Controller of the export of PP to AE

Similar Questions

• Two questions about the controller of the exporter

  Hi guys,.

  I have two questions on the controller of the exporter.

  1. as the controller of the exporter uses its own user interface, is it possible to generate new files pre-defined in the controller of the exporter to represent its user interface is happy?

  2. how the Ftp settings are stored in the preset currently file? I want to change in my own exporting contronller rather than first UI.

  It will be very appreciated if someone could answer these questions.

  Thank you.

  Hi Alex,

  (1) there is no API to create/modify the presets of the exporter, but as you can see, the .epr file is XML and quite easy to debone in most regions.

  (2) Oh, I forgot this FTP settings checkbox save.  Good fishing!   Yes, the binary data in the .epr are encoded in base64.  The last time I checked (there are several versions), Premiere Pro checksum function is a CRC 32 bit with a polynomial of 0xEDB88320L.  It is not guaranteed to remain the same from one version to the other.

• Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

  First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

  Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

  Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

  The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

  The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

  Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

  My current setup of training:

  My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

  The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

  Problem:

  Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

  I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

  Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

  Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

  Considerations:

  1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

  2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

  I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

  My configuration:

  my configuration:

  CPU - CPU i7 - 3930K @4.5 GHz

  RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

  Motherboard - ASUS P9X79 WS LGA 2011

  GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

  Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

  D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

  Box - Cooler Master HAF X

  CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

  Power - series Pro Corsair AX 850 watts 80 Plus Gold

  Optical drive - Pioneer BDR - 208DBK

  Thanks in advance,

  Eric

  OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

• The exported photos do not appear in the Finder

  I just discovered a quirk in the photos that might confuse some users how it confused me for a while.   It seemed to me to export successfully to the photos and videos from the photos app in a folder on my desktop, but they do not. Everything seemed to work. What was wrong?

  I used the Terminal command to "show all files" and... that is, they were there exactly where I put them. What happened is that I have selected 'use the title' for the name of the file, but I had deleted all the titles, there is no information. Now I realize that I would have changed my preference finder to show all file extensions, and would have shown the speed to the top with nothing else than the extension:

  .jpg

  .jpg (1)

  .jpg (2)

  .jpg (3)

  etc.

  The lesson is, do not delete your pictures titles or if you do, do not export your photos by selecting this option.

  WoW!  It's really interesting. Thanks for sharing this!

  I tried to reproduce this, and of course, I see the same thing on OS X 10.11.4.  The problem is, that a title erasing does not remove the title but creates a blank title, so that the picture has a title that is invisible.

  As a test, import three new photos to multiple:

  

  The first has a title, the other had a title, but deleted, the third party has never had a title.

  When I select and export with title use 'as filename', only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  And even make the Finder always show file extensions will not reveal the exported '.jpg' files in the Finder.

  

  As a workaround solution, do not erase the title completely, but use an underscore character, as in the empty title '_' or similar. There needs to be a visible figure, a space is not enough.

  

  Have you filed a bug report?   Apple - Photos - comments

• Change to error in the export file in the order of the elements in the array of construction

  Hello world

  Some time ago I wrote a vi file that performs the following operations:

  As a first step, it initializes a camera and chooses a region of interest (ROI). Data on the return on investment will be eliminated.

  Then he raster scan engine stage in x and y axis, in bidirectional mode (meaning that x alternating between sweeping left to right and from right to left as is inreased).

  For each point of the analysis, the spectrum is collected, which is then integrated into lambda to give an idea of the total intensity.

  Then the intensity is plotted, as well as the spectrum at each point.

  The final results are exported to a text file.

  The problem:

  If I reverse the order of the son in the 'build' table prior to exporting the file, place the Total Count (intensity) wire instead of thread of the spectrum, the export file fails. By "fails", I mean it's the .txt file contains characters that resemble Chinese!

  Why is this?

  I enclose my .vi, as well as two screenshots that show the problem.

  Hooovahh wrote:

  Such a small change, should not have such a strange result.  I advise to use some debugging tools like highlight the enforcement tools, probe and breakpoint to see what data is when it runs.

  http://www.NI.com/gettingstarted/labviewbasics/debug.htm

  The Source is in 2011.  I see an opportunity and a potential work around certain things to try.

  1. take the following steps
  
  
  • Select each stacked sequence right click and "convert flat sequence.
  
