Convert the database to 10 v to v11

Similar Questions

• Convert the database and parallelism

  Im trying to convert from linux to windows database database. Two of them has a little endian.
  
  I run the following script in rman and run OK. RMAN is configured to use a parallel process 1 (CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE)
  convert the database new database 'dbsfil '.
  carry the script ' / u05/oracle/dbsfil/transport.sql'
  «Microsoft Windows IA (32-bit)» platform
  format ' / u05/oracle/dbsfil/%U';
  
  But when I change the property of parallelism Rman to N, it will fail! The error is:
  
  *******************************
  To change the internal database identifier, use the DBNEWID utility
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2009-07-13 10:43:11
  ORA-19927: CONVERSION of DATABASE Operation cannot continue
  *******************************
  
  The version of linux database is:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  Think you hit a bug 5016125.

  Check metalink Note: ORA-19927 reception when tempting RMAN convert database - 424781.1

• Convert the database

  Could someone please tell me what I'm doing wrong? I am migrating the database company Multisim 9 to 10 Multisim.

  In the menu of multisim 10, I went to tools-> database-> converting a database. I selected the source database (from multisim 9) and click on start.

  The conversion went pretty fast and I closed the screen, but when I tried to merge the converted database, multisim gives the error: "not a valid password.

  I performed the operation on the database of the user and got the same error as well.

  Any ideas?

  Operating system is Windows Vista SP2, Multisim Power Pro v 9.0.155 and Mutisim Power Pro v 10.1

  I found what the problem was! It was the freaking access control user (UAC) in windows VISTA that was responsible for my headaches

  When I ran multisim 9 as administrator (click right on the multisim icon and choose "run as Administrator"), I saw 5 components just as you did, but when I ran without administrator privileges, I saw all the components of 1411

  So, I ran multisim 9 without privileges to administrator and exported all the components in a temporary directory. I then reopened multisim with administrator privileges and re-import back to my database components. After that, I was able to use the database to convert in multisim 10 to import all the components.

  Garret, I can't thank you enough for the assistance provided. Thank you very much.

• Convert the database to use OMF

  Hi, im trying to convert my database to use BCI I the value of the parameter db_create_file_dest = ' / u01/oradata/database ' (spfile)
  and after that I have set up the database and submit the command rename:
  
  SQL > /u01/oradata/DATABASE/system01.dbf mv O1_MF_ora_00000001_ host. DBF;
  
  But the file is going to ' / home/oracle.
  
  
  What I've done wrong?
  
  Thank you!
  
  Published by: Carlos LF on April 14, 2010 07:13

  Carlos LF says:
  SQL >host mv /u01/oradata/DATABASE/system01.dbf O1_MF_ora_00000001_. DBF;

  But the file is going to ' / home/oracle.

  What I've done wrong?

  When you say host mv... it runs the command move OS...

  Have you checked your working directory current "pwd" when you have started SQL * more? You move the file/u01/oradata/DATABASE/in?

• Guyz I need to convert the database from ms access to oracle 10g

  Hello everyone... I wanan convert my access database to oracle 10g. As I create a form like OVERVIEW MONTHLY after the transfer to oracle 10 g... I wud really cud happy if a few b help me in this matter...
  I'm ready to send database... access to u people can check it out and get back to me with a useful solution!

  Hello

  Oracle SQL Developer migration

  Oracle SQL Developer integrates migration support, offering users the opportunity to migrate objects from database and data from MySQL, Microsoft Access and Microsoft SQL Server, Sybase to Oracle. This document details the installation steps to help prepare your environment for migration of database and provides a brief description of each of the 5 main steps of a migration.

  http://www.Oracle.com/technology/tech/Migration/Workbench/files/omwb_getstarted.html

  Concerning

• convert the single RAC instance

  What measures are necessary in order to convert the database unique instance to the CARS?
  
