TPC-2012

Similar Questions

• TPC-2012 cannot read the shared variable

  Hello

  I have a TPC-2012 and can not read variables shared with him. I welcomed the shared on a cRio-controller Variable. On another PC, the variable is read correctly, but not on the tpc-2012. What can I do? No error message is displayed on the TPC-2012 (Windows CE 5). The PTC can not write values in a shared Variable.

  Thank you

  Christian

  What LabVEIW Touch Panel version do you use? I don't know why static variables do not work correctly on your device. TPC-2012 comes with support preinstalled for shared variables, and it would be possible that it has been deleted or corrupted. Here are some steps you can follow:

  Install the Support of shared Variables
  How do we install the Support of Variables shared on the TPC-2012?

• Conexion between TPC 2012 y PC viaethernet

  Muy buen dia a todos.

  In estos momentos estoy tratando programar una HMI TPC 2012, esta previously are tenia UN SCADA el cual automatically programmed to starts al encender el equipo lo estoy tratando hacer ahora're uno nuevo programar el. TODO esto lo estoy mediante doing a project based on el nuevo Module LabVIEW Touch Panel 8.5.1, pero al correr el programa terminado tratar este to connect mediante activesync is y al no tener este series puerto any no Arab su objetivo, por lo than quisiera saber if is can comunicar mediante conexion ethernet y como is haria esto. También como lograria delete the program that runs to?

  Reciban a cordial saludo!

  That Mr. Bungle tal;

  In this post is that una conexion of ActiveSync menciona no esta soportada in el TPC-2012, pero puedes descargar el archivo via FTP o con una application take en el Modulo para touchscreen support.

  Annex United Nations document in el what explica como puedes descargar application con ambos methods.

  http://digital.NI.com/public.nsf/allkb/9912FA05C5A2D04D86257524006D0729?OpenDocument

  I hope the information you sea ayuda.

  Suerte

• TPC-2012 is not booting

  Hello

  I use a TPC-2012 and it is not booting, it's freezes directly without showing any desktop computer.

  I checked the Flash card, and it seems that he has no problem, I find all data inside when connecting using a card reader for my laptop.

  Thank you for your reply Adnan

  Problem solved by reinstalling Windows CE

• Sharing of Variable Timestamp sets TPC-2012

  My code running on a TPC-2012 reads a shared variable that is hosted on a CRio.  The timestamp of the shared variable reading gives me the time of 05:00 even in 1903.

  If I read this same shared variable using software running on a PC vs TPC, I get a timestamp that corresponds to the exact time on the CRio. The CRio therefore publish and update the variable as needed.

  What's up with the PTC?  I'm guessing that the timestamp of reading is not supported on the TPC?  Yes/No?

  Fixed.

  You must read the timestamp AND the actual output variable.  Just read the timestamp will not give you something meaningful.

  I care about the shared Variable data, I just wanted the Richard, he wrote...

• Cannot customize dialog on a TPC-2012

  Hello

  I implement a UI using a PTC 2012 and LabVIEW 8.6.

  I have a message to the user using a two buttons dialog box. I want to customize the buttons because the default values are 'OK' and 'x', but it seems that this option is not supported? (I enclose a simple project to show what I'm trying to do).

  Looks like a trivial feature, and 'OK' and 'x' buttons are really small and close together. Bad choice for an application of the touch panel.

  I have a work around.

  Thank you

  Hello

  Do a separate Subvi to take input from the user, it would make your job a lot easier.

  You will be able to place the buttons wherever you want and you can also customize.

  Concerning

• Tap the Navigation Palette missing in LabVIEW 2009 Panel

  Hello

  I developed an application using LabVIEW 8.6 with the touch panel module and a TPC-2012 (Windows CE). I've now upgraded to LabVIEW 2009 and I'm trying to run my code in a TPC-2512 (XP Embedded), but the 'Touch Panel Navigation Palette' I used previously to be found in the new facility. In my view, there is a new range of "Navigation controls" in 2009, but I would like to avoid having to re - design my app with new controls.

  8.6 navigation controls are no longer supported in LabVIEW 2009 or have I missed something? The TPC is displayed in the Project Explorer and MAX, and I'm able to deploy and run applications on it. But the old vi navigation do not work and as I mentioned before, the palette is not even appear when you try to change the vi on the development computer.

  Any help would be appreciated.

  Thank you

  Hello

  The navigation screw touch panel are not displayed to the top, because you are currently using the TPC-2512. If you take a look in the Help file on the Navigation, it states: 'installed with: Touch Panel Module.» This topic can not match its corresponding palette in LabVIEW depending on your operating system, or the licensed products and the target. "I checked this with both LabVIEW 8.6 and LabVIEW 2009 targets. Due to the different architectures, you get a different set of palette (Windows CE vs XP Embedded).

