Controls upstream App?

Similar Questions

• How the VB program to integrate acrobat pro to create self control upstream

  I would use my vb program to open the PDF in acrobat pro

  then run the vb program the function controls upstream in acrobat pro

  and send the message before the flight.

  Is there anyone able to help?

  Thank you.

  VB has a way to run another program.  It can also pass parameters to it.  It's what you want to do.

• No control upstream on devices

  I have a full class of students looking at me, because none are able to control upstream of their projects. By clicking on the button to control upstream in the dashboard produced a progress bar that flashes by in a split second, but the devices report that there is no content. We have preflighted content, collections, layouts... then for good measure published as well. All seems well in the section overview of models of provision of the dashboard, but it will not just show in the preflight AEM application.

  Very suddenly, it worked for everyone, at the same time, an hour or more later. Must have been some empty back. Sorted, thanks!

• Installed applications do not appear in the control CC app

  I installed several applications (PS CC, 5 Lightroom, first CC and more) the application of creative control Cloud (app name/window title: 'CC').

  However, at some point, some of the apps are missing from the creative application of cloud, but are always installed and works as expected.

  My 'Applications' tab, under the heading "YOUR APPS (1)", show that the CC of Photoshop.

  How can I get the missing apps in the Control Panel, without having to reinstall them?

  (More two more info: Lightroom 4 and/or 5 beta was installed independent at some point before that I started using the creative cloud.) But I reinstalled 5.2 through the CC Eg command app. First CC has never been installed outside the CC app)

  And did a test (with the help of cat Adobe support)

  • sign out and close the application of CC desktop
  • delete %localappdata%\Adobe\OOBE\opm.db
  • Reconnect to CC

  Has not solved, however. Now just try to install first Pro CC in the list.

  BTW: First Pro CC has been installed all the time and works as expected, it does not appear in the installed applications.

  CC desktop application shows same wih Premiere Pro, a button "install". That's what I'm trying now.

  UPDATE: New - great help of Dilip on chat support. After reinstalling, everything works perfectly, and it is listed under installed apps now. (The reinstallation is fairly homogeneous. It's a simple click and a long wait. All settings kept etc.)

• ORA-00214: control file ' / app/oracle/data2/hist10g/control02.ctl' version 1

  Hello team, I get this error at the start of my database.
  
  System Global area 1.8254E + 10 bytes
  Bytes of size 2116304 fixed
  2248148272 variable size bytes
  1.5989E + 10 bytes database buffers
  Redo buffers 14659584 bytes
  ORA-00214: control file ' / app/oracle/data2 / < sid > / control02.ctl' version
  "15166739 incompatible with the file ' / app/oracle/data1 / < sid > / control01.ctl".
  version 15166687
  
  Can someone help me solve this problem.
  
  Thank you

  cool, congratulations! OK, now mark the question as answered to close this thread!

• Conversion of QObject to respective control object (App Development with Cascades API Native)

  I am accessing a control object (button) defined in QML as an object of type QObject in my app.cpp file.

  QObject * click_btn = root->findChild ("click_button");

  Can I convert this type of button so that I can make its use in the connect method. Is this possible?

  It should be simple:

  Button * click_btn = root->findChild ("click_button");

  Or:

  QObject * click_btn = root->findChild ("click_button");

  Button * b = qobject_cast(click_btn);

  On qobject_cast:

  He's trying to drive up his argument to the pointer specified in sharp brackets - type, returning a pointer not no if the object is of the appropriate type (determined at runtime), or 0 if the object type is not compatible. So is it also useful to check if the type is correct.

• SX10 Smart Phone Remote control Mobile App

  I saw a video recently of the launch of telepresence SX10 Endpoint and although the device provided with a remote control basic demo included the use of a Smartphone app to control endpoint.  I don't know if it was an IOS or Android mobile app but have checked on the Appstore and Google game but have been unable to find it.

  Anyone know what mobile OS, the app is and if it is still accessible to the public?  Thank you very much

  Concerning

  David Lawrence

  He is called "Close connection" - on iOS for the moment.

  See https://supportforums.cisco.com/discussion/12161956/cisco-proximity-new-support-community-launched

  Wayne

  --

  Remember the frequency responses and mark your question as answered as appropriate.

• Spell check and control upstream problem

  My spell checker does not work and my control just upstream says check and does not work, any suggestions?

  You have a language assigned to the text?

  Bob

• Control parental Apps and installation of more than 1

  Does anyone know of a parental control application that not only record calls, texts (including deleted), photos/videos, but let me also put time restrictions or limits?  I can't seem to find one that will do everything, but I can not also install multiple applications to achieve. I just signed up for teensafe.com and has it all except for implementation of a calendar. When I tried to download another application strictly for which he said he couldn't because I already have an installed MDM.

  Anyone have any ideas?  Desperate to understand this!

  Contact your carrier and see what are the options they provide for limitation of use.

  You can also return to this thread:

  Is it illegal for teenage girls?

  No, teenage girls is not illegal but there is useful information in the thread.