  
  Thank you to
  
  Published by: user11977218 on February 26, 2013 17:00

  To convert single DB instance to several failure (RAC set up)
       
  1 met the full backup of the source DB system
  2. install the binary oracle clusterware binary on target m/c
  3 Add the cluster environment settings to m/c source pfile

  *.cluster_database = TRUE
  *.cluster_database_instances = 2
  * .undo_management = AUTO
  .undo_tablespace = undotbs (undo tablespace which already exists)
  .instance_name = RAC1
  .instance_number = 1
  .thread = 1
  . LOCAL_LISTENER = LISTENER_RAC1

  4 open the node 1 m/c (source m/c)
  5 'run $ORACLE_HOME/rdbms/admin/catclust.sql to create '.
  cluster database from the points of view within the existing instance.
  "
  6 "recreate the control file if you set maxinstances to 1 when creating
  the single database. »
  7 "add specific in theinit .ora for the second instance parameters
  instance on the second node and set the appropriate values for it:
  The names may need to be changed
  .instance_name = RAC2
  .instance_number = 2
  . LOCAL_LISTENER = LISTENER_RAC2
  .thread = 2
  .undo_tablespace = UNDOTBS2
  .cluster_database = TRUE
  .cluster_database_instances = 2
  ==> where LISTENER_RAC2 is an entry in the file tnsnames.ora as:
  LISTENER_RAC2 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ) (PORT = 1521))"
  8 mount the database (from 1st instance)
  9 ' edit the database
  Add logfile thread 2
  Group 3 ('/ dev/RAC/redo2_01_100.dbf') size in the 100M.
  Group 4 ('/ dev/RAC/redo2_02_100.dbf') size 100 M; »
  10 change a public wire turn on database 2;
  11 create an Undo Tablespace second from the existing instance
  'CREATE THE UNDO TABLESPACE UNDOTBS2 DATAFILE '.
  ' / dev/RAC/undotbs_02_210.dbf' SIZE 200 M;
  "
  12 set ORACLE_SID variable ORACLE_HOME environment and on the second node.
  13 start the Second Instance.
  startup

  *****************************************
  Best regards
  Shishir Tekade.
  My Blog: http://shishirtekade.blogspot.com

• Migrate the database

  Hi all
  
  Want to migrate and upgrade a database (size = 150G) Oracle 10.2.0.1 on RHEL 5 (32-Bit) for Oracle 11.2.0.3 on RHEL 5.6(64-Bit) on a new server.
  
  The source and target are IBM servers.
  
  Since a production system, downtime has therefore kept to a minimum of 3 hours. The network is slow with a line of 2 Mbps (shared).
  
  What should be the method?

  Hello

  RMAN converts the database command.

  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191/dbxptrn.htm#CHDEICED

  Please consult Re: migration of databases

  Concerning
  Hitgon

• Expdp/impdp can be used to upgrade the database (instead of DBUA) R12

  Hi all
  
  (1) could as possible to convert the database to UTF8 value as part of the database
  upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?
  
  (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
  with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
  Can I use expdp/impdp instead so I can convert the character at a time? All documentation
  that I can follow to use expdp/impdp to do the upgrade?
  
  (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
  the value UTF8?
  
  Thanks in advance!

  (1) could as possible to convert the database to UTF8 value as part of the database
  upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?

  I do not. You must upgrade, and then convert the characters or convert then upgrade - you can save an SR to confirm this with the support of the Oracle.

  (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
  with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
  Can I use expdp/impdp instead so I can convert the character at a time? All documentation
  that I can follow to use expdp/impdp to do the upgrade?

  Only DBUA is the way supported in Oracle EBS instance level. Please see this similar thread - Oracle EBS 11i Database Upgrade to 11 GR 2 - Upgrade method Support Manual is?

  (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
  the value UTF8?

  Please see the documentation referenced in this thread - ADADMIN convert character set CUSTOM_TOP

  Thank you
  Hussein

• Migrate the database from standard edition to enterprise edition.

  Hello
  
  We use oracle 10.2.0.4 on AIX 5.3.
  
  We lack some databases on the standard edition, now we need to migrate these databases to enterprise edition,
  
  What are the steps to do it?
  
  
  Thank you.

  Salvation;

  Please find below the doc:
  How to convert the database from Standard to Enterprise Edition? [117048.1 ID]

  Respect of
  HELIOS

• How to convert Date months in the database that points to the EBS, DWH not.

  Hi friends,
  
  We intend to create reports in OBIEE and the Source is EBS. This means that we do not want depends on Datawarehouse and Informatica and OBIApps. Simply create us some reports and that they refer to the EBS database.
  