  -Zach

• Run-Time Windows CE

  Hello

  Is it possible to run 8.6.1 Run Time Engine on Windows CE platform? The reason why I ask is because I am trying to display a table of command, I created in LabVIEW 8.6.1 on a TPC-2012. The remote control publishes a VI running on a cRIO-9012. Is there another way I can see the front of this VI on the TPC-2012?

  Thank you

  Hi Bermea,

  You try to run an executable on your touch screen? You should be able to do so-please refer to this post.

  Gregory C.

• 2012-2016 Macbook vs

  Hi guys n girls.

  I hope you're fresh. I was wondering if I could you advice a few difficulties. I currently run a mid 2012 15 Macbook Pro with plug as follows:

  2.3 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  There always works incredibly well after nearly four years and never gave me any problems, but I use the likes of Adobe Premier, after effects etc for my day-to-day work day and I noticed that she began to struggle when we're trying to work and get a preview in real time of the most important projects and those that use 4 K images.

  On this basis, I tried to upgrade. However, the new MacBook can not be stimulated as much as I thought I would. I'm looking for the specifications below and then the numbers are bigger...

  2.8 GHz Quad - core Intel Core i7, Turbo Boost up to 4.0 GHz

  16 GB 1600 MHz SDRAM DDR3L

  Graphics card Intel Iris Pro + AMD Radeon R9 M370X with 2 GB of GDDR5 memory

  .. .am I really notice that much difference and it would justify the price tag of £2150.

  Thank you very much

  J

  You should notice a significant difference.

  Only you can determine if this lack of insurance will be worth the cost.

• Can a Mac 2012 Pro accepts a HD 5 to?

  I'm considering buying a Player 5 TB Western Digital Black Hard for my Mac Pro, model mid-2012. I wanted to know if anyone has one of these large disks, and if the Mac Pro accepts such a disk size?

  I'm running OS X 10.11.6 on a 3.2 GHz Quad Core Intel Xeon Mac Pro mid-2012.

  Thank you.

  Yes, but you may need to get one of these: https://eshop.macsales.com/item/OWC/MPRODBKTLG6/

  I installed a 6 TB drive in my 2010 Mac Pro using one of these. I don't know if the 5 TB drive would have had a problem with the sled drive standard Apple or not. If you are looking for Mac Pro discussions, you can probably find previous discussions of what changes in big readers cause the standard hardware does not work.

• 2012 iMac Fusion Drive Question

  Hi my iMac 2012 drive merger seems to be failing. I know for a fact that the SSD and HD (1 to) are two separate readers and I can replace the HD only instead of two. I would like to know if the HD is different from saying a Seagete HD I can buy the 3rd party vendor or Apple uses a special drive for the fuser unit, it can be replaced by Apple? Thanks in advance.

  See you soon,.

  Johnson

  Yes, it's different, back in 2009 Apple began using HD who had temporary sensors in HD. More on shelf HD do not have this feature, so install something else that one provided by Apple is potentially a problem due to the possible fans running at full speed and possible overheating. You can use the fan control software, but this comes at a risk too, but a lot do successfully.

  You can contact OWC (www.macsales.com) and they can also help direct you to the good soluton. However, if it was my machine I just consider my local AppleStore or Apple authorized service provider and have a job well done.

• 2012 MacBook Pro 15 card AirPort move to ca?

  The AirPort in my MBP 15 mid-2012 is a failure. It is replaceable by the user? If so, can I put my MBP to an AC AirPort wireless card?

  The WIFI chip is on the motherboard and is not user serviceable or editable.  You might be able to find an external WIFI adapter that supports 802.11ac, but that internal is not extensible.

• I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite.  I have everything backed up on Time Machine. Can you please advise me?

  I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite, support with gratitude by Apple in charge.  I have everything backed up on Time Machine. Are there steps of preparation I need to do before you download and upgrade to Sierra.  Can you please advise me please?

  N ° so you have a backup if something goes wrong you can return to Yosemite.

  Only concern is that some devices, including USB that may require the updated drivers, but these records are not always available

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• MacBook Air (13 inch, mid-2012) autonomy

  Hi all

  I have a question for those who currently own a mid-2012 13 - inch MacBook Air.

  How long does work on a single charge while working with Google Docs on Safari, having several other tabs open and listen to music from Apple? I am interested in real data, not the specifications of the Apple Web site.

  Thanks in advance!

  Anyone?

• Can I use a 4K screen with my iMac "end of 2012?

  My iMac (13.2) is a 27-inch end 2012, 'Core i7', which has a GPU Nvidia GTX 680MX 2048 MB. I'm interested in using a '4K' monitor with it, as the 'Dell Ultra HD 4 K monitor P2415Q

  It's that Apple supports 'officially' in terms of 4 K:

  With the help of 4K and Ultra HD TVs with your Mac - Apple Support screens