ControlledAccessException while audio playback in the background thread

Similar Questions

• HP19-2113w: how to stop audio playback in the background IE Toyota

  Toyota ad runs in embarrassing background

  Hello @1willow,.

  Based on this post and your other post I suspect you need back up and recover your computer to factory. To save your personal information and ensure it is not lost, I would like you to look at and follow the steps in the HP Support document: backup of files (Windows 8), who will be your personal files are up to date.

  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.

  Then, I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 8) system, which will allow you through to get your computer back to factory settings.

  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.

  If the steps above did not resolve your problem please contact our technical service at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I want to thank you for display on the HP Forums. Have a great day!

• complete execution while the background thread runs

  After the passage of TestStand 4.1 in 2012, I see an interesting problem.

  I start a MainSequence via the SinglePass execution entry point using the parallel model. In ProcessSetup (in the execution of N), I start a background thread that performs certain tasks for viewing. Then the model passes by "Initialize TestSockets" and starts my MainSequence (in year N + 1).

  While the MainSequence is running, run N hangs in ParallelModel.seq > Single Pass, step "Wait for TestSockets", as it should. Usually, when the MainSequence is over, puts an end to execution and execution N goes to the next step "Check to terminate" and some time later, it passes through ProcessCleanup - where I'd send my background thread notification to stop.

  It works as long as I do not start the background thread. But when this thread is running, the execution of N + 1 never leaves the MainSequence. I arrive at a breakpoint at the end of MainSequence, ahead, and then all executions are happily showing a green light and continue to operate on. So running N never leaves "Waiting for TestSockets" and never reaches ProcessCleanup, so my son does not receive the signal of endpoint etc.

  But I distinctly remember that it worked in TestStand 4.1, and anyway, I don't understand this. Why, a background, started in the execution of N, thread prevents the execution of N + 1 to terminate?

  Concerning

  Peter

  "When execution starts a sequence in a new thread (not waiting for the thread to finish at the end of the sequence), should take care at the end of his MainSequence wire in order to put an end to herself in order for execution to terminate?"

  What do you mean by terminate? Process templates are not normally completed executions. Do you mean, "all discussions in an execution must complete before the end of the execution?"? If so, then the answer is Yes.

  I'm not completely your explanations above. I'm not sure what you mean by signs, but I think you're misunderstanding what terminate means in TestStand. Termination occurs only when a user explicitly requests a run to finish (e.g. finish all) or your sequence has an action to complete or by program initiates a terminate. Without endpoint explicit that past, executions normally end when all threads are finished executing. If you are spawning runs and new threads, you must come up with a mechanism to let them know when they have to leave. I do NOT recommend relying on or using termination for this. Termination is as abandoned (but with a cleaning), it is not intended to be something that happens in the normal flow of execution. There are several ways to tell your worker when all discussions. Perhaps this posting you are referring to is a way. You can also use a notification teststand step, or a Boolean value in reference parameter.

  Hope this helps to clear things up,

  -Doug

• How to check that my application is in the context of the background thread

  I'm listening to push into the background thread, but I want to receive the push only when the application is in the background, and then how to check that the app is in the background

  check if it is listed in http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/system/ApplicationManager.html...

• The background thread alert does not work

  Hello

  I have read the article http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/... and followed the instructions to display the background thread alert. However, the alert is not displayed and IU locks (freezes). Specifically, the event of click/touch does not work, but the background thread continues to run.

  Structure of my program. The main class (with the main function) extends UiApplication. I create in the function main instance of the class that extends the Application. This class starts backgorund wire. I am missing something or making the wrong way?

  Sorry I have expired, I was going to write a long response to this.

  But in short, remember that your automatic boot process and your user interface process, both through main with different parameters and are the BlackBerry is concerned, different applications.  So it may be an Application, the other can be a UiApplication, and both can enterTheDispatcher.

  No two instances of the same Application, they are two different Applications.  They can be of different instances of the same Application class, but it is a special case.  It depends on what you create in the main routine.

  You can play a merry dance with such things.  For example, having a UiApplication be started by the automatic boot process, and then the boot gui process can find it and just put in the foreground, rather than creating a new UiApplication.

  Generally however people create a request and a UiApplication.  The problem with the use of these different applications, is that things like static are not shared.  Therefore, use something like RuntimeStore to share data.  It is a pain and something that if I can avoid.

  It is perfectly possible to have a UiApplication, which starts when the device starts, runs Background Threads that are working in a network and is bought in the foreground by clicking on an icon.  Code is more complicated, but not much.  And you must have complicated the code when you run the network Threads background to deal with the unit off power and then power anyway.

  Hope that clarifies somethings.

• How to refresh uicomponents in the background thread?

  12.1.3 Jdev

  Hello, how do I update a component in the background thread?

