Convert to DNG grey AGAIN

Similar Questions

• AWR convert to DNG in lightroom cc

  Today, I installed the latest update. I'm on a Mac.

  I always imported my files and raw files. My Sony AWR files convert to DNG after the last update and I can't seem to import as AWR without conversion.

  My files from my previous import are AWR. Import of today are all dng.

  Y at - it a setting I can change to keep my raw files?

  Thank you!

  No doubt inadvertently selected "Copy as DNG" in the upper panel of the import dialog options. You have not really lost any ability to edit by converting to DNG. But if you don't like it, then just change the option 'Copy' and the conversion will not occur.

• How can I import jpeg images and convert to dng in my lightroom 5.7?

  I need to convert jpeg images to DNG for some controls. I am unable to do it in the clouds, but I can't in 5.7 on another computer.  Help?  Is it just a matter of adjustment?

  Yes, as suggested by Hal, import images into Lightroom, and then convert them to DNG from the library Module.

  Select image > click library in the Menu bar > Photo to convert to DNG.

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• Convert to DNG out graeyed

  My "convert to DNG" on Photo Downloader is grayed out on Bridge CS6, and I don't know how to solve this problem. Someone at - it solutions?

  Please follow the article: Bridge help | Convert to DNG option disabled in Adobe Photo Downloader | Mac OS

  It should help.

• Where is the option "Convert to DNG" in Lightroom 2015.3 Import Module?

  Maybe I'm not, but where the option "Convert to DNG" in Lightroom 2015.3 Import Module?

  Upstairs in the Center above the image preview screen.

  

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• Degradation of the image by converting to DNG files?

  My camera generates NEF files. I usually copy as DNG when I import them into Lightroom. This process does change my image somehow?

  I love that DNG is an open format, but I don't want to degrade my images.

  Thank you

  Daniel

  If you choose lossless compression when you convert to DNG format, not a single pixel has changed in your image.

  Of course, if you choose lossy compression, then the image has changed, although in almost all cases, you'll have a hard time, except if you look really hard seeing her.

• Convert to DNG does not work with 5 d mark III bridge

  I use CS6 and the "convert to DNG" option does not work when I download my Canon 5 d Mark III files, but it works with my 5 d Mark II files. " HOW can I get it works. I had to convert using the DNG Converter.

  8.7.1 ACR update and you won't have to convert to DNG at all. 8.7.1 DNG converter also supports the Mark 3.

• BUG? "Convert to DNG" is not to skip current DNG but rather DNG conversion to DNG.

  I selected 50 k images to convert to DNG, NEF format. After the conversion of the DNG format, I chose it to remove the NAVE. Between the NAVE in the archive are DNG that were previously converted by LR during the import. QUESTION: I see the DNG files in the trash (mac 10.9.3) sense LR isn't jump the current DNG files, but actually convert the DNG format a new DNG then trash the original DNG. This must be a bug.

  https://DL.dropboxusercontent.com/u/37390809/DNG-to-DNG.mov [35MB] (action - select DNG, "convert to DNG", DNG is made and original thrown in the garbage)

  OK - it makes sense that LR converting a DNG for a new DNG if it is

  (1) go lossless lossy

  (2) if the embedded JPG preview changes (xmp changes require the update of JPG JPG or incorporate the size has changed)

  Hope that Adobe considers drugues the spec or conversion when "convert RAW files" is selected using the specification to check the flags that notes what state is the current DNG and compare with the given command so that DNG-> DNG would SKIP over files that are already at the exit of the target.

  My current solution is to filter all simply my library for 'file type' = Raw and then apply the DNG conversion for this file type to jump all DNG files in my archive of shooting 200 000.

• Convert to DNG format not available in bridge photo downloader?

  All of a sudden when I try to download my Nikon D5100 RAW photos, "Convert to DNG" is gray and will not let me select it from the Photo Downloader. I'll have to use an external converter instead. Enforcement Camera Raw is also upward - do not let me open the images with command-R, recording not of the image of 5 star ratings, etc. Any ideas on how to solve these problems? I'm guessing they are related...

