Conversion of .fla in html5 Canvas - how 'start' to work again?

Similar Questions

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again?

  Why my internet has stopped working

  My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.

  http://support.Microsoft.com/kb/321448

  http://support.Microsoft.com/kb/311766
  In some cases, you must remove the cookie as well.

• [HTML5 Canvas] How to change the scene?

  Hello

  I have an animation created in a HTML5 Canvas document. When seen in the browser, it is displayed in the size of the document, which is not surprising, but what I want to do is display the full window size, scaling to fit. Basically, I'm looking for the equivalent AS3 scaleMode and align with the SWF in height and width to 100%. The publication settings is not all the options related to the scaling, so I don't know where to look. How should I do this?

  Thank you!

  -Aaron

  Hi all

  Sensitive scaling options are now part of the HTML5 canvas publication settings in the latest version of animate CC (2015.2)

  See here: new feature summary (June and August 2016)

  Creating ads with CC HTML5 animate: canvas reactivates the scale. Animate Adobe blog

  Update your copy of Animate through the creative application of cloud and try it now!

• HTML5 canvas how to use movieClips created onstage goToAndPlay()

  I created a simple slide show and a series of small navigation buttons on the platform of html5 canvas. The goToAndPlay() function works OK on the main timeline, but not on timeline timeline navigation buttons. I don't know enough createJS to find a workaround. Journal of said browser gotoAndStop is not a function. I just want to do a mouseover and mouseout/mouseouthandler() managers, the button can play the role of his chronology.

  Any ideas?

  You must reference the movieclip.

  for example, if you try to control the movieclip as well as one that contains the code, use:

  this.gotoAndPlay ();

  not

  gotoAndPlay();

• Flash for html5 canvas - how to target instances "cloned".

  I have a Penguin object that I duplicate several times throughout a quiz of canvas, html5, with code like this (Simplified):

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  Whenever a new issue is reached a new Penguin is added to the screen and the 'slideAbout' function it allows to drag around independently on the screen. So at the time wherever you get to q10 there are ten penguns all independently sliding on the ice. Everything works well.

  What I want is, if a question is answered correctly, all these penguins jump up and down both on occasion.

  I can do the jumping animation, but I can not understand, the main script, how target these dynamically added penguins.

  If I had added them manually, I could just have targeted the with the name that you add in the Panel of the label, one as the name for AS3 "instance".

  But when they are added using the "new"lib"above method I can't find a way to get them to hold them. The "name you can add with '.name' doesn't seem to work as the 'instance' name - I just get a js error if I try to use it."

  I hope someone can help me - thanks in advance!

  There are a few methods to achieve this.  It would be to add the penguins to a parent who has children of Penguin and another would be to use an array to store the references of Penguin.

  the last submission:

  this.penguinA = [];

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  this.penguinA.push (clonedBlock);

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  so you want to reference your penguins, loop in your table

  function jumpF() {}

  for (var i = 0; i)<>

  do whateve with this.penguinA [i];

  }

  }

• out of HTML5 Canvas flickers at the beginning

  Hello

  I'm reformatting Flash for html5 canvas via animate. Works very well, but after you publish the animation to eject at the beginning (not during operation).

  Any idea?

  Thank you and best regards

  Before your graphics load, if you do not have a preloader it will be a "flash" of just the background color of the canvas before appear the graphics.

  If please try my suggestions above and let me know how they work for you.

• Publishing HTML5 Canvas banner to the DCM.

  Hello

  I made a HTML5 Canvas banner and it works without any problem when I publish. The preview works well, when I download to test the banner in Google DCM.
  The Uni canvas background color shows up, and the "clickTAG" works, but the animation is not displayed.

  Any ideas on how I can fix this!

  Someone at - it a similar situation with Flash HTML5 Canvas to DCM?
  

  Help, please. Thank you
  

  PS: I looked at all the directives and documents to respect my banner to the rules, but still it does not work correctly...

  DCM comes out a validator tool that should be useful for a lot of people: DoubleClick campaign manager | HTML5 Validator

  There is one for DBM too: Director of the candidacy of DoubleClick. HTML5 Validator

• How to add video to a HTML5 canvas document?

  It was something super simple onboard animate. I just moved a file .mp4 on the canvas and used the property inspector to allow loop playback control and scaling options.

  Now if I try to drag a file to .mp4 on canvas, nothing happens and if I try to import in the library I get the error "one or more files were not imported because there is a problem reading of their.

  I thought that I will try to be smart and start by creating an ActionScript project and convert it to HTML5, but conversion does not my video object.

  So, how can I include a .mp4 file in my HTML5 canvas paper?

  Do you mean import it into Animate and place it on the timeline? Or do you mean just have a canvas document read an external video file?

