Allows you to control two app PCIe-1427 acquisition card program?

Similar Questions

• Exposure / white - black voltage settings on the PCI-1410 acquisition card

  Hello

  I use a PCI-1410 acquisition card and have written acquisition software in Visual Basic .NET.

  In measurment studio there is a button that automatically sets the tensions black and white, based on the tensions of entry on the channel.

  I want this impliment into my VB.NET code.  I am aware of the 'CWIMAQ. BlackReferenceVolt "and"CWIMAQ. " WhiteReferenceVolt' properietes, BUT is there something that will automatically adjust the tensions?  I ask because I don't have background no function that will probe to find what is the maximum and minimum voltage that is nessasary to dynamically set the tensions.

  Thank you

  Jonathan

  Through the research forum.  If the solution below to create the IMAQVision control.  IM assuming that the reason why it wasn't available is because I do not have the license of installed vision

  Dim IMAQVision As New NationalInstruments.CWIMAQControls.AxCWIMAQVision
  IMAQVision.CreateControl)

• Can I use two NI PCI-232/4 cards in a PC without conflict?

  I currently have a system with an NI PCI-232/4 card, all the ports used.

  Trying to decide between getting a second card or the upgrade of the current map to one with more ports. If possible, I would just add a second card but I want to assure you that there will be a conflict using two of the same card.

  Hi dcjoey,

  You can use two cards of the same type on the same computer, the system should have no problem telling them apart. 232 new ports will have unique numbers like 232 ports on your first card PCI-232 and your built in COM port. For example if you have 2 devices PCI-232/4 and one built in the COM port, you should see COM 1 (built in), COM 2, 3 COM, COM 4, COM 5 (first map), COM 6, COM 7, COM 8 COM 9 (second map).

  Let us know if you need more information.

  Thank you

  Scott M.

• Allows you to control access VPN PIX

  I have a situation. I want to use Cisco PIX to create 2 VPN tunnels: called "admingroup"(subnet 192.168.10.X) for full access and another called "vendorgroup"(subnet 192.168.11.X) for limited access (only www access to 192.168.1.100). "" "" Admin and the seller will use Cisco for XP vpn clients. But for some reason, the admin and vendor access even. I think I may need to remove the command "sysopt", currently I use admingroup to PIX of remote connection,

  1. can I remove "sysopt" remote control while I vpn in PIX?

  2. why the admin and the seller have equal access?

  Here are the PIX config in a short version:

  permit 192.168.1.0 ip access list nat_acl 255.255.255.0 any

  access-list 101 permit ip 192.168.7.0 255.255.255.0 192.168.10.0 255.255.255.0

  access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0

  access-list 101 permit ip 192.168.7.0 255.255.255.0 192.168.11.0 255.255.255.0

  access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.11.0 255.255.255.0

  out_acl list of access allowed tcp 192.168.11.0 255.255.255.0 host 192.168.1.100 eq www

  permit ip 192.168.10.0 access list out_acl 255.255.255.0 any

  IP address outside pppoe setroute

  IP address inside 192.168.7.253 255.255.255.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  IP local pool adminpool 192.168.10.1 - 192.168.10.7

  IP local pool vendorpool 192.168.11.1 - 192.168.11.7

  Global 1 60.1.1.10 (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 access-list nat_acl 0 0

  Access-group out_acl in interface outside

  Route inside 192.168.1.0 255.255.255.0 192.168.7.254 1

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set RIGHT aes - esp esp-md5-hmac

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 aes encryption

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup admingroup address adminpool pool

  vpngroup dns-server 192.168.1.3 admingroup

  vpngroup admingroup by default-field test.com

  vpngroup admingroup split tunnel 101

  vpngroup idle time 1800 admingroup

  admingroup vpngroup password *.

  vpngroup address vendorpool pool vendorgroup

  vpngroup dns 192.168.1.3 Server vendorgroup

  vpngroup vendorgroup by default-field test.com

  vpngroup split tunnel 101 vendorgroup

  vpngroup idle 1800 vendorgroup-time

  vpngroup password vendorgroup *.

  VPDN group pppoex request dialout pppoe

  A little luck?

• Oracle Universal Installer allows you to install two products together as a stack?

  Hello.

