Convergence and oracle Server Contact

Similar Questions

• Convergence and Calendar Server 6.3

  Hello
  We are looking at the Convergence 2.0 upgrade. We always run Calendar Server 6.3. Looking at the wiki page: https://wikis.oracle.com/display/CommSuite/Convergence+Patches+by+Release
  
  It seems that I can install Convergence 2 Patch 2 and still be compatible with Calendar Server 6.3. Is this correct?
  
  We need to get updated so that we have support for more recent versions of Internet Explorer and get our customization done before looking to upgrade to Calendar Server 7.
  
  Thank you
  
  Doug

  Yes, Calendar 6.3 (patch - 44 or higher) is compatible with Convergence 2.

  See https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+Component+Products+Release+Notes#CommunicationsSuiteComponentProductsReleaseNotes-commsuiterequirements

  When you are ready to migrate to 7 calendar, you might be interested in:

  Creating a Calendar Server 6 and Calendar Server 7 coexisting deployment
  https://wikis.Oracle.com/display/CommSuite/creating+a+Calendar+Server+6+and+Calendar+Server+7+coexistent+deployment

  and

  Calendar Server 6 and Calendar Server 7 comparison and Coexistence
  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+6+and+Calendar+Server+7+comparison+and+coexistence

  until the migration is complete.

• Customer of the proceeding within PPP and Oracle server in the same Machine?

  Hello export.

  If we install the application and the server of Oracle database in a single machine, must we always install the client from the Oracle instance?

  Thank you and best regards,

  Tong Ning

  I would use two accounts of the operating system where the application administrator and database administrator are held by different people with different responsibilities.

  It is not critical to maintain client inventory with the server.

  Hemant K Collette

• Interlink with Sql server and Oracle

  Hello
  
  We have some data in SQL Server.
  We need to link SQL Server and Oracle Database. To make reports in Oracle Apex.
  
  Please someone guide me to interconnect with Oracle database
  
  Kind regards
  Thérèse

  Therese,
  You can find more information on gateways in this available in My Oracle Support note-

  Note to master for the Oracle Gateway (Doc ID 1083703.1) products

  Kind regards
  Mike

• Oracle Weblogic server and Oracle Application Server

  The Bea weblogic and Oracle application server have been combined in a product-viz Oracle Weblogic server.
  
  Please clarify - because Oracle Application Server is always available as a separate offering
  
  
  Thank you

  Yes, since version 10.3.4 the product called Weblogic Server provides the two "BEA WLS' and 'Oracle AS' characteristics (namely, support for forms and reports, ADF, etc..)

  Existing customers of Oracle ACEs can move to Weblogic Server to get its benefits (for example, JRockIt JVM). For the new Oracle AS it is no longer available.

  BTW. This is not a good forum for this kind of questions. You must use these: https://forums.oracle.com/forums/category.jspa?categoryID=193

• Number of databases such as Oracle and SQL Server in the same application ADF

  Hello
  
  In my application, I need to use two different databases such as Oracle and SQL Server. There are screens that I need to develop in the ADF where I need to involve fields of the tables in these two different databases. I just want to know - is it possible to do so in application of the ADF?
  
  Or to create a sort of link between these databases in the backend? Then create a view object involving some distributed SQL queries. What can I do with this type of request than anything? I mean, can I use the two insert or update operation using this VO?
  
  Or y at - it another way to do this?
  
  Please help, help here would be really appreciated. I've been stuck with this problem for a while now. I did search our forums for the same problem, but was not able to find a reliable solution.
  
  Thank you
  Vijay

  It's still not clear to me if you need two db tables in a query, or a transaction.
  If this is the case, your best option (to my knowledge) is to use a db link. in this way, you only need to access (for example the oracle db) and can access the objects from the other data from the oracle database.
  I don't understand
  >
  (3) a model project with a meeting of the two datasource. I selected a data source and created OT and VO. When I have selected a different data source and select tables to create VO and EO and finished but these EO and VO is displayed in project. >

  (2) If you need to link data from these two dbs you can not use this approach (see the note at the top of the post)

  Timo

• Difference between oracle and Oracle Application Server Developer's costume?

  Hi all
  
  If someone please tell me the main difference between the costume of developer and Oracle Application Server.
  
  I will be very thank ful.
  
  Thank you
  
  Hina.

  You would need an application to host the application, but each user could access this application using a browser. So the obligation for each user is simply a browser with an appropriate Sun JRE installed - this JRE (if not already installed) can be configured to be automatically downloaded and installed on the client from the application server.

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• How to stop and start the CEP oracle server?

  I want to start and stop the CEP oracle server without using the eclipse IDE. How can I do?

  you first need to know where the field is and then go into the directory of the server, run startwlevs.sh or stopwlevs.sh.

  for example, assuming you are using example helloworld, you are to $FMW_HOME/ocep_11.1/samples/domains/helloworld_domain and then go to the defaultserver directory to run the startwlevs.sh script

• WebLogic and Oracle Application Server

  Probably a stupid question, but what is the difference between WebLogic and Oracle Application Server or are they the same thing?

  Hello

  Please find below the link... It can erase some of your doubts: -.

  http://orachat.com/Oracle-application-server-Oracle-WebLogic-Server/

  Thank you
  JD

• Unlike char in ORACLE and SQL SERVER

  Hello gurus,
  
  I tried to querying data from Oracle to sql server through linked server, but get me an error! set length corresponds to the error! I know there are CHAR data type in sql server and thus as in oracle.
  