• Allows you to control two app PCIe-1427 acquisition card program?

  Is it possible that NEITHER MAX poster image and a program of Uart control a camera through PCIe-1427?

  I'm designing on a FPGA board with a link to the camera, and the side FPGA generates the image of the target. and PCIe-1427 Council receives the image.

  I'm contrling the map via USB2UART FPGA, and MAX displays the image. This works.

  but instead of USB2UART, using UART is possible with the terminal program such as putty and teraterm via PCIe-1427?

  In fact, I can't because teraterm cannot see the PCIe-1427 uart port. However neither offers

  device driver, I think it would work.

  If there is the driver that shows the interface UART to PCIe - 1427 as normal COM port, where is it?

  If this is not the case, why is that this driver?

  And there at - it can access any other OR acquisition card that provides the link camera and COM port interface the other terminal program series?

  Thank you..

  Imperx software automatically find the port (I use Imperx camera).

  When the farmed grabber is installed and NEITHER-IMAQ is installed the software should automatically find the camera.

  Have you tried running the capture with Standard camera card? I understand that you create something special on FPGA.

• Spinner control in app Playbook does not?

  Everyone was able to implement successfully tneil spinner control in the playbook? I use the latest source and compile from github (http://supportforums.blackberry.com/t5/BlackBerry-WebWorks/API-Candidate-Spinner-Control/td-p/634388... but it seems to fail at the next line of the code...)

  // Open the spin dialog
      blackberry.ui.Spinner.open(options, function (selectedIndex) {
              alert(selectedIndex); }
          );
  

  .. which leads me to believe he is not taken in charge. Any help is appreciated.

  Thank you!

  Hi drjg22,

  Impossible to use any custom JavaScript extension written in Java (for example my spinner control) on the PlayBook because the PlayBook doesn't currently have a Java virtual machine and the underlying infrastructure is different.

  In my opinion, the blackberry.ui.dialog.customAsk () function provides a bit of a similar interface, but I do not think that this gives the appearance of the carousel.

  Just notice that in the next SDK drop this function will be renamed customAskAsync() to make sure that we don't have any clashes with the Smartphone API.  Thought I'd give you a heads up

• Get integrated control upstream profile (Extended Script)

  How to get the profile embedded in preflight a drawing or model?

  Looping through the profile does not include the embedded profile.

  Is it possible to get it?

  I think that the current embedded profile index is 0, you can do:

  app.activeDocument.preflightProfiles.item (0) .name

• What is someone is this forum an expert using the tool controls upstream in Adobe Acrobat XI?

  "Upstream" will convert the CMYK values to 100%?

  Ok. You are trying to convert one or more specific colours CMYK = (1,1,1,1) or what we might describe as the color of the record (assuming that no spot in the document).

  In Acrobat 11, there is absolutely no way to do upstream or other integrated tools.

  In Acrobat DC, you can create a personalized pre-flight correction to convert a particular to another color using a variant on the profile measure existing color map with the values of the specified color in the category to convert color profiles. It is not for the faint of heart, so to speak.

  -Dov

• Acrobat Pro correction controls upstream: how to associate many colors?

  Hello

  We want to map a lot of RGB with CMYK colors.

  Is it possible to import a list of complete mapping?

  I saw once a table to fill in here. But now I see that the questions.

  How can I switch to table mode?

  Kind regards

  Matt

  You can create a profile of preflight in Acrobat that will map the specific colors for you.

  Here are some basic instructions to get you started and a link to the documentation;

  Go to tools > print > preflight.

  Select the icon of the blue key (changes).

  Find "Color of the map with the specified color values", select it and go to Options (at the top right of the window) double.

  The new profile of the new name, select it and choose Edit.

  I've attached a screenshot of a profile example that will search RGB 155 200 200 and change it to 100 50 0 0 CMYK and also search 200 200 RGB 0 and change it to CMYK 75,0,75,0.

  You must add each color individually, select the button + to add additional colours.

  If you want to map color chart with a specific name, you want to start with a different preflight profile, but it will work the same way.

  Profiles to preflight (Acrobat Pro DC)

  

• 'Transparency' (not CMYK) not allowed, issue controls upstream

  Hello

  I'm having a problem with the option of preflight and transparency. I chose the CMYK for space, a little more merge transparency option and 'use transparency'.

  10 Psd have transparency applied in the Panel info links but they have no more than one layer and the color profile is CMYK Fogra39. Obviously, If I uncheck the 'use transparency' errors disappear.

  How can I remove this value from transparency of the PDS? (A single layer PSD, any applied effects, without channel alpha etc., JPG only imported to the PSD file to convert them to CMYK. I used the PSD to avoid the problem of the quality).

  Thank you to all will answer and help me with this problem.

  

  

  Yes it's true. It is not intuitive, but you can have a number any of transparent objects, il y a until a background layer ID does not see PSD as containing transparency. You can run background layer if you don't want to flatten.

  

  

  ID is the transparency in the top image, but not the version with a background