  I have a utils that refresh method

  {} public void listener (ActionEvent event)

  refreshComp ('pb1');

  } / / This is the refresh

  {} public void listener (ActionEvent event)

  R runnable = new Runnable() {}

  @Override

  public void run() {}

  refreshComp ('pb1'); nullpointer

  }

  };

  Test thread = new Thread (r);

  test. Start();

  } / / not a refresh

  Method to utils:

  FacesContext.getCur... addPartialTarget (JSFUtils.findInRoot (id))

  No, there is not.

  This is the web application, so there are significant differences comparing to desktop applications and things must be implemented in a different way.

  Dario

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Audio running in the background on the computer

  There is an audio and/or video program that runs in the background; I hear the sound of the show; I want to find him and stop him; What is the process to find what is running and turn it off?

  Hello

  ·         When exactly do you get the outside sounds?

  ·         You hear the sound after you have closed all programs in Windows?

  ·         The sound comes speaker internal or external speakers?

  Step 1:

  I suggest you to check the Task Manager and see if any program is running on the background.

  Open the Task Manager by right-clicking the taskbar and then click Task Manager.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Task-Manager

  Identify the process associated with a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/identify-the-process-associated-with-a-program

   

  Step 2:

   

  If you are facing this problem while using internet explorer, check first if any advertising program runs in the internet Explorer window. I suggest to perform the clean boot on the computer and check whether a third-party program is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

  See also:

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• push the two overall display of the background thread

  Hello

  I am pushing GLOBAL SCREEN of my background thread using synchronized (Application.getEventLock ()).

  Now, I want to push another SCREEN on this GLOBAL SCREEN.

  But the new SCREEN is not visible on the GLOBAL SCREEN.

  Please help me

  When you push your overall screen make sure that you also provide a priority:

  pushGlobalScreen (aScreen, PRIO_as_INT, UiEngine.GLOBAL_SHOW_LOWER);

  where 0 is the most high prio (always on top)... I use it to mix screens above the other... Screens with the same priirity will display above the other - the last pushed to win...

• Image of drawing to the screen in the background thread?

  I have image data that comes out of a background thread, and I want to be able to write in a ForeignWindow (or some other window QT I guess... I don't know QT very well). What would be the best way to do this? Is there a good sample somewhere?

  Nevermind, just found the HelloForeignWindow example:

  https://github.com/BlackBerry/Cascades-samples/tree/master/helloforeignwindow

• Application with the background thread

  IDE: Blackberry JDE Version 4.5.0.7

  Simulator: About us - Smartphone BlackBerry 2.9.0.52 Simulator

  Model: BlackBerry Curve 8310 smartphone

  Hi all

  I have an application that, after installation on the BlackBerry must be selected in the application menu only once and will run continuously until it is uninstalled from the device. Code looks like this: -.

  public final class app_name extends Application {   private BackGroundThread _thread;
  
     public static void main(String[] args) {        app_name app = new app_name();        app.enterEventDispatcher();    }
  
      public app_name() {        _thread = new BackGroundThread();         _thread.start();    }
  
      private class BackGroundThread extends Thread {
  
           public BackGroundThread() {            /***initialize parameters in constructor*****/        } 
  
           public void run() {             while(true) {             /*****do stuff using parameters*****/             sleep(10000);           }         }     }}
  

  This code works well. Now, I have to add a user interface that allows the user to change some of the parameters that are used in the thread.

  (1) as a first step, I have to change application to UiApplication to allow pushScreen to use. Since it's a subclass, I would have no problem with this law?

  (2) to get the UI goes, my plan was to declare another class (extends screen) within app_name. What is the right way to go?

  (3) parameters must be manipulated such that there is no risk of conflict of data didn't pack the thread class and the class screen try to access settings at the same time. So using the semaphore will be a good strategy?

  (4) any other questions I may be brought to face or is it better to do this quite differently? I wonder if the instance of the thread class will actually be run side-by-side in the user interface and if the user interface to stop smoking will actually affect the Backgorund thread anyway. It might be better to create a completely separate application for the bit of UI that can access this application settings, but I don't know how to do this.

  My apologies for the long post. Any help will be greatly appreciated.

  Hello

  PersistentObject is synchronized, so that it will not conflict data. You can search for "BlackBerry_Application_Developer_Guide_Volume_2" which has the details of the store persistent in the section "persistent data storage.

  Thank you.

• Problem chart/getting updated when you press on the background thread notification dialog box

  I have a user who is graphical reports strange behviour after our request and only under the following condiitions alarms:

  1 sets of users clock back to trigger the alarm

  2 user locked the BB

  3. the user receives alarm 1 minute later

  4. the user unlocks the BB

  The strange behavior is that the background seems to resemble a back buffer bland with a rectangular hole where the notification dialog box should be.  The user clicks then the graphics and where the button should be back to normal.

  The question is not if the user does not lock the BB first - it's only under the condition of deadlock that the problem occurs.  The user statement also sometimes see a dialog "Please wait" when running our application after unlocking, but never when our application is stopped.

  Model is 8310 with 4.5 and approximately 3 MB of free space depending on the situation-> filefree.

