Convert resultlist container to a string for report

Similar Questions

• How to convert an xml to a string for a textflow

  Hello

  usually I use string type fields to feed the textFlows.

  now for comfort Visual, I want to store in the file in XML format and the thing was successful, but when I want to use them I have problems, because the XML formatting creates line spacing that I don't want.

  for example:

  " < TextFlow columnCount ="inherit"columnGap ="inherit"columnWidth ="inherit"lineBreak ="toFit"paddingBottom ="4"paddingLeft ="4"paddingRight, paddingTop ="4"="4"paragraphSpaceAfter = '15' paragraphSpaceBefore ="0"verticalAlign ="top"id ="flow"whiteSpaceCollapse ="preserve"xmlns =" http://ns.Adobe.com/TextLayout/2008 ">

  < linkActiveFormat >

  < TextLayoutFormat color = "#cc00cc" fontWeight = "bold" = "underline" textDecoration / >

  < / linkActiveFormat >

  < linkHoverFormat >

  < TextLayoutFormat color = "#cc0000" fontWeight = "bold" = "underline" textDecoration / >

  < / linkHoverFormat >

  < linkNormalFormat >

  < TextLayoutFormat color = "#000099" fontWeight = "bold" = 'none' textDecoration / >

  < / linkNormalFormat >

  < p color = "#990099" fontSize = "15" >

  < span > Gestione dei con translations TLF e Testo classico </span >

  < /p >

  < p color = "#666555" fontFamily = "Arial" fontSize = "14" >

  < span > Novità introdotte con Ultima version di Flash CS5 sono molteplici, una di queste novita if i campi di testo. </span >

  < /p >

  < p color = "#990099" fontSize = "15" >

  c < span > Cosa'e da sapere sul Text Layout Framework (TLF)? </span >

  < img id = "1 |" emot | 0"height ="18"width = source"18"="[object Bitmap]"/ >

  < span > < / span >

  < /p >

  < p color = "#666555" fontFamily = "Arial" fontSize = "14" >

  Che respect al Testo Classico, </span > < span >

  < /p >

  < / TextFlow >

  perform:

  init--------------------------------------------------------------

  Gestione dei con translations TLF e Testo classico

  Novità introdotte con Ultima version di Flash CS5 sono molteplici, una di queste novita if i campi di testo.

  C cosa'e da sapere sul Text Layout Framework (TLF)?

  Che respect al Testo Classico,

  --------------------------------------------------------------------- end

  Instead of:

  init--------------------------------------------------------------

  Gestione dei con translations TLF e Testo classico

  Novità introdotte con Ultima version di Flash CS5 sono molteplici, una di queste novita if i campi di testo.

  C cosa'e da sapere sul Text Layout Framework (TLF)?

  Che respect al Testo Classico,

  --------------------------------------------------------------------- end

  like I want to.
  Now I see that with spark.utils I can use importFromXML to convert to a textFlow with collapse of the line in excess, but unfortunately the spark of class is not visible in Flash/as3.
  Can you help me?
  Thanks in advance
  Jean-Paul

  config = new Configuration();
  format = new TextLayoutFormat (config.textFlowInitialFormat);
  format.whiteSpaceCollapse = "collapse."
  config.textFlowInitialFormat = format;
  collapsingTextLayoutImporter = TextConverter.getImporter)
  TextConverter.TEXT_LAYOUT_FORMAT, config);

  Flex SDK is opensource. Scrap of code above comes from spark.utils.TextFlowUtil.

• convert XML to a random string for text fields

  Hello

  I'm now trying tolearn XML as a way to solve a word game project and I can see why it was suggested as a good direction to go.

  Currently, I sketched this little code just to see how it would work.

  Each text box receives another word is the word game / the other is a hint.

  I was hoping to get a new one appear each time I tested the movie but I can't seem to get it.

  Any suggestions to get me going in the right direction?

  Thank you

  import flash.net.URLLoader;

  import flash.events.Event;

  var allWords:Array;

  var thisWord:String;

  var gameWordsXML:XML;

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);

  xmlLoader.load (new URLRequest ("words.xml"));

  function xmlLoaded(event:Event):void

  {

  gameWordsXML = new XML (event.target.data);

  / * gameWordsXML:String = event.target.data;

  allWords = gameWordsXML.split(","); * /

  gameWordsXML [Math.floor (Math.random () * gameWordsXML.length ())];

  for (var i: int; i < gameWordsXML.length (); i ++)

  {

  text_boxA.text = gameWordsXML.word [i]. @ val.

  text_boxB.text = gameWordsXML.word [i]. @ allusion;

  }

  }

  using

  use

  private function xmlLoaded(event:Event):void
  {
      gameWordsXML = new XML(event.target.data);
  
      var words:XMLList = gameWordsXML.elements("word");
      var randomIndex:int = Math.random() * words.length();
  
      text_boxA.text = gameWordsXML.word[randomIndex].@ val;
      text_boxB.text = gameWordsXML.word[randomIndex].@ hint;
  }
  

  method length() of an XML object always returns 1

  You must get the XMLList of the nodes that you are interested in and then call length() on it

• Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  This is not a formula, but a constant simple schema of a table complex. Wire remains, then do a right click of the terminal of the initializer of the feedback node and select "create constant. That should do it.

