Similar Questions

• How to convert a number to a 10-bit array that will go in an external DAC (AD7533)

  Hello

  This here is my situation.  I'm using with LABVIEW to program a CPU in the following way:

  1 Laview calculates the values of a sine wave, according to the number of loop iteration. (i.e. generating a value of the sine at different frequencies).

  2. it is adjusted between-/ + 1.

  3. I connect an array of digital output ports to an external, independent, four quadrants, 10 - bit DAC. The part is AD7533, and I hope I can use it in bipolar configuration.

  My question is, how do I convert the number of sine wave (or triangal, sqr, etc.) in a table of values of T/F can I stream through my DAC and output a sine wave signal?

  I tried number Boolean array with the calculated value of sinus, but do not give me any bits of hard.

  All suggestions greatly apprec.

  RTom

  Post what you have done so far.  Are starting you with a a U16 or I16 whole bit (or more)?  How do you do the scaling between +/-1 and an integer.  It should be just a matter of using the table number of Boolean and then using a subset of the table to reduce up to 10 items boolean.  If you are starting with an integer I16, it may be a matter of taking the element of corresponding table of the sign bit and the 9 elements that correspond to the less significant bits, to put together to make an array of 10 elements.

• I have seconds in digital format, I need to convert this number to format MI: SS

  Hi all

  I have seconds in digital format, I need to convert this number to format MI: SS

  ex SEC 119-> 01:59 you guys can help me?

  s 900-> 15:00

  can you help me?

  Thank you all.

  Hello

  Here's one way:

  SELECT TO_CHAR (TO_DATE (119 ' SSSSS'), 'MI: SS') FROM DUAL;

  SQL > SELECT TO_CHAR (TO_DATE (119 ' SSSSS'), 'MI: SS') FROM DUAL;

  TO_CHAR (TO_DATE(119,'SSSSS'),')

  ------------------------------

  01:59

  SQL >

• How can I download and reinstall Adobe Photoshop elements 11?  I have a new iMac and all other software converted except Photoshop...

  I bought a new iMac Retna display and converted on my other software from my old iMac.  Most of all applications properly converted, however Adobe Photoshop elements 11 has just launched with an error indicating that we need to reinstall the application.  We have the original serial number but can't find a copy of 11 items on the Adobe site to download and reinstall.  Also, we don't find any contact information for same Adobe support if the messages in the forum of State we need to contact adobe customer service to resolve this problem.

  Please advise...

  Thank you

  Try this link:

  Products download Photoshop Elements | 10, 11, 12, 13>

• The value "cannot be converted to number.

  A that someone has encountered this error?  I'm if you divide two values to get a percentage.  This works except at one point, I get this error:

  The value "cannot be converted to number.

  IsNumeric() to check that all the variables that contain numbers.

• How to convert the number to SQL?

  How can I convert the number in SQL?
  The problem is that I use .NET and the Oraclenumber seems to be too big.
  
  Number of database - what I get when I select
  -----------'12'--------------------------------------'12'
  -12, 1-12, 10' <-this 0 should not be there
  -----------'12,12'-----------------------------------'12,12'
  -12, 123'---12, 1230' <-this 0 should not be there
  -----------'12,1234'-------------------------------- '12,1234'
  
  
  I don't know why this happens?
  
  Now, I tried to select with to_char (COLUMN1), but when I have values like "' 0,15 ' in the base, I get in select ', 15' when I convert with to_char?"
  
  Anyone know a solution?
  
  Kind regards
  Simon
  
  Edited by: user3654758 the 30.09.2010 02:02

  with mytable as
  (select 12 n of all the double union)
  Select 12.1 in union double all the
  Select 12.12 in union double all the
  Select 12.123 in all the double union
  Select double 12.1234)
  Select case when trunc (n) = n then
  TO_CHAR (n, 'FM9999999999999999999')
  on the other
  TO_CHAR (n, 'FM9999999999999999999D9999999')
  end
  FROM MyTable;

  Edited by: hartmutm the 30.09.2010 02:21

  I changed it a bit, because you have a problem with the separator decimal escape in the previous code.

• How to convert the number in time

  Hai All
  
  How to convert number of datetime function
  
  I have number 0825 in a table t1 and another table, I have a column of type date
  
  How can I subtract
  
  0825 respondent
  
  Concerning
  
  Srikkanth.M
  
  Published by: Srikkanth.M on April 3, 2010 01:18

  Try

  SELECT (
           INTIME
           -
               TO_DATE(TO_CHAR(Intime,'DD-MON-YYYY')||' '||
               TO_CHAR(0825,'0000'),'DD-MON-YYYY HH24:MI')
          ) * 24*60 time_diff
  FROM   T1;
  

  * 009 *.

• have the icon to download helper with video up, I have until it clicks, dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  I was able to load videos 26 then he stopped down. I checked the preferences, the version is 4.9.24, I can see that the video is listed next to the icon, when I drag the mouse over it.

  I support download icon, when the video is running. I click next to the icon and choose the game I want, on fast download I see it loads, but no dwhelper. dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  There is a problem with DownloadHelper Firefox 36. They are working on a new version, you can download and help test this discussion page:

  https://groups.Google.com/Forum/#! Forum/video-video downloadhelper-5

• Convert the number to a HEXADECIMAL 4-digit string

  Hello

  I would like to know if it is possible to convert a number to a HEXADECIMAL string 4 digit.

  Now I convert the number to a table with ' generation array "and this table that I convert it with an"array of bytes to a string.

  While when I type in the number 30, the channel will show 1E (HEX, 2 digits).

