is there a driver for the faxphone l80 printer that works with Vista home edition

Similar Questions

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  It is not listed in the list of printer drivers and I can't find anywhere on the web.

  Hello

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-950/drivers-support?target=article&Extn=.html&articleid=3394

  This article from Epson says that the driver is included in Windows 7.

  I don't see any info out there that clearly explains how to add it.  It simply States that you must go to "add a printer".  Looks like you already did this well.

  I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Greeting cards

  Hello

  Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Hi, the paint that comes with Windows Vista is designed by default design. See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  It will be useful.

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• The scanjet2200c of hp can work with Vista

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I have Windows Vista and I want to try to set up my hp scanjet2200c. The scanjet served when I had Windows XP but now I have Vista. My guess is it's not compatible, but I thought that maybe there was a driver who could make it work. I'm wasting my time trying to make this work?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  N ° it won't work with Vista

  HP has not written the Vista compatible drivers for it.

  HP has written drivers for their products.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=57854&LC=en&cc=us&DLC=en&submit.y=4&submit.x=4&lang=en&cc=us

  Above link shows operating systems, it works with; Vista is not among them.

  See you soon.

  Mick Murphy - Microsoft partner

• My version 10.4 of Mac is not compatible so I deleted Firefox completely. How can I get the old version (one that works with my system) back?

  I have a Mac OSX 10.4.11. I installed the new update of Firefox and when I tried to open it, he said that it was not compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox - or any version that works with my system. Thank you!

  Please change the download page for other people do not have this problem. He said that the new version works with Mac OS 10.4 and more - I checked before downloading. I'm happy, there is a solution, but the download page does not. Don't use other people waste their time like I did.
  When you download 3.6.24 new version downloads right thereafter. I closed it, but this looks like a glitch.
  Thanks again for your help and to continue to support the old version. Firefox is a great browser.

• Conversion of SSD drive for the reader to boot on m7 with Win8

  I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

  The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

  The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

  So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

  I don't know what the problem is.

  What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

  I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

  Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

  Any ideas out there in the land of the experts?

  Vachsen wrote:
  

  Thank you, erico, for advice.

  I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

  So far, I've done everything suggested this that caramel:

  -Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

  -Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

  -Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

  -The series 160 GB 320 firmware was up to date.

  -Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

  -Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

  -Enabled secure boot.

  Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.

  
  

  When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

  A number of things, I noticed I did upgrades:

  -The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

  -The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

  Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

  Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

  The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

  The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

  You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

  The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

  Dan

  Intel also recommends the free use of third parties such as cloning utilities

  http://www.EASEUS.com/disk-copy/

  http://Clonezilla.org/downloads.php

  http://www.partitionwizard.com/products.html

  EASEUS is, in my opinion, the best of the three.

• Pavilion 4070 - us: new hard drive for the recovery disks do not work! Help!

  Hi - the hard drive on my Pavilion 4070 - crashed us, so I bought a replacement - a Samsung SSD 850 EVO, 256GB drive.  The problem is that I can't seem to get the recovery disks to work, and neither Microsoft nor HP is willing to help me.  Of course, Microsoft tells me they don't give me any help for Windows7 OEM versions and HP said that my product is no longer supported so they do not help me.  This is ridiculous - I own a legal copy of Windows 7 and I can't get any help from the company who sold me the computer?

  What happens when I go through the process of installation with the recovery discs, is that instead of the Windows installation continue as it is supposed to, I have "no boot device - insert boot disk and press any key any."  I'm desperate, I tried two different options - one was the minimum image recovery, the other was a factory restore.  Nothing seems to work. What can I do?   Moreover, the original hard drive is not * completely * dead - I can still access most of the data on it.

  Hello:

  Yes... It works fine for me.

  Here's the source Web page.  Select the download link of W7 Home Premium x 64 from there...

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page58?p=469389 & viewfull = 1 #post469389

• Driver for the hp 1505n printer

  Hello

  I have the Hp Laserjet 1505n printer

  I need Driver for Windows 8 64-bit support

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=3435671#N200

  Kind regards.

• Windows 7 is not mapped to a network drive with the same information that works with Vista

  I'm trying to map a network drive that connects via a VPN.

  The exact information and references work very well on an old Vista machine but do not work on my Win 7 Professional machine.
  Thanks in advance.
  Ray

  Hello

  I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  They will be able to guide you to the best.

• TWAIN drivers for my Epson Perfection 610 scanner that works with Vista 64

  I searched high and low for the two pilots that would allow me to continue to use my scanner Epson Perfection 610 on Vista 64. Except for the purchase of a costly program to scan, I am confused. Is there generic drivers that would work? Thank you.

  DRD, I imagine that you must have a HP computer with the Epson scanner attached to it.  Since it is a HP forum, it would be best to contact Epson to find a driver for your scanner.

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.