• Search for files which file name contains a specific string

  Hello

  I'm lookng for a way to find all the files in a directory, what part of the file name contains a specific string.

  for example:

  String = Hello

  files;

  -1hello2.txt

  -22he45.txt

  -gehello42353.txt...

  The result should be an index or the full file name that matches. In the example, I found the indexes 0, 2, or 1hello2.txt and gehello42353.txt.

  In fact, I have a list of files with the "recursive list.vi".

  Any suggestions are welcome.

  Thank you for your help

  Yves

  You can use the list of folder - function with * Hello *-model.

  From there on, you get the names of files that include this specific model.

  If already you have the list of files:

  -use the chain of digitization of the chips in a loop for and if token index! = - 1, then you can add this index in array to the list.

  I m sure there are better ways to do it, but nothing that I can get to quickly.

• Windows 7 can search for files containing a specific string that includes punctuation

  I have a documentation for a programming language which is in the form of html on my machine and search for files that contain the string "${1}".

  However if I type that in the search box windows instead seeks any file containing the string '1' in its content or its file name or a folder (which gives me 10240 results!)

  Research I try it is possible with a different syntax (escape the $ and brackets to indicate that they are part of the search maybe string)?

  Thank you

  MOG

  Hi Mog,

  Because the question you posted is related to search for files containing a specific string, it would be better suited in the MSDN forum. Please post your question in the following MSDN forum:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

• Are there special permissions (file access) required for reports write to temporary files?

  Report BUILDER 11.1.0.7 (64-bit)
  

  Form builder 11.1.2.1.0 (64-bit)
  

  Windows 7 Pro 64-bit

  Java:

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  IDAutomation LinearBarcode.jar

  
  

  I have a report that prints the data with bar code on the detail rows in a report.  It uses the Java LinearBarcode.jar by Idautomation package for this purpose.  The Java package contains an encoder that returns a bar code in the form of a GIF image to a field on the report.  One of the arguments that it requires is a name of temporary file generated by srw.create_temporary_filename ().  When it works perfectly, and it creates the temporary image file in my folder tree 'House' (C:\Users\ < username > \AppData\Local\Temp) run under the report generator.  When I run this report generator with fast running behind her I can watch the report search, open, read and close this file LinearBarcode.jar several times for successive lines of the report.  Everything seems to be very good in the generator.

  The fun begins when I try to call the same report from a FORM (Form Builder fleeing), where he fails every time, somewhere in the image generation stage.  In my view, that it fails to the creation of the image itself, when he tries to open the file for writing temporary image.  I can find the empty temporary files left after the report runs and fails, but the size of the file is zero byte.  When I run this report of my test form with Microsoft quick run behind it I see the report search, open, read and close this file LinearBarcode.jar for the first line of data in the report, then the report fails.  So, I know that the .jar file and the required REPORTS_CLASSPATH/CLASSPATH entries are synchronized with the location of the .jar file.  The report runs, and he finds the LinearBarcode.jar, it opens, it reads and closes it.  What I do is to not see any activity related to the image itself temporary file.   Thus, failure at least gives the impression of being in the image create step itself, which makes me doubt the safety of Java.  However, there is no message popup on Java security problems.

  I tried implementing Trace for reports, but also, that does not give something of use, except to confirm that the report is certainly a failure in the creation of barcode code somewhere.  This is known from the error message in the log file: fatal error REP-1401 < barcode create procedure name >

  I'm guessing that he might be a missing 'writing' somewhere authorization prevent the creation of the temporary file used to generate the barcode image file. This error only occurs under Java (run from a form). I was not able to find something about it by reading everything I could find on the OracleBarcode.jar demo.  I also not found anything in Google searches that does not count.

  Are special permissions to allow these operations to temporary file as shown above?  If Yes, where and how are they set?  If this isn't the case, else anyone seen this issue before?

  Thanks in advance

  Hank

  Resolved: This issue had nothing to do with the creation of barcodes. It turns out that there is a field in the State who had no defined source. It was not rendered because it was hidden by a format trigger. It seems that this case is handled by the constructor, but blew the engine in the reporting process used when a report is called by the forms. It took a long process of elimination, elimination of triggers, fields, parameters, and even the generation of bar code code until I found it.

  Thank you

  Hank

• How to convert dashboard invites you in guests from report

  Hi friends,

  We have number of dashboard pages in my web catalog and each page with a report and a dashboard dashboard invite, with the same name. And there is not any such reports and dashboard guests. Now, we want to convert all my dashboard invites you in the guests of reports.