  I'm trying to find a way to combine the facilities of Oracle 11 g and Oracle Weblogic Server using YES. I managed to install both products separately using the silent installation mode in Linux x86_64.

  But my current condition is to perform the installation of the two products together in a stack using YES. Basically I want an installer of preference YES, that can be used for installation independent platform for several products.

  Is it possible to do this with YES? Otherwise someone might suggest would be appreciated.

  Thank you and best regards.

  Prasanna.

  In the past, I've heard of the software package manager, but this could be obsolete way and is unable to support your needs, not sure... Look at MOS for exampleUniversal install & software package Product Overview [68792.1 ID]

• How to find the time between two channels of entry in the data acquisition card or pci 6036

  Hello

  I read a lot-related posts on the simultaneous measurement of two input voltage of similar channels in map data acquisition. I know that the best material is "simultaneous measurments of the Series DAQ cards" but I only pci data acquisition card 6036 and I try to understand what is the time between the reading of the two channels . This period is always constant? (must it rely on a voltage (amplitude, frequency, waveform..). I send the sine wave (s) to the two channels and read the values of V, if they read the same value, the difference should always be zero but I get-0,002 to 0.002 Volt difference (I must find a way to convert it in time). A screenshot of my VI is attached. I wonder how I can accurately measure the time delay between the channel.

  I am open to any suggestion, my final goal to read exactly two channels at the same time ((ou connaître le délai exact donc je peux correspondre les données correspondantes étant donné le temps de retard))

  Hi spinup,

  better you should post your question in the forum of LabVIEW, LabWindows/CVI is used

  Good luck.

• Can I just CC TWO apps?

  Hello, I was interested in investing in some Adobe software, but I don't know what plan I want to... The only two apps I want are After Effects and first, but there is no choice financially advantageous... Pay $20 for a single application or $50 for all applications is a big difference, especially because it's a monthly fee.  It is not by accident a way to get just the first and AE without spending $50 a month? I know I could get two plans unique app but this is kind of a scam.  Thank you.

  You can get two apps, but as far as plans go, what you see is what you get.

  Creative cloud plans

  https://creative.Adobe.com/plans

• Apple: Can allow you parents more control over the access of children iTunes?

  Parental restrictions on mini iPad 16 GB of my granddaughter running iOS 9.3.5 (original version) do not seem to allow parents to control properly the child access iTunes. We have music, news and Podcasts (iTunes), reserved for the 'Clean' as opposed to 'Explicit', but he is always happy that we find unacceptable.

  Apple or someone you suggest a way to further control access of the child to the iTunes app?

  If not, then... Apple - there must be a way to create a framework between Clean and Explicit. You please solve this problem?

  There are other parents who have the same problem?

  Thanks for your thoughts / feedback.

  Apple isn't here.

  This is a support forum user community product technique.

  Aside from Apple employees who are specialist community technical and support the community moderators, we are all users here, just like you.

  If you want to leave a comment on the ability of your iPad to have parental controls more complete, leave your comments here.

  http://www.Apple.com/feedback/iPad.html

  Good luck!

• How to trigger the camera and light pulsed with PCIe-1427

  Hello

  We recently bought an acquisition card NI PCIe-1024 and the NI Vision Builder.

  I am new to imaging applications and need support to get started.

  Application:

  We have a camera viewing a scene which is illuminated by a pulsed light source (e.g., a strobe).

  We want to use the PCIe-1427 as the master for the outbreak of the camera and strobe light.

  The first trigger (Ch 0) transmitting signals TTL to camera to 30 Hz (30 fps).

  The second trigger (Ch 1) send bursts of pulses to the strobe light to e.g. 10 kHz. This trigger must only send impulses all other images, so that we can save alternating light and dark images in order to perform background subtraction.

  I tried to set up the channels of the trigger and create virtual channels in the measurement and Applications Explorer, but apparently this is not possible.

  Since it is an application critical time, I'd appreciate an example vi that sets up the channels two trigger and download managers in the camera to get started on this application. Thank you.

  Software of NEITHER: LabVIEW version 10

  Materials: Device for the Acquisition of Image (IMAQ) PCIe-1427 driver Version: NOR-IMAQ 4.4 OS: Windows 7

  Thank you, Justin.