  The dialog box is to be generated and added to the queue by a background thread using the following method:

      private void notifyUser(String msg) {
          UiEngine ui = Ui.getUiEngine();
          EncodedImage icon = Theme.getIcon(false, true);
          Bitmap bm = null;
          if (icon != null) {
              bm = icon.getBitmap();
          } else {
              bm = Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION);
          }
          synchronized (Application.getEventLock()) {
              Screen screen = new Dialog(Dialog.D_OK, msg, Dialog.OK, bm, Manager.VERTICAL_SCROLL);
              ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_SHOW_LOWER);
          }
      }
  

  I checked the problem does not occur on the "BOLD", Pearl Flip, or 8100 with real hardware.  The problem never happens in simulators (tried about 6 models).

  Any thoughts?  Is there something wrong with the code above or spark a dialogue for a non-event like this thread?

  Thanks in advance...

  The workaround for the "locked" State is to implement MemoryCleanerListener in your main application class. This listener is notified when the device is locked. We define a property here "deviceWasLocked", then query this property of our custom popup dialog to determine if we arrive on a locked screen.

  Then we switch our application in the foreground (requestForeground) that clears up this particular issue, and any event goes well.

  The problem of 'missed calls' is a little more complicated, unfortunately, but you're not complaining that one!

  Having said all this, I'd love to see other ideas on how to solve this problem. We strugggled for several weeks with this problem when the 4.3 is released.

• Multiple instances of Application when you use the background thread

  Hi all

  I recently added a background thread in an application that is launched from an other point of entry. This background thread will constantly (every X seconds) carry out checks of RMS and compares the timestamps. When recalcitrant, he sends a notification to the user who launches the application when clicked. The problem is...

  When the user clicks on the notification, it will open the application normally (with the icon and everything), but it also opens a second instance that does not have an icon. I have concluded that the code that actually launches the request isn't the culprit (because if I take out, it nevertheless opens the second instance). This makes me think that it has something to do with the ApplicationDescriptor.

  My notification Manager has this line:

  ApplicationDescriptor appDescriptor = new ApplicationDescriptor (ApplicationDescriptor.currentApplicationDescriptor (), application name, new String [] {});

  If I change this to only return the currentApplicationDescriptor() or add the arguments in the array of strings, notifications do not work.

  Can anyone think of a reason why this is happening?

  I solved the problem I had.

  In the end, I ended up changing this code:

  final ApplicationDescriptor mainDescription = ApplicationDescriptor.currentApplicationDescriptor ();
  final ApplicationDescriptor appDescriptor = new ApplicationDescriptor (mainDescription, application_name, new String [] {});

  TO:

  moduleHandle int = CodeModuleManager.getModuleHandle (APPLICATION_NAME);
  ApplicationDescriptor mainDescriptor;

  If (moduleHandle! = 0)
  {
  ApplicationDescriptor apDes [] = CodeModuleManager.getApplicationDescriptors (moduleHandle);
  apDes = mainDescriptor [0];

  ApplicationMessageFolderRegistry folderReg = ApplicationMessageFolderRegistry.getInstance ();

  If (folderReg.getApplicationFolder (NotificationManager.INBOX_FOLDER_ID) == null) {}
  notificationManager.init (folderReg, mainDescriptor);
  }
  }

  Instead of using the currentApplicationDescriptor(), I was referencing the module of the application itself using the CoreModuleManager. My init method takes in the ApplicationDescriptor and use it for everything.

  Thanks to all who have any time to read my post!

• To access the aggregate Interface customized with KAppBoss in the background Thread

  My aggregate of IID_ABCIINTERFACE custom KAppBoss Interface.

  When I do this

  IApplication* iApplication = GetExecutionContextSession-> ()QueryApplication();

  IQPSAssetCacheManager InterfacePtr<IQPPDPAssetCacheManager> (iApplication, UseDefaultIID());

  AbcInterface InterfacePtr < ABCInterface > (iApplication, UseDefaultIID());

  abcInterface-> xyz();

  hand thread without problem but even of the background gives thread point abcInterface to Null & crash.

  Background threads have a separate session which provides that model interfaces.

  Move this cache to a model plugin Manager.

  Make sure you also it can co-exist with multiple instances of itself - there is one per session.

  Edit: I just realized that you were talking about kAppBoss.

  Most interfaces on kAppBoss are UI anyway, so I guess (without knowing for sure) he is stripped in the same way.

• Menu main movie Audio playback during the film

  Hi all

  Good evening

  I'm watching the X - men First Class movie, I bought a long time ago. Unfortunately, once that I touched READING the menu main iTunes film starts but continuous loop during the movie main menu theme music makes it impossible to hear the audio and enjoy the movie.

  I tried several options, nothing seems to work. Its as if he has 2 windows, 1 of the main menu and the 2nd movie, but I cannot close the main menu without closing the film.

  Any help would be appreciated.

  Kind regards

  No worries found a solution, I just selected the film only in my iTunes list, has not noticed it before. Just goes to the film without having to go through iTunes extra version.