  But when I type a number greater than 255, it continues to show FF (255)

  If I do the 'picture to build' bigger and add an element, the string indicates a 4 digit Hex number.

  Now, I would like to know how I can show one number, greater than 255 in the chain with 4 digits.

  So I actually need to divide the number in 2 tables before building the table, isn't it?

  I hope that you understand my purpose?

  So when I type in "1235", I want a string indicating "04E5" and not "FF".

  The function that you want to use is number to a hexadecimal string. Set the width of 4

  

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/number_to_hex_string/

  Moreover, 0x04E5 is decimal 1 253

• convert hex number to binary number table

  Hello

  I need to convert hexadecimal number in binary number table.

  Can someone show me how?

  For example,.

  NUM1 = 0xFA

  I need to put in binary table,

  0 1 2 3 4 5 6 7 index

  value (LSB) 0 1 0 1 1 1 1 1 (MSB)

  Thank you.

  Guru,

  You generate a string instead of a number array array as the op asked and your table is backwards.

  What srikrishnaNF and smercurio_fc are descibing is this simple code.

  

• Maximum value such as a number or a string

  Hallo,

  I calculated the maximum value of a channel. The next step is to use this value for further computation. My problem is that I can't use this value as a number. It is just a string. I tried with

  ChnPropGet then I got the number. But I can't use it for calculations. Anyone have an idea how I can fix this problem?

  I've attached a screenshot of my script. I use the German version of 12 DIAdem.

  Thanks for the help...

  Hello LePot,

  the properties. The function returns the property in its native type. If you navigate to the maximum property of a channel, it will return the value as a floating point number. You can check this by running the following script:

  (The script assumes that the dataset example is which has a number of Group 3 with a channel named "Res_Schall_1". But your chains should give you the same result with the message box showing "double."

  Dim Maximum
  Maximum = Data.Root.ChannelGroups (3). Channels ("Res_Schall_1"). Properties ('minimum'). Value
  MsgBox (TypeName (Maximum))

  If you ever want to convert a number represented as a string, be careful when you use "CDbl". This VBScript function assumes that the number is formatted by using the language of oyur BONES, especially the decimal setting (in '. 'or', '). If the setting of the operating system does not match the way the number is converted to a string, you have a problem. That's why the offer DIAdem::Str() to go a certain number to string s and Val() to go the opposite direction. Using CDbl can create rellay average errors that are difficult to detect.

  Andreas

• Convert resultlist container to a string for report

  Hi all

  Is there a way to convert a resultlist containing a string? I have a ResultList of a separate test that I need to add to the ModifyBatchReportHeader point of the string for my report in ASCII format.

  I tried adding "str (OtherTestResults)", but it adds just periods as if he doesn't know how to access the test data (name test, measure, etc.). Is there a a way to convert it containing a string the TestStand way automagically done at other times?

  Thank you

  Chris

  Hi Chris,

  Unless you said, I did not realize the batch mode.

  For my example, I used the ModifyBatchReportFooter. You can also use the header.

  You just have to play with the HTML tags.

  This example only works with HTML-reports!

  For the generation, it uses the sequence: PutResultsInReport reportgen_html.seq in the template folder - OR

  Hope this helps a little more

  Jürgen

• Fract/Exp Numbe display Format string

  I have a digital channel that has a decimal value with accuracy up to 16-digit figures. I want to convert this string to a numeric value, and I used a "Fract/Exp number necklace. In my VI I hae set:

  Data type: EXT (because it allows number of decimal digits of 15 to 20)
  Data format: covered Point
  Numbers: 16
  Precision Type: Digits of precision

  Here's my question: If the input string is composed of digits of precision = 15 Eg: 5.369607712106161
  Then I output = 5.3696077121061609, which is the same, but not the same number I sent.
  or 1.145152879691825 String gives me the number = 1.1451528796918251
  String 5.818356760119754 gives me the number = 5.8183567601197543

  Please suggest how I can make more specific output.

  Thank you.

  Kind regards

  H.

  Wire a constant to the default value with the entry of your string to the function of numbers and define the type of POSITION, it is default DBL (note the red dot on your meter).

• How do I do to convert the text of the String object to the Clipboard.

  Hi all, I am a beginner and I have a problem with the method of the Clipboard. I want to put a text string to the Clipboard, but the Clipboard.put method requires an object. What can I do to convert my text from the string object?

  My code below:

  String message = OriginalMessage.getBodyText();
  
                  String[] selections = {"Copy","Cancel"};                            Dialog addDialog = new Dialog("Copy to Clipboard", selections, null, 0, null);                           LabelField field = new LabelField(message);                addDialog.add(field);    
  
              if(addDialog.doModal() == 0) // User selected "Copy".            {
  
                  Clipboard cb = new Clipboard.put(message);
  
              }
  

  Please help me.

  A string is an object in Java.  You can simply call Clipboard.getClipBoard () .put (message);

• Retrieves a number to a string

  Hi all

  I want to extract a number from a string.

  Please tell me how to get there.

  the values are

  A1

  A2

  A3

  A4

  A5

  A6

  A7

  A8

  A9

  A10

  A11

  I want to retrieve only the figure.

  Thanks in advance.

  Like this perhaps?

  SQL > select to_number (regexp_substr ('a10','[[: digit:]] + "")) twice;

  TO_NUMBER (REGEXP_SUBSTR ('A10','[[: DIGIT:]] + ""))
  ----------------------------------------------
  10

  If this isn't what you want, please explain with some more detail as it is explained in the FAQ: Re: 2. How can I ask a question on the forums?