  
  • Select each flat sequence and delete the sequence

  It could simply fix it by itself you want to turn auto-growth on surrounding structures

  2 allows to observe the data in the table build

  • For all wires that are sgl heading construction table insert a dbl and a copy of Allways

  What I suspect LabVIEW is incorrectly re-use of buffers for the inhabitants of sequence

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).

• Trying to export from Ultiboard I can't get the export button

  I am trying to export a circuit of Ultiboard design to a DXF file. The export button is grayed out and non-operational. I can't use either shortcut keys. I tried this with my circuit and a circuit or smaple with no luck. Any suggestions to fix this?

  Hi Ray,

  Have you enabled Ultiboard? Export is not available during the demonstration test.

• cancel the export of the signal at high level

  Hello

  I try to send a short pulse from a meter out to one of the three PFI consecutively. The lines are supposed to be 'high', when I change from one to the other PFI.

  When I export the signal, the road will remain active, which is not what I need from the pulse will be then output to more than one line.

  I tried almost everything I knew, including research forum, but all I find are to know how to cancel the export by setting the PFI in three States. It is not enough that he let the line logically low.

  All attempts to take over the line by a for example a digital camera output high fail on me.

  Can someone help me?

  Thank you

  Michael

  Hello

  So here's the solution I ended up with. Not very pretty, so if someone has suggestions for improvement, I'll be happy to learn.

  Hello

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• Usb host controller on the motherboard how?

  Usb host controller how on the motherboard, and I want the architecture of the controller on the motherboard usb host?

  Hello

  In practice, if you have only 4 Sockets USB, you can only connect 4 USB devices even if your motherboard could, in theory, face several.

  The manual of your motherboard can be downloaded here...

  http://www.gigabyte.com/products/product-page.aspx?pid=3490#manual

  .. What should give you all the technical information you need.

  Tricky

• How to restore the multimedia controller and multimedia video controller to the system?

  How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?

  Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.

• The export could not be performed. An error occurred during initialization of MAPI

  I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.

  I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".

  I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.

  • How can I go on the export of messages?
  • Can I copy the .dbx files and import them into Windows 7?
  • Is there an alternative?

  Outlook is not installed on my PC I want to install it either.

  Concerning

  Mario

  The export is only if you have installed Exchange or Outlook.  Copy the entire repertoire of dbx files to the Win7 computer desktop and make sure that the files are not read-only.  Then, in WLM use file | Import | Messages and point to this directory.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.

  I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".

  I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.

  • How can I go on the export of messages?
  • Can I copy the .dbx files and import them into Windows 7?
  • Is there an alternative?

  Outlook is not installed on my PC I want to install it either.

  Concerning

  Mario

• Cannot add Windows Vista PC to Windows 2008 domain. Error message: an attempt to resolve the DNS of a domain controller in the domain being joined has failed...

  When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field.  I don't know why I can't add my new Windows Vista computer.

  I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP)  I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.

  After initial search for information, I found the following error message when you do a nslookup from my new vista box.

  Nslookup mydomainname

  Server: hqserver64.mydomainname.net

  Address: 192.168.0.99

  hqserver64.mydomainname.NET cannot find mydomainname: Server failed.

  I do not understand why I suddenly get these error messages when I was able to reach this area in the past.

  Hello Stan Smith,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The documentation for the Contacts of Vista tells me to use the export button in the toolbar to use this feature. However, there is no export button.

  Where is he?

  Where is he?

  1. what email program are you using? Outlook Express, Windows Mail, Windows Live Mail, Microsoft Outlook, Hotmail, Yahoo! Mail etc etc?

  2. What do you do with the contacts? Export it somewhere?

  If you are using Windows Mail > open it > menu bar, click on file > click Export > click Windows Contacts > pick CSV > click on the export button > the rest should be self-explanatory.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem, try to install the exporter of Cascades in Photoshop

  Hi all

  Yesterday, I was using the export cascades plugin for Photoshop with no problems. Today, the plugin no longer works. o I tried to uninstalling and downloading from the Web dev site. Now when I try to install it I get an error saying: The Cascades exporter plugin has no valid Signature.

  Can you help me here.

  Thank you

  PS: I use Photoshop CS6, I know it's for CS5 but it worked yesterday.

  This problem has been resolved and the new version will be available for download next week.