.vi "is that it is compatible only with the 8-bit and RGB images, while the device I use produces an image I16. And I can't convert it into 8-bit image, because I can't find the "IMAQ Cast Image.vi" function even after installation of 8,6 VDM (my version of labview 8.6 and IMAQ is 4.0). Vision.txt contains a list of programs OR installed on my machine.

  I use a PCI 1426 framegrabber and Imperix "X2M30HL" camera (specs say that its rate is 33) and I'm running on Windows XP.

  Y at - it an option for me to capture images to rate high (close to offered by the camera) other than its use "IMAQ Sequence.vi.

  Thank you

  Sandeep

  Hi Sandeep,

  I would like to repair or reinstall VDM at this stage.  It is probably a problem with the installation, especially if you have LabVIEW recently upgraded.  Please let me know if this does not resolve the issue.

• With the help of control and simulation module; e to get the time the MISO model Manager

  Hello

  Please can someone show me how to find the response time of the system below using the module control and simulation?

  (y (k) - 1,7407 y (k-1) + 0.6236y (k-2) + 0.1782y (k-3)) =-0.0932 u(k-1) + e (k)

  where there is out, u came and e is a white noise.

  I tried to enter the CD construct MIMO model, then connect it to CD response time. * s vi.

  But what I really need to enter the model coeffs every time? and I still don't see the answer!

  Help, please...

  Kind regards

  ruser

  Hello

  you have the correct image... I used the Toolbox ID sys (Assistant)... to estimate the system model...

  and I tried all week last get the model of my system in labview for use the control on this module.

  Alhamdulillah...

  I ended up doing... I saved the template to a file from the Toolbox id sys... (my model is in discrete form) then I loaded it in labview using load file pattern...

  so now I in labview...

  now for control parts... ..

  Thank you again...

  ruser.

• Create a DVD combining Jpeg photos and moving images MP4

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  ==========================================

  You can do the Panning... with Photo Story 3.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works on XP, Vista and?) Win7?)

  This is not a full tutorial, but should be enough to help you started...

  First be sure that the photo is less than 7200 x 7200 pixels pixels.

  Import a panoramic photo in Photo Story 3 and move on
  the screen "tell your photos and customize the animation."
  (do not remove the black borders)

  On the left, click Custom animation...

  Check the box on the screen to customize the animation...... "specify
  Start and end Position of the movement "." Resize and reposition the
  Start management Position and final Position you prefer and
  on the left, click the Preview button to see the result.

  Also you can import multiple instances of a photo and
  Pan from point A to point B in the first instance,... then point B
  point c on the second instance and so on.

  When the effects of movement are completed you can add music if
  you want and go to the screen "Save Your Story."

  You can left click on the 'Settings' button for several choices of
  resolution... the profile of 1024 x 768 is perhaps a good choice.

  Also... Choose a backup location and a name for your video.

  To save the project as a. WMV video file... click Next
  last time.

  Then you can import that video as well as other photos and
  video clips in DVD Maker to create your DVD. If you have
  problems with the video clips you may need to convert to MP4
  paste them into WMV format before importing in creation of DVD.

• Information on the performance and tools: Visual effects adjust - adjust for a performance/appearance: influence on the photos and video?

  When I enter: Information on the performance and tools: Visual effects adjust - adjust for a performance/appearance, it affects pictures and video? What is the display of the video?

  I really like what I see with better appearance. But my laptop is slow a little, and I get this Green spinning circle and programs not opening.

  But since I intend to make some photos and video editing in the computer and watch a few videos, I wondered if the work will be compromised.

  I have a few tutorials to speed up my laptop, but can someone also suggest to speed up my laptop here? I'm always willing to learn some things.

  Hello

  You can optimize the performance of different options in the information on the performance and the tool window. This will not affect the performance of the images and videos. Adjust for best appearance to set the computer to enhance the appearance, it allows many features aero that improves the display quality of the computer.

  To optimize the performance of the computer follow the steps provided in the link below and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I resize BOTH the frame AND the image? I used to use the command and shift (to keep the proportions), but NO keys working!

  How do I resize BOTH the frame AND the image?

  I just started using CC online I usually use the command and shift (to keep the proportions), but NO keys work now!

  It's frustrating to have to resize the image and frame separately. The SHIFT key does not keep the proportions more!

  The shortcuts have changed?

  I'm on Macbook Pro - Yosemite.

  Please help me! Thank you!

  In the panel control is a check box resize the content with the framework.

• the blur on the police and the image when I show up with a button

  Hello I have a MSS with image and text, it looks great, but when I put in place a button for the pint to the MSO it becomes blury, the police and the image of the DSO. What can I do with it?

  no idea why this is happening?

  Thank you

  Unfortunately, you can not vector buttons Articles PDF as you can do with scrolling and slideshows. One solution is to have the image of the dead behind an invisible buttons button. If you want an effect! There are some other workarounds. See DPS tips > advanced overlays > sharp buttons.

  http://ContentViewer.Adobe.com/s/DPS%20Tips/7f80a0ffed3a4ff08734bc905aac4a29/Advanced_Over lays/12_button_crisp.html

• Adobe Illustrator and Adobe After Effects problem in the final Version of Windows 8.1

  Hello, I am working in a design where the company legally buy Adobe CS6 Master Collection package recently and agency is migrating its Windows 7 PRO Windows 8.1 new operating systems in its final version.
  
  Yesterday, we realized that the entire suite Adobe Master Collection CS6 works perfectly with the new Windows 8.1 PRO, but programs Adobe Illustrator and Adobe After Effects shows error incompatibildad language, specifically says:
  
  Is not compatible with the language of the current operating system of aplicaion. Open "Regional and Language Options" Control Panel in the Windows Start menu. Then, in the Advanced (under Vista, the Administration tab) tab, change the "Language for non-Unicode programs" setting to match the language of the application.

  Esta aplicaion no are compatible only real con el idioma del operating system. El Abra Panel control "options regional idioma y ' in el menu Inicio de Windows. At c, en her wicked advanced options (in Vista, wicked the Administration), cambie the config ' Idioma para programas not Unicode "para as coincided con el idioma from the application.

  Subsequently we have language Spanish of Latin America is very serious for us because we depend on these programs for execution of our daily work.
  
  I appreciate any help or information on this problem and could more or less know that the solution is ready and whether the problem comes from Microsoft or Adobe, or both.
  
  Thank you very much.

  I see that this thread is was never updated with the hotfix information After Effects CS6:

  After Effects CS6 (11.0.4) updated: bug fixes for rendering 3D traced the beam engine and Spanish version on Windows

• How do I insert and inline image in a paragraph

  Cannot find this answer in the help of HR. Is there a special way to insert an image in the text online, for example in the middle of a point? Here's an example of what I'm talking about, scroll down to the icon of green cable drum.

  http://help.Adobe.com/en_US/RoboHelp/RoboHTML/WS9B67D0AF-955F-416e-9556-A2A062BB2037.html

  I was able to achieve this effect by inserting the image into the paragraph and resizing. But I don't know if this is the right method.

  Well Yes, you do it right. But I could take some issue with the comment "and resizing." It's never a good idea to resize the image within the topic. The quality will be always horrible and the image will take more time to load a wherever he goes live at the point where your username is accessed.

  Assuming that you are happy with this result, I'd say go for it.

  See you soon... Rick