  My client application, without the need to keep the two sections in the dashboard is to say, one for report and other is for quick dashboard when we publish the dashboard. We currently guests of dashboard in the dashboard and filters, conditions in the criteria tab. But my client want to move all the stuff under the report encourages (criteria/results/guests/advanced). No need to maintain the filters on the criteria tab.

  Please suggest me how to move the dashboard invites you in guests of reports in one fell swoop.

  They won't create manually under report guests.

  Your help is very much appreciated here. Thanks in advance.

  Kind regards

  Raghu Jen7782

  I don't think they did something other than manual. Prompt and report being 2 different objects, how can be merge these 2 and more prompt columns much not be present in the report.

• Array of strings for DNS in workflow Clone VM

  The VM Clone with single NIC workflow requires an array of strings as a parameter inut DNS servers. I'm not sure how to pass an array to this parameter. In c#, I have:

  String [] dnsArray = {"10.130.132.109", "10.130.132.108"};

  dns1Attribute.name = pmArray [18] .name;

  dns1Attribute.type = pmArray [18] game;

  dns1Attribute.value = dnsArray;

  attributeArray [18] = dns1Attribute;

  However, c# generates an error 'cannot implicitly convert type() Sting in string' for line 4. I tried passing a single string as attribute value, but it doesn't seem to work either - no value is entered in the workflow when it is running.

  Anyone have any ideas on that. An example of Java would be nice too - I am flexible.

  Thank you!

  Hi geno5150,

  here how to create a table to pass:

  var monTableau = new Array();

  MyArray.push ("10,20,30,40");

  MyArray.push ("192.168.100.254");

  For this move as an attribute:

  var AttrArray = newArray();

  var Attr = new Attribute();

  Attr.Name = '< ParameterName > '.

  Attr.Value = myArray;

  Attr.Type = "Array";

  AttrArray.push (Attr);

  push the other attributes & run the workflow

  That's all

  -

• convert the column to a string name

  pls help me.
  
  I need to know how can I convert the column to a string name because I can not insert the column name into my table.
  
  
  for matrix (SELECT nom_de_colonne
  OF all_col_comments@myDBLink
  WHERE UPPER (trim (table_name)) = "ROLEMATRIX")
  loop
  INSERT INTO myTABLE (myColumn)
  VALUES (matrix.column_name);
  end loop;
  
  
  my error:
  ORA-00984: column not allowed here

  which line you are confronted with error, because I've also tested this, his work on my side!

• Concatenate an integer to a string for?

  Hello

  I'm new to LabVIEW.

  For my internship, I GPIB hardware control and to take certain measures.

  I use the GPIB write VI which accepts a string for its data entry.

  The command I want to send is of the form: "apply 5, 1".

  I thought to concatenate a string ('Apply_"), an integer ('5'), a coma and space (" ", _") and the last integer ('1'), so that I can increment integers in a loop if necessary.

  However, the VI of string concatenate does not accept the whole entries.

  Also, I think I'm going hard on this topic (I thought adding integers as strings, but then I won't be able to increment them at each iteration).

  Can someone help me?

  Thank you very much

  Nicolas

  You can use the Format function in the chain.

  Ben64

  

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Y at - it an easy way to change 323 (string) for "43 01" (hex string) or 3249 (string) to "0C B1" (hexadecimal string)?

  Y at - it an easy way to change 323 (string) for "43 01" (hex string) or 3249 (string) to "0C B1" (hexadecimal string)?

  Thank you.

  Like this?

  

  It depends on type of exactly what you want in the end.  Do you want a channel which shows the 4 characters who are the hexadecimal number for the number you enter.  Or do you want a channel which has only 2 (1 for each byte) characters, but the indicator is formatted to display those hexadecimal display?

• all VI to convert a number to a string?

  Hello

  Have we not all VI to convert a number to a string?

  See you soon,.

  Forrest

  Hello.. Have you tried ' string/number conversion'...? You can find that to do a right-click on the block diagram-string/number of all the function - string - conversion...

  Just a thought... It could be that useful...

• How do I do to convert the text of the String object to the Clipboard.

  Hi all, I am a beginner and I have a problem with the method of the Clipboard. I want to put a text string to the Clipboard, but the Clipboard.put method requires an object. What can I do to convert my text from the string object?

  My code below:

  String message = OriginalMessage.getBodyText();
  
                  String[] selections = {"Copy","Cancel"};                            Dialog addDialog = new Dialog("Copy to Clipboard", selections, null, 0, null);                           LabelField field = new LabelField(message);                addDialog.add(field);    
  
              if(addDialog.doModal() == 0) // User selected "Copy".            {
  
                  Clipboard cb = new Clipboard.put(message);
  
              }
  

  Please help me.

  A string is an object in Java.  You can simply call Clipboard.getClipBoard () .put (message);