  But when I use the CAST FUNCTION with CHAR it works fine
  

  -- error code 
  
    select * from openquery( linkoracle11 
             select  col1, col2, col3 from test_table )
  
  
  -- say col3 char(1)   -- data type

  ---
  
  

  -- working code 
  
    select * from openquery ( linkoracle 11 
             select  col1, col2, cast (col3 as char(1)) as col_3 from test_table )

  I was wondering, what is the difference between oracle and sql server for the CHAR data type?
  
  The gurus of the idea?
  
  Thank you

  What is the error you get?

  What is the characters in database and NLS_LENGTH_SEMANTICS game on your Oracle system?

  SELECT *
    FROM v$nls_parameters
   WHERE name LIKE '%CHARACTERSET';
  
  SQL> SHOW PARAMETER nls_length_semantics;
  

  What is the character set of data in SQL Server?

  If your local database is a variable length character set (like UTF8) and NLS_LENGTH_SEMANTICS is set to (default) BYTES, a char (1) allocate 1 byte of storage which may not be sufficient for a single character. The receiving application may need to allocate a buffer with 3 times more many bytes as there are characters in order to ensure that it will be able to process the result. I don't know why add an implicit CAST that would change, but since we are several levels removed from the code to figure out how large a buffer to allocate, it is not very surprising.

  Justin

• [Upgrade to 2.1.0.63.73] JDK 1.6 and Oracle 10 Server XP 32 question

  Hello
  
  I wonder if I will still be able to use the server Oracle 10 if I install JDK 1.6 (required to upgrade SqlDeveloper)?
  
  Here is the output of java-version in the directory of the Oracle Server
  
  D:\oracle\product\10.2.0\db_1\jdk\bin > java-version
  Java version "1.4.2_08.
  Java (TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08 - b03)
  Java Client VM (build 1.4.2_08 - b03, mixed mode)
  
  And in the Sqldeveloper folder
  
  D:\oracle\product\10.2.0\db_1\sqldeveloper\jdk\jre\bin > java-version
  Java version "1.5.0_06".
  Java (TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06 - b05)
  Java Client VM (build 1.5.0_06 - b05, mixed mode)
  
  What is trust the installation to place java 1.6 in the sqldeveloper\jdk\bin directory?
  
  Thanks a lot if you can help

  If you're afraid to ruin the other software, why not download the SQL Developer provided with the JDK? It resides inside the SQLDeveloper folder and to my knowledge it does not interfere with any of your other installed JDK.

  You'll want to put new facilities of SQL Developer in their own folder, not in the SQL Developer folder.

  Published by: DylanB123 on March 23, 2010 11:39

• data replication with ODI between SQL SERVER and ORACLE

  Hello world
  First of all, I want to migrate database SQL SERVER and ORACLE DB tables.
  And then make online (synchronous) replication from SQL SERVER to ORACLE using ODI.
  
  I have not used before ODI.
  How to use the ODI for this?

  1. create a master repository and connect to the "topology Manager.
  2. in the topology Manager, you must configure the following
  2.1 create a data server for the Oracle under Oracle database in the physical connection
  2.2. create a database for the SQL Server database server in SQL Server in the physical connection. To do this, the jdbc for sql server driver.
  2.3 implement the logical connection and frame
  2.4 create a workrepository in the topology manager repositories tab
  3. connect to the designer and follow these steps
  3.1 create a template for the SQL Server source and reverse (import) the datastores (tables) to the model.
  3.2 the value of the model for the target of the Oracle
  3.3 create a (mapping) interface, under the table in schema define the source and then add it to the target and bind
  3.3 on the flow tab, you must set the Modules (KMs) of knowledge to perform the load. You must have imported the KMs before creating the interface.
  3.4 in IKM put 'create table traget' to 'yes '.
  4 run the interface to load data from SQL to Oracle Server

  Thank you
  Fati

• Can I install the Hyperion, WebLogic, and Oracle products on the same server

  I want to install 11 Hyperion, planning products and related products in a production environment. I find the following statement in the document of Hyperion: "the application server and the Hyperion product that you deploy must be installed on the same computer." This confused me.
  
  The next is what I think: weblogic server in sever installation 1 (UNIX), install the Oracle server in 2 performance management (UNIX) and install Service Foundation Hyperion Essbase, server and Planning Server 3 (Windows), it's a good solution? What I have to install Weblogic and Hyperion server products in the same Windows machine?
  (Here, contain the Oracle Hyperion and Hyperion willl deployed on Weblogic server repository data). Can recommend you a better solution? I think that, if I use multiple servers for different purposes, the performance may be better.
  Please advise and correct me, thank you!
  
  Bob

  Yes, if you need to share the burden between products that use web applications then you need to install weblogic on servers that you divide to load between.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Sort of the differences between Oracle and SQL Server

  Hi all
  
  This question is linked by both Oracle and SQL Server
  
  I have a requirement where I want to compare 2 tables line by line. A table is in Oracle and other table in SQL Server
  
  And suppose that both tables do not have a primary key. Now when I sort records by using the order by clause for a column, then-
  
  Rows with null values in that column of Oracle are placed in the background.
  When that rows with null values in the same column in SQL Server are placed right at the top.
  
  How can I make one of them to behave like any other.
  
  My only goal is to have same order of lines in Oracle and SQL Server tables so that I can compare line by line.

  YADQ: Yet another Doc Question

  Can you please avoid them?

  Take your SQL reference manual, search for the ORDER BY clause and notice that it has
  NULL FIRST or LAST values NULL values.

  ------------
  Sybrand Bakker
  Senior Oracle DBA