  I think (not 100% sure) the first is impossible. The latter is quite possible, but you have to code yourself. See this thread:

  How to load the video in Html5 Canvas?

• How to convert (Action Script 3.0) .as files to work on HTML5 Canvas?

  So I did an ActionScript 3.0 game in CC animate using files as with packages and classes rather than use actions for example

  There is a Game.as file:

  package
  {
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.utils.Timer;
  
    public class Game extends MovieClip
    {
    static var ship:MovieClip;
  
    function Game()
    {
    ship = new Ship(stage, 200, 100);
    var spawnTimer = new Timer(3000);
    spawnTimer.addEventListener("timer",spawn);
    spawnTimer.start();
    }
  
    function spawn(e:Event):void
    {
    var enemy = new Enemy();
    stage.addChildAt(enemy, 1);
    }
    }
  }
  

  I used the commands > convert to other Formats of Document and you select HTML5 Canvas. When I run the project all the code does not work because the .as files are not related to the project (because it is a HTML5 Canvas). So, how can I convert my project an ActionScript 3.0 for a HTML5 Canvas so that the scripts work in the game? Should I use. JSFL files? How to bind the?

  Thanks in advance.

  There is no external class in HTML5 Canvas Javascript file. Also, the variables are not typed. Symbols belong to the library, which will be shortened to 'lib '. You can define listeners on the createjs. Ticker, but using setTimeout() is a simple alternative.

  In view of this, your AS3 could be something like this:

  boat var = new lib. Ship();

  Ship.x = 200;

  Ship.y = 100;

  stage.addChild (ship);

  setTimeout (spawn, 3000);

  spawn() {} function

  enemy of the var = new lib. Enemy();

  Enemy.x = Math.random () * 500;

  Enemy.y = Math.random () * 400;

  stage.addChildAt (enemy, 1);

  setTimeout (spawn, 3000);

  }

• How to call a function of my html code to js created by animate cc, I had used 'exportRoot.functionName' and said this function in my document of flash pro with html5 canvas, but now on cc animate this way doesn't work.

  My html code created by animate cc was changed to php for me, because I send and received variables via get and catch the cookies and much more. the function that I used to call function on my .fla of the document is passId() and it worked before when animate was Flash pro with html5 canvas.

  

  And function of .fla, I frame_0 only assign to the variable "id_usuario", this is the feature on fla:

  

  First of all, the title of your thread is horrible. Titles are supposed to be securities, not paragraphs.

  As for your problem, you are probably trying to call catchIdUser before it is defined. handleComplete() is raised when the content is ready to run. He did not actually yet. I guess you should have script code call the function of window parent, not the other way around.

• How to disable the cc button animate html5 canvas files?

  Hello!

  How to disable the cc button animate html5 canvas files?

  ex:

  this.mc.on('click',function(){alert('this')})
  this.mc.enabled=false
  

  question 1:

  When you click on the 'mc', it always run. How can I control the button of the deactivate and activate?

  question 2:

  The mc is not an image, it's a movieclip. How can I change the colors of the mc? example: default of the mc color red, I want to click change black!

  Thank you!

  use addEventListener instead of 'on '.  You can then use removeEventListener to disable.

  or you can intemperies to use 'on' using the mouseEnabled property to disable this.mc:

  this.mc.mouseEnabled = false;

• How can I add videos into CC animate HTML5 canvas?

  Hello

  I'm trying to incorporate some videos in cc Animate html5 canvas export as html5, but I'm not able to import or migrate from other versions to the html5 canvas. Is it possible to do

  @ ! !

  How can I add a video

• How to 'split' text mode 'HTML5 canvas "?

  'Split' option is greyed out in HTML5 canvas. Is it bug or feature? How break apart text or convert the text to a path access/plan?

  Thank you

  Hi Marek,

  In addition to the Typekit web fonts, Google fonts are now supported in HTML5 canvas documents in the last update of CC animate (15.2.1) comes out.

  See here: new feature summary (June and August 2016)

  By using the Google fonts to animate CC

  Update your copy of CC animate through the creative application of cloud and try it!

  Thank you!

  Mohan

• How to use video with HTML5 Canvas alpha channel? is this possible?

  How to use video with HTML5 Canvas alpha channel? is this possible?

  Thanks in advance

  There is a video in HTML5 tag, as there is a canvas tag. But you want to alpha. He is not an alpha channel in HTML5 video.

  Transparency alpha in video Chrome | Web - developers of Google updates

  Tag video example

  video controls style="width:640px;height:360px;" poster="poster.png">
    type='video/webm;codecs="vp8, vorbis"' />
    type='video/mp4;codecs="avc1.42E01E, mp4a.40.2"' />
    kind="subtitles" srclang="en" default>