  You have Bridge CS6 with Camera Raw 8.4 on Mac?
  Camera Raw 8.4 | No metadata or edit Camera Raw

• Convert to DNG grayed out

  In Bridge CS6 Bridge version is 5.0.2.4, when I use the option in menu file / "get of the camera... Photos. "the box in the"Convert to DNG"is grayed out.  Hovering over the gray text show a ToolTip indicating "DNG COnverter missinr or corrupted.  I think this happens when start the creative cloud of Adobe updated the software on my Mac (OS X running 10.9.2).   My creative cloud application shows that he added CS6 on 08/04/2014.  How can I get the option "Convert to DNG" back to work?

  -Thanks in advance, Ole Pa

  http://forums.Adobe.com/thread/1450402?TSTART=0

• How to convert multiple DNG size full of lossy DNG in Lightroom?

  Hello

  When I select several DNG in Lightroom and my mac, go to menu > library > convert photo to DNG and then choose Convert to DNG with the lossy mode, only the selected DNG is converted. How to convert more at the same time? I have a large library, and I want to convert ~ 100 GB of photos at a loss.

  Thanks in advance!

  How to convert more at the same time? I have a large library, and I want to convert ~ 100 GB of photos at a loss.

  Using Photos of the library/convert to DNG, if you're in something other than the display of the grid, one photo will be converted even if several are selected.  Its the same way that all orders (perhaps not all) work in library mode, you must be in mode grid for multiple photo stock.

• Keep the name of original when file rename and convert to DNG

  In LR 2.6 when I imported my (RAW) images, I would incorporate keeping the original file number, so I would like to batch rename and convert to DNG, once they were already in my catalog.  As I draw from stock, I keep a meticulous care the registry of what I shoot for purposes of metadata and keywords.  I noticed that when I upgraded LR 3, my in my existing catalogs/folders, the original file names are gone and just the new personalized name & sequencing appear. Unfortunately, I still have the Word key & metadata tag many images, but the original numbering in the camera is now missing.  With my new whatever I did to preserve the original numbering, is to import, make my keywords/metadata, and then rename a batch.  However, having to go back is pain, when in the former is LR was easier.  Maybe someone out there knows how to keep both.  It's just easier to check my notes when I have the original of the image number.  Any tips/ideas/suggestions?

  What means Jeff are the display options in the metadata panel here:

  

  I import, rename and then convert to DNG and as you can see wear the camera file name in the field of origin.

  I don't know why I want as I back up after the name change.

• Unable to see the NAVE converted to DNG files in Photoshop CS

  Aloha, my laptop recently broke and I'm trying to restore my laptop to the way it was.  I use Photoshop CS and back in December 2009, I downloaded DNG Converter.  I use a Nikon D90, taken in RAW.  I don't remember what I did after download the DNG converter but I was able to convert the NEF files to DNG by simpling clicking DNG icon, select the file and click on convert and the NAVE were converted to DNG files.  I have used my Photoshop CS with these files covverted.  In the restoration of my laptop, I loaded my Photoshop CS program and then did a search online for the DNG Converter.  I found a version 5.6 and later a 6.3 version.  First of all, I downloaded version 5.6.  I then clicked on the icon, the selected files and click on convert.  I can see the pictures of the NAVE being converted.  However, when I went in my Photoshop CS program, I couldn't not all DNG files even though I saw the files being converted.  I downloaded the version 6.3 and got the same results.  Also, I went in change of preference and selected Camera Raw 2.4 and later.  But I well I see the files to be converted to DNG, I don't see any of these photos converted into my Photoshop CS program.  Can someone help me?  Am I missing a step or two?  I would be grateful y ' All expertise in this matter.  Also, anyone know how to uninstall one of these format DNG converters, I downloaded?  Thank you very much, Ron

  Well, I finally found the Web page I was looking for.  Go to the link below and scroll down the page until you get your version of Photoshop.  Camera Raw downloads are listed, and you should be able to find the readme file as you go through the process.  Follow the installation instructions exactly.  Let me know how the proven things.

  http://www.Adobe.com/support/downloads/product.jsp?product=39&platform=Windows