Controller driver of running Vista Ultimate on Satellite A200 mass storage

Similar Questions

• Vista Ultimate on Satellite A200 PSAE6 - FN buttons do not work

  FN + F1, F2 keys do not work for me computer laptop Satellite A200 (PSAE6), installed Windows Vista Ultimate... F 12.

  I downloaded driver Package of added value, but support for the combinations given did not appear.
  Write the reference where it is possible to download the driver. The version of bios is installed later.

  It is desirable, that there are Russian support.
  Thank you.

  Hello

  All available, drivers, tools and utilities can be used with every version of Vista. What is important that all these things must be installed in the order of good facilities. Here, the order of the facilities.

  Windows Vista
  Intel Crestline Chipset utility
  Robson Packege (Intel iMSM Driver)
  Intel Crestline GM driver
  nVidia Display Driver
  Realtek ALC268 Audio driver
  Realtek 8101E 10/100 / Driver LAN Gigabit 8111
  Synaptics Touch Pad Driver (with LuxPad) V9.1.19.0
  ALPS Touch Pad Driver V7.0.301.4
  TI Multiple Digital Media Card Reader V2.0.0.7
  TOSHIBA software modem
  Driver Intel LAN wireless Golan/Kedron
  Wireless LAN driver
  Camera V1.7.130.0330
  Bluetooth Stack for Windows by Toshiba V5.10.06T
  Bluetooth Monitor V3.01 (Build 20070215)
  Enbeded IR V0.0.0.6C
  TOSHIBA Value Added Package V1.0.17
  TOSHIBA Flash Cards Support Utility V1.48.0.3C
  TOSHIBA Hardware Setup Utility V1.48.0.9C
  TOSHIBA Supervisor Password Utility V1.48.0.8C
  TOSHIBA SD Memory utilities V1.8.1.1
  TOSHIBA Fingerprint Utility V5.6.0.3284
  TOSHIBA ConfigFree V7.00.27
  TOSHIBA Assist V2.00.03
  And so on if something is missing from this list.

  See Russian Toshiba page for Russian support.

• Need controller for Vista for my Satellite P200 mass storage

  Hi all

  I did just install Vista 32 bit OS.
  Because I didn't have the chance to use the recovery CD I had to use the new Vista installation.
  In the end, I found all the drivers on the support except for one page.

  * Mass storage controller *.
  * Vista 32 OS *.
  * Computer laptop Satellite P200 *.
  * Model PSPB6E *.

  Could someone show me the way where appropriate driver?
  TNX for all the advice
  Sandi

  Hello Sandi

  All the drivers for your laptop, you can find on the download page of Toshiba

  You can find it on this path:
  Type of Products > portable
  Family > Satellite
  Product series > Satellite P Series
  Model > Satellite P200 (PSPB6)
  Model short-term > PSPB6E
  Operating system > Windows Vista 32-bit
  Driver type > all

  All drivers Vista will be there including the Storage Manager.
  The first document to download, you will see instructions for Installations. Please install all the drivers, tools and utilities following this order of installations. It is very important to install everything in the order of good facilities.

  If you have any other questions let us know.

  Good luck!

• I am running vista ultimate 32-bit and 64-bit so the disk and to install 64-bit on a new PC.

  Salvation as above I am currently running Vista Ultimate 32 bit and have just bought a new computer that is running a 64-bit system, I have a product OPS windows genuine containing both 32 & 64-bit disc. How can I disable the 32-bit to install a clean 64-bit on a new HARD drive. I intend to use a drive to kill to wipe the HARD drive on my old computer but have read that others have had the problem, reinstall the 64-bit version as windows will not activate the license, any help or advice on this would be really appreciated.

  Hello

  Just clean the disk.

  There is no way to disable the function.

  And phone Activation may be necessary when you do what you do.

  You'll probably have to explain to a real person.

  What to is explained in the link.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  Windows Vista SP2 came out mid-2009.  You should have gotten a long time ago.

  How to obtain the latest Windows Vista service pack

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• No sound with Vista Ultimate on Satellite L100-121

  I installed Windows Vista Ultimate and I have NO SOUND on my Satellite L100-121. I received this download area sound-vista - 6015317.zip, installed, but still NO SOUND.

  Need your help as soon as possible.

  Satellite laptop is Vista supported, but at the time where the drivers are not available. If you check sticker on the underside, you'll see this model description (PSLxxx) doesn't match a model on the Toshiba download page.

  Please be patient and check the download page from time to time. I hope that the right driver will be available soon.

