convert 2013 screws in 2012

Similar Questions

• Easy way to convert screw screws from 2012 to 2011

  Community of greetings OR.

  Quick question - I hope so fast - I have written screws in 2012, but some people I work with that ask me to send them in 2011. And I thought you could cut and paste, and unfortunately, I discovered you can do that!

  Is there a way of "back - convert" screw screws from 2012 to 2011 for those who have not upgraded to 2012 yet?

  Thank you!
  TheLT

  File menu, except for the previous version

• Why can't I convert my Windows Server 2012 R2 Core GUI

  

  Dear friend,

  I installed windows 2012 base r2 and later I wanted to convert the heart to GUI. For this I executed as a result of processes.

  # run cmd as administrator

  # powershell

  # Import - Module ServerManager

  # Installation - WindowsFeature Server-Gui-Mgmt-Infra, server-Gui-Shell - restart

  After completing 68%, I am getting above error (Please check the screenshot).

  Someone please let me know how I can fix this problem?

  Thank you very much in advance!

  Best regards

  Abhimanyu

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• OR LabVIEW Student Edition Software Suite 2013 with toolkits 2012 cannot load

  OR LabVIEW Student Edition Software Suite with LabVIEW 2013

  The toolkits LabVIEW which accompanies the software were dated 2012 and therefore will not instal without prior agreement of LabVIEW 2012 installed.

  2012 LabVIEW Control Design and Simulation Module
  2012 LabVIEW MathScript RT Module
  LabVIEW 2012 LEGO MINDSTORMS NXT module
  Module OR Vision Development 2012
  LabVIEW Toolkit 2012 Digital Filter Design
  Toolkit OR Modulation 4.3.3
  2012 LabVIEW System Identification Toolkit
  LabVIEW Signal Express 2012
  NEITHER Vision Builder for Automated Inspection 2011 SP1
  NEITHER Vision Acquisition Software 2012.08

  Thanks for any help

  Mike Petrowski

  Hi Mike,.

  Have you tried to download versions of 2013 from the web page? That is to say:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/es/PG/1/q/control%20Design%20&%20Simu...

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/es/PG/1/q/MathScript%20RT%20Module%20...

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/es/PG/1/q/LEGO%20MINDSTORMS%20NXT%20M...

  Another option would be that you install LabVIEW 2012 and try again to load the 2012 versions.

  Concerning

• Convert 2013 for 2009

  Hello world. I'm saving a .vi in an earlier version of LabVIEW 2013 for 2010, but it says there is an error and the message that I show in the attachment.  I discovered that the block which is the cause of the pain is one called 'Display Message to user Express VI. You can find it in the functions/programming/dialogue and Msg/display of the User Interface. All that being said, the question is... Can my .vi be converted in an earlier without having to replace the block 'display a Message"for any equivalent block from a previous version?

  IM sending the Pruebafinal.vi (the master vi) inside the asdf.zip so if it is possible, you can help out me and convert it for me.

  Thank you.

  I get an error when I try to open this express VI on your diagram.  Personally, I would replace it by a case structure and function of dialogue 1 inside button.

• Convert TCPIP_Nagle_algorithm.zip 2012 LabVIEW LabVIEW 2011

  Hello

  can someone convert the screw in the zip file of the LabVIEW LabVIEW 2011 2012 please. I need them to study.

  Thank you very much for your support.

  In addition, I'm sorry that I put my post in LabVIEW and non-Conversion of the Version

• 2013 icon Editor bug?

  I searched and didn't see this class as a bug, but I seem to have problem whenever I used the function icon text rather than simply using the text tool.

  2013 SP1

  

  2012 SP1

  

  I saw this problem, but always on the screws that were initially created on an older version of LV the solution is to clear all layers (clear all from the Edit menu) and rebuild the icon.

  Mike...

• Convert file communication labview vi file

  How convert on design communication Labview in Labview .vi file and vice versa?

  Hello Joseph,.

  Thanks for joining the community!

  There is a Code Conversion utility that converts the screws in this.

  http://www.NI.com/download/code-conversion-utility-for-LabVIEW-communications-1.0/5093/en/

  This is not a conversion opporuntiy. We recommend that you test your code after conversion to confirm its operation. This is because currently LabVIEW Communications support all LabVIEW features, such as event Structures.

  Unfortunately, there is no method to convert this screw is because the LabVIEW Communications has a different set of functions that are not supported in LabVIEW, such as the diagram of multiple rates.

  Kind regards

• Screw worked in LabVIEW 2009 but do not work in LabVIEW 2010

  The screws were initially written in BT 7.1 but then compiled in 2009 LV, and saves. These screws worked well on the Windows XP machine.