  End of test, we took an HR report and it contains under columns:
  
  Months (Sun)
  Revenue by Division (Fact)
  Average cost per numbers of workforce (Fact)
  
  In my little survey, we found that the income column is of EBS: GL_BALANCES. And we have configured the base of W_Day_D table in DAC has no column months in EBS (not sure).
  
  Come to my problem, how can I call the month column in my data base stressed EBS. How to convert the Date months in my database.
  
  I can deceive me, but someone please look into this... How can I create columns for this exact report of OBI in EBS database instead of DwH.
  
  Thanks in advance...
  
  Raghu Jen7782

  Just confused here.

  Hang on, if I get it, you want to create report based on columns of EBS directly then using rt BI applications?

  There is then no question of using the W_DAY_D table then.

  Follow

  As long as you have Date column, you can use DB functions to convert them into months (just use the string SUBSTR to extract the month and the year).
  Create your own query instead of using the tables of BI APPS and try to bring a hybrid product.

  Sorry I'm wrong in the understanding of your needs, if I had properly then do the steps above.

  Mark correct or useful if this can help,

  Kind regards
  Rayan Vieira

• How to convert a name stored in the database as "ABC DEF GHI", "ABC Def Ghi"?

  Hello
  In a column of a table, a name is stored as 'ABC DEF GHI'.
  Now, I want to convert as "Abc Def Ghi".
  It is not necessary that all names have two space . Maybe it's a or n number of places in a chain.
  Could you please tell me how can I do?
  
  concerning
  
  Published by: user576726 on March 23, 2010 23:26

  For this type of conversion in oracle gave the name of function of INITIAL CAPITAL (INITCAP).
  And if you want to update in the database use the statement below.

  UPDATE TABLE_NAME
  SET COL_NAME = INITCAP (COLUMN_NAME)
  WHRE UR_CONDITION;

  -Clément

• Download csv file into the database using apex

  Hi all
  
  I use apex 4 and express oracle 10g, I need to upload the .csv file in the database for one of my queries, I just discussion forum for solutions, I found too, but some how its does not work for me.
  
  below mentioned is error and the code
  
  
  ERROR:
  
  ORA-06550: line 38, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 38, column 8: PL/SQL: statement ignored ORA-06550: line 39, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 39, column 8: PL/SQL: statement ignored ORA-06550: line 40, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550 : line 40, column 8: PL/SQL: statement ignored ORA-06550: line 41, column 8: PLS-00221: 'V_DATA_ARRAY' is not a proc
  Error
  Ok
  
  
  CODE:
  DECLARE
  v_blob_data BLOB;
  v_blob_len NUMBER;
  V_POSITION NUMBER;
  v_raw_chunk RAW (10000);
  v_char char (1);
  number of c_chunk_len: = 1;
  v_line VARCHAR2 (32767): = NULL;
  v_data_array wwv_flow_global.vc_arr2;
  BEGIN
  -Read data from wwv_flow_files
  Select blob_content from v_blob_data
  of wwv_flow_files where filename = "DDNEW.csv";
  
  v_blob_len: = dbms_lob.getlength (v_blob_data);
  V_POSITION: = 1;
  
  -Read and convert binary to a char
  WHILE (v_position < = v_blob_len) LOOP
  v_raw_chunk: = dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
  v_char: = chr (hex_to_decimal (rawtohex (v_raw_chunk)));
  v_line: = v_line | v_char;
  V_POSITION: = v_position + c_chunk_len;
  -When a whole line is retrieved
  IF v_char = Chr (10) THEN
  -Convert comma to: use of wwv_flow_utilities
  v_line: = REPLACE (v_line, ', ' :'); ")
  -Converting each column separated by: in the data table
  v_data_array: = wwv_flow_utilities.string_to_table (v_line);
  -Insert data into the target table
  EXECUTE IMMEDIATE ' insert into TABLE_X (v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11)
  "values (: 1,: 2,: 3: 4:5:6,: 7,: 8,: 9,: 10:11).
  USING
  v_data_array (1),
  v_data_array (2),
  v_data_array (3),
  v_data_array (4);
  v_data_array (5);
  v_data_array (6).
  v_data_array (7);
  v_data_array (8);
  v_data_array (9);
  v_data_array (10);
  v_data_array (11);
  
  -Remove
  v_line: = NULL;
  END IF;
  END LOOP;
  END;
  
  
  
  what I understand of it's system does not identify v_data_array as table for some reasons, please help me.
  