  I'll copy this request to the machine Vision Group as you suggested. I looked at the link sent you me and made progress (limited). I can see on an oscilloscope trigger signals, and the camera acquires images. However, I only managed to do work for pulse trains continuous, not a shots or bursts of pulses.

  No need to answer that. Thanks for your help.

  Peter

• How to open file extension "apreff-ms" If you cannot download from Apps Store?

  Hi, I have a surface and need to open a "apreff-ms" file extension, on applications, it is not software to open this and the surface do not allow me to download anything outside of the app store.

  Could someone help me?

  Thank you.

  Sonia Maricato

  Hello SoniaMaricato |

  Where do you see the .appref-ms extension? You try to install a program?

  From the Start Page, type in the Panel. In the left pane, click Control Panel to open.
  Click default programs. Then click "associate a file type or Protocol with a specific program.

  You see a list of file type, .appref-ms? I stated it in my Windows 8. The description is the ClickOnce Application. The default to open this type of file is a click once Application Deployment Support Library.

  If please reply back and let us know your answers.

  Thank you

  Marilyn

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• the PCIe-1427 virtual comm port

  The utility of the seller of the SBF - 200 camera allows users to change the time rate and exposure of the image using a specified com port. The PCIe-1427 uses a virtual com port via camera link, but does not reveal the number of users or WINDOWS. Anyone know what it is?

  Attached is a file zipped from the camera to operate the camera Focalplane of Santa Barbara (SBF-200), which has been tested with the NI PCIe-1427 frame grabber Board and LabVIEW 8.2. Assistance of Santa Barbara Focalplane and spectral science, Inc. support are greatly appreciated.

• My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel

  My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel. When I scroll it will only pages and no option available for the adjuments to go through all the 3 lines or more. I thought that I had downloaded the wrong driver but the mouse did not bring a CD or another. Returned to download the specific driver and still can't get in there.

  Hello

  1 have you made changes to your computer recently?

  If the mouse works well, if a setting should be changed the mouse in the intellipoint software, you can contact the manufacturer of the device for more assistance.

  http://www.Microsoft.com/hardware/en-us/support

  For more information you can check the link below.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Concerning

• How can I turn off the "do allow you the program following an unknown Publisher to make changes to this computer?" popup with the application compatibility Wizard? "

  The title says it all really.
  I try to use WinMerge, a program I've used for years.
  Now, every time that I throw I get say popup "want allow you the program following an unknown Publisher to make changes to this computer".

  I tried to use the application compatibility Wizard to solve this problem, and I managed to get to the pop-up window IF I run the program from the inside of the Act.
  But if I try to start the Dowes program I get the popup :(

  I guess I must be missing something in the law so that it works all the time.

  Any help/suggestions appreciated.

  Thank you

  The title says it all really.
  I try to use WinMerge, a program I've used for years.
  Now, every time that I throw I get say popup 'want allow you the program following an unknown Publisher to make changes to this computer?'.»

  I tried to use the application compatibility Wizard to solve this problem, and I managed to get to the pop-up window IF I run the program from the inside of the Act.
  But if I try to start the Dowes program I get the popup :(

  I guess I must be missing something in the law so that it works all the time.

  Any help/suggestions appreciated.

  Thank you

  Hello

  This message appears when the application doesn't have an authority root certificate. These types of notifications can be disabled from user account control settings.
  [1] method: Using Control Panel to change UAC settings
  CAUTION: Turn off UAC is NOT recommended
  • On the start menu, select Control Panel
  • Go to system and security > Action Center
  • In the left pane, select change user account control settings
  • Drag the button scroll never notify
  • Click OK to save your settings

  OPINIONS: UAC can avoid potentially dangerous applications to make changes on your computer. Disable UAC would disable the feature for all programs and not for a specific special application.
  Thank you
  I hope this helps :)

• How to solve the local origin: / / is not allowed by Access-Control-Allow-Origin.

  I try to use the $.ajax call other service, this method of correct running on iphone, android, but failed on Simulator bb10,.

  get the message from the web Inspector:

  XMLHttpRequest does not load http://www.example.com/getData

  Place of origin: / / is not allowed by Access-Control-Allow-Origin.

  I added in the config.xml file.

  I try to google for the solution, but I failed, can anyone help me, thank you.

  I've solved, I think that the blackberry document must provide detailed on webworks settings.

  This losing my several times.