  Unfortunately, the XP machine was crushed and I try to run these screws in LV 2010, with windows 7, 32 bit.

  I installed the traditional DAQ drivers (latest version, 7.5) alongwith DAQmx (version 9.8).

  We use these VI to control valves of depression, using PCI-6503.

  To begin we first use a VI that reset the valves and the PCI card. The name of the first vi is: portconfig.vi this port and port config vi uses write screws I see error 10401 port config vi, when I run, step by step (i.e., sequence 1). However, the VI work but do not do any actual work.

  The second VI which depends on the first VI and therefore the second VI also does not work. on this VI, we have buttons (representing the valve) and when you click on them, the valves must close or open, but nothing happens in LV2010. the same screws worked in LV2009!

  Card PCI-6503 is defined under devices and interfaces in MAX. It is not defined under DAQ devices. When I test PCI-6503, it works.

  I enclose the two screws (there is in QuadMain.llb). I don't know how to get the real VI of your hard drive...

  first open portconfig.vi

  then open Control Panel.vi

  There are global variables used in the Panel.vi control, there are listed in the Global.VI Valve, which is located in globals. LLB second attachment).

  I really appreciate if someone can convert these screws for LV 2010.

  
  

• Convert static Dispatch VI VI dynamic distribution

  I'm having a slow day, so I hope that someone else is working this Christmas and can answer this for me:

  I want to convert some of my class of LabVIEW static Dispatch screws of dynamic distribution. I thought it would be as simple as changing the types of terminals for the entry class and outputs "Dynamic Dispatch Input" and "Dynamic Dispatch Output (recommended)", but when I try that they are ghosts. I know I'm tired right now and I can't wait to go home for Christmas, but I can't seem to understand this (and I'm sure that I've done it before, so I know it's possible!)

  Can anyone help?

  (Merry Christmas!)

  OK, nevermind, I realized what I was doing wrong. I tried to convert my screws of wrapper, using a type of data without class, and indeed the method called that live inside can be converted to dynamic. Silly me!

• TPC-2012

  After the update to 2013 LV tpc-2012 in the labview project is marked "unsupportede device". How can I change this? Must I update the software? Where can I find software current?

  Thank you

  Christian

  chrisosw wrote:

  This means that more no update for Labview.

  This is what it looks like. They want that you upgrade to PTC-22xx for future versions of LabVIEW from 2014 of LabVIEW.

• VI LabVIEW 2012 script: Method - delete not yet implemented framework

  Hi all

  I use screws LabVIEW 2012 script to delete the events to the event structure. For some reason, I get the following error

  

  Is it possible that a method is listed without running? Suggestions to overcome this is welcome. Thanks in advance

  Kind regards

  S.P.Prasaanth

  According to this http://forums.ni.com/t5/LabVIEW/Remove-Frame-Not-Implemented/m-p/2100644/highlight/true#M684629 post: Yes, it can be.

  But it seems that implemented in LV2013: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Configure-Event-Case-with-Scripting/idc-p/2523818/high...

• Can someone convert my VI please?

  Can someone convert this screw (5.1) to 8.6 please. I would be very grateful if you could.

  thanking you in advance!

  Is attached to 8.2, which you can open in 8.6.

• Convert llb VI LabVIEW 5 for use in LabVIEW 8.6

  Hello world!

  First of all, I would like to say how much I enjoyed working for OR and especially to support the community online in my free time. I have to say that this is a good place for NOR users in long term, the new users and any other LabVIEW - and you guys have fun! Excellent.

  I am now in college and I'm looking to use LabVIEW for robotics work. During my research, I found some manufacturers for material screw: however their "latest" version seems to be in LabVIEW 5.

  Someone would be kind enough to convert my screws at least LabVIEW 6 or up to LabVIEW 8.2.1 (latest version that can open the LabVIEW 5 screws) would be great. My LabVIEW 8.6 should be able to open the screw saved in LabVIEW 6 or higher. (Obviously not LabVIEW 2009!)

  Reference: How to update or restore to a different Version of LabVIEW VI

  Ever thank you in advance (I get bored of the day where I got all versions of LabVIEW - and OR software on my machine!)

  Kind regards
  James Hillman

  Compilation of mass in 7.1

  Felix

• Convert Labview 8.6 Labview 8.5

  Hello

  Could someone please convert these files (skypesdk) in labview 8.6 version to version 8.5? I have test the sdk 1.0 Skype version, he has a great job and need this for my college project 1.0.1...

  Thx a lot for your help.

  Oli

  Some time ago I create a little VI converter to save all the screws of a file to another destination and with a selectable earlier version.

  The same thing, I used to convert your screws, but I implements ctl or other stuff.

  However, joined in the ctl.

  Christian