  
  
  initially the system was in error for hex_to_decimal, but I managed to get this feature on the discussion forum, and now it seems to be ok. but v_data_array problem is still there.
  
  
  
  Thanks in advance
  
  concerning
  
  Uday

  Hello

  Correct errors in your sample, I have

  Problem 1

  select blob_content into v_blob_data
  from wwv_flow_files where filename = 'DDNEW.csv'; 
  

  TO

  select blob_content into v_blob_data
  from wwv_flow_files where name = :P1_FILE;
  

  Problem 2

  EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
  values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
  USING
  v_data_array(1),
  v_data_array(2),
  v_data_array(3),
  v_data_array(4);
  v_data_array(5);
  v_data_array(6);
  v_data_array(7);
  v_data_array(8);
  v_data_array(9);
  v_data_array(10);
  v_data_array(11);  
  

  TO

  EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
  values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
  USING
  v_data_array(1),
  v_data_array(2),
  v_data_array(3),
  v_data_array(4),
  v_data_array(5),
  v_data_array(6),
  v_data_array(7),
  v_data_array(8),
  v_data_array(9),
  v_data_array(10),
  v_data_array(11);  
  

  And I have created table missing

  CREATE TABLE TABLE_X
    (
      v1  VARCHAR2(255),
      v2  VARCHAR2(255),
      v3  VARCHAR2(255),
      v4  VARCHAR2(255),
      v5  VARCHAR2(255),
      v6  VARCHAR2(255),
      v7  VARCHAR2(255),
      v8  VARCHAR2(255),
      v9  VARCHAR2(255),
      v10 VARCHAR2(255),
      v11 VARCHAR2(255)
    );
  

  Kind regards
  Jari

  Published by: jarola November 19, 2010 15:03

• DDF mount data to the database

  Dear:

  I need to design an application to read the data of the DDF file and mount them in database.

  Could you please let me know how I can design an application to read these DDF files.

  I offered to do the next step:

  1 binary reading the orginal DDF file

  2 convert to ASCII code

  3. Finally, following the DASYLab format to enter data and transfer to the database file.

  Thank you

  There are two ways to do this:

  First of all, just read the data using the DATA module to READ and write again with a DATA WRITE module configured to ASCII. Please see the ASCII options to ensure that the data separator, date/time format and the number of decimal places to your needs.

  Make sure that you configure the DATA module to READ to read NOT in real time. The default is to replay in real-time.

  Second, read the data using the DATA READING module and use the module output of ODBC and an Action to write directly to the database module. This implies relatively slow data and cannot be done at high speed.

• Error 2147024882 in the database

  Good afternoon.

  I try through OR DIAdem 2011 analyze vibration signals, the problems is that the database is in Microsoft Access and all the data were inserted as a string. I therefore did a VI that convert all data to a numeric value and generates a file of PDM DIAdem.

  

  This VI works perfectly with small databases, the major problem is that the files that I need to analyze are 500 MB to 700 MB and when I insert the database DB tools select data VI gives me error 2147024882, I'm guessing that locks the size of the files.

  So anyway is to insert all these data without fracture of my database?

  Thanks and regards.

  Thanks for the help, but I managed to solve the problem through tiara, create a digital channel and by copying bites generated in this new channel and DIAdema automatically converted to digital data.

• Question about real store type value in the database on Z10

  Hi all

  I'm trying to store a value in the database (datatype is defined as REAL), but the result on Simulator and Z10 is totally different, the two of them, the SDK version is the same (10.0.10.672)

  on the simulation, the value in the database is correct, like this

  

  Z10, the valve can become bad like this.

  

  Define a type of incorrect data or someone has an idea?

  Thank you.

  I think I have sloved... the problem before you record a double or real value in the database, convert QString

  fenceValue["latitude1"] = QString::number(m_FenceFromJson->m_PointFs.at(0).x(), 'f', 6);