• Hard drive problems Windows Vista Ultimate Edition

  Well guys, that it left me speechless.  I recently inherited a laptop from a friend who is fairly new and in good condition.  The laptop, a Toshiba Techra A9, installed Windows Vista Ultimate.  The problem that I seem to have with the laptop is that it will start Windows in normal mode but gets up to a certain point and then hangs up.  I can hear the drive trying to be rolled up and continues to make a rattling noise, similar to a folder that jumps.  The funny thing is that I can turn the machine off and restart in SafeMode w / networking with no problems.  I tried a hard drive cool to think the problem could be a faulty drive, however, the new drive does the same thing.  I installed Vista via the Toshiba Recovery CD, and from the beginning for the first time Windows has frozen, the new hard drive making the same noise as the old.  Anyone out there have any ideas why this is happening?  Install a new hard drive and having the same problem son believe me that it is related Windows or I'll have another hardware problem elsewhere on the machine.  Thank you!!

  Try to check the drivers on the computer to the hard drive. If you can, go to the MMC Console in computer management, go to the Device Manager, and then in the console tree, you should see a line of 'hard drives. Down there, you should be able to see your hard drive. Right-click and click Properties, then go to the drivers of the popup window and note the driver version number. Check on the Toshiba site and see if there are updates to the hard disk driver. If there is, then install it. In addition, you can start safe mode and run your antivirus, assuming that he himself has not been compromised. It seems to be a software problem or driver since you say that you can start safe mode. Timothy

• Installation of Vista Ultimate on Satellite L650 - 1 MM

  Hello

  I bought my Toshiba laptop some time ago and it came with Win7 Home Premium.

  Now I want to downgrade to Vista ultimate... I m not very good on the drivers because there is not under support drivers here... no info if it would work?

  I checked Toshiba's support page and you are right. There is no support for the Vista operating system.
  To be honest I m wondering really want to make this downgrade. It is well known that Win7 works better than older Vista, especially on Vista machines. I've updated several old laptops Satellite models originally come with Vista.

  Maybe you can use some drivers Win7, tools and utilities. Test it.

  By the way: what is the reason of such decommissioning? I mean, I can't imagine that you are not satisfied with Win7. Try to get Win7 ultimate version and install it. in my opinion this is the best solution for you.

• Tecra M5: Cannot install driver nVidia on Vista Ultimate SP1 x 86

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  I also posted this in the Vista forum I felt that it was a problem that is not specific to my hardware, but for vista SP1 in general, also appeared to be a much more active Board

• How is good compared to windows security essentials windows Defender I run vista ultimate 64 bit

  When I run security essentials on my vista ultimate 64 bit pc that I do not in the Add Remove programs and stop some programs from running at startup to the top is normal, because it is not happened on my old windows xp,

  MSE (microsoft security essentials) stops Windows | Defender.

  Therefore, you will not be able to access Windows Defender in order to change some startup programs.

  If this is your problem, here's another way to go to start programs...

  Start > Search box, type msconfig > press enter > at the top, click on start > here is the list of startup programs.

  To disable, uncheck the box in front.

  Press OK when finished.

  > I can't enter in Add Remove programs...
  Why not?

  In Vista, it called programs and features, not add/remove.

• Vista does not recognize the mass storage controller driver

  How can I get microsoft to recognize their own software and files show as my controller driver of mass in diagnostic checks and updates storage?

  * original title - BUG not installed mass storage controller driver *.

  I don't really understand your question. The mass storage controller driver is available from the website of your computer mftr. (if you have a machine of brand OEM like HP, Dell, etc.) and is included in the card mother/chipset drivers OR you would get the driver from site of the card mother mftr. If you have a generic construction machine. You don't want to update these drivers from Microsoft Windows Update in all cases. If you installed Windows 7 and that you have not installed these drivers, this is your next step.

  General information on the drivers:

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• Need driver VGA Windows Vista Ultimate 64-Bit for Qosmio G40 - 11 d

  Please, I want to know how to get the driver for Windows Vista 64 - bit for my Qosmio G40 - 11 d because I can not find in Toshiba driver downloads or N-vidia.

  Consult laptopvideo2go (dot) com - they got modded drivers nForce who will probably walk!

• Reverse the mouse buttons on a laptop running Vista Ultimate

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I want to assure you that I understand what you want...
  You want with your mouse, click LEFT to open and do a RIGHT click to select?
  If so, right-click on a free space of the desktop > customize > mouse pointers > now here is the tricky part. I use a Dell computer. If you do not have a Dell, I'm not sure that you can follow from here. > you have a tab button? If so, click on it > under button Configuration, select "Switch primary and secondary buttons" > apply/OK
  See screenshot...
  

  t-4-2

• partition on hard drive for windows vista Ultimate edition

  Hello iwant to repartition my HDD = 160 gigabytes to install windows vista ultimate on it so I would like to know how to make the partition (C) for windows vista ultimate

  You can decide yourself what size you want, superior to the minimum required by Microsoft, which is 40GBs (which is too little, in my opinion)

  Use the whole 160GBs as I already advised you, or decide for yourself!

  Those are your choices.

  See you soon. Mick Murphy - Microsoft partner