Converter and Linux Swap

Similar Questions

• VCP exam question - the difference between the file exchange and the swap partition?

  I am currently a student at my VCP and stumbled upon a question and was hoping someone could explain the answer offered.  Essentially the question is asking why you must manually create a local VMFS volume.  The possible answers were: files of storage for the service console log, decentralized storage for all the vmkernel vmkernel swap activity Exchange files for virtual machines that are configured locally and swap files from service console for the console service RAM overcommitment.

  It is my understanding that the swap partition has its own format.  When you create the necessary partitions for installing ESX format the swap partition is 'swap', not vmfs or ext - 3.  Then, because the last three options are to swap/activity files, I chose the first choice, storage for the service console logs.  This study guide says I'm wrong and the answer is VMKernel swap files for virtual machines that are configured locally.   Of course, Miss me something here...

  How you store Exchange files on VMFS partition?  I thought that the swap partition is the only place to have to Exchange files, and then it is on its own partition.  You cannot store a partition on a partition.

  Maybe it's the difference between a swap file and a swap partition which is tripping me?

  Search for, swap space as it is usually is a place to store a replica of memory the system for the purpose of managing memory better (usually data that are accessed most often).

  SWAP PARTITION is now, for the ESX SWAP space.

  And the EXCHANGE FILE is for some particular VM swap space that can be used by the guest operating system. The use of this file is managed by VMkernel. Now, this swap file has some different features from the windows of i.e normal swap, linux or ESX swap space space.

  NUTZ

  VCP 3.5

  (Preparation for VCP 4)

• Convert the Linux server

  Can someone tell me if I can use the converter to convert a Linux server into a file, and then install ESX on the server that has been under Linux and then run the original server as a virtual server.

  Other ways to get there?

  Use the Converter 3.0.3.

  It can also save on local (or network) file suitable for the Desktop/server/player.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Dual-boot Windows and Linux, but Linux has calendar, TB 31.0

  I'm using Linux Mint and Windows 7 dual-boot. I have TB 31.0 installed on each operating system. TB Linux has a capacity of calendar; in Windows, there is nothing (by nothing, I mean no calendars - I can't see their properties, for example, access somehow).

  I should add that Windows and Linux TB programs share the same profile folder (located on a separate partition), therefore, all of the same modules, passwords, etc.

  The error console records the following:

  Timestamp: 14/08/2014-18:41:33
  Error: Components.classes['@ [cid] is undefined
  Source file: resource://calendar/modules/calUtils.jsm-> file:///P:/PortableApps/ThunderbirdPortable/Data/profile/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/calendar-js/calUtils.js
  Online: 17

  There are a variety of flow on the errors related to this.

  My apologies for posting this in this way; I intend to submit this via the crashreporter, but I can't get the program crash with this error earlier.

  An answer to my own question: it turns out that, while sharing a profile works quite well for most of the cases, with lightning, he does not, like the extension has different versions of Linux and Windows. The problem is solved very simply: by not using is not the same profile for each version.

  Glad to see that no one takes on this one (except me, of course).

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!

• Different features of Firefox Windows and Linux.

  When I want to navigate to another site, and type the new address on the address of the existing page, that with one click on the version of Windows address nicely takes focus and brands all of the text and overwrite is easy, while with the Linux version, I need to score and remove the existing address to crush. I feel really bad at ease during my current position very long address.

  Windows version is XP and Linux Ubuntu 11.04.
  Same behavior with Firefox 3 and Firefox 4.

  You must double-click Linux - Firefox to select the full URL, but that can be changed.

  Type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  Pref. two theses affect this action.

  browser.urlbar.clickSelectsAll - true on Windows, false on Linux

  browser.urlbar.doubleClickSelectsAll - fake Windows, true on Linux

  Double-click each of these preferences to switch to the opposite value, and then restart Firefox.

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A - 005-00L)

  Hello

  I bought a new Tecra A11 computer laptop running WIN7 Pro. I want to install LINUX also. This means that I want to run my laptop in dual boot Win7 Pro/LINUX (a Distributor). Please tell me how to do this.

  There are 5 partitions on the HARD disk:
  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Hey, I need because I was admitted to a course of RHCE (Red Hat Certified Engineer)

  Please help me

  Hello

  I can't give you a step by step explanation, but most distributions offer today a possibility to coexist with Windows.
  When installing the unused free space will be taken by Linux (with the consent of the user of course!)

  What exact configuration you need is impossible for someone else to say, but I would say to make the space occupied by the F player available for Linux.
  You seem to have of enough space for Windows and Linux operating system doesn't have much.

  Some thoughts about setting up your score:

  I touch NOT 1,2 and 5 no matter what. They are your system and a system of internal partitions (recovery and data environment) and wouldn't it be fun to lose.

  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Then choose a Distro (Ubuntu, Mint, Fedora and OpenSuse - suggestion Fedora will be as close as possible associated with RedHat) that will guide you in the steps to allocate space for Linux.
  I suggest however to remove the disk F in Windows for Linux does not start from resizing all partitions.
  I do not know which works perfectly, but will just take time, and will most probably remain pretty useless drive F.

  If you have valuable data on your device, make sure to save! No software comes with warranty :)
  Last but not least - make 100% sure to create a collection set using the Toshiba Recovery Media Creator before you start the installation of Linux.
  If something goes wrong you have the opportunity to put the unit in factory condition.

  Good luck and keep asking you if you need extra help!

  Tom

• Can I charge my iPad using a voltage converter and an outlet of 50 Hertz in Europe?

  IF I want to reload my iPad in a foreign country with 230 v AC and 50 hertz can do with a (at 115 v) voltage converter and still using 50 Hz instead of 60 Hz? Who will work ok without damage to the iPad?

  If you use the charger supplied with your iPad, it will switch automatically. You may need an adapter outlet such as those at Travel Kit for the Apple world.

• The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

  Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

  Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

  Thanks, Shoko.

  In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

  Laptop mouse pad still works?

• What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

  What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

  Microsoft communities must answer a technical question about Windows 8, Windows 7, Windows Vista and Windows XP.

  If you have a technical question, please let us know. This type of information you are requesting is not available in this forum. Do a search on the internet, and you should be able to find this kind of information.

  Sincerely,

  Marilyn

• my creation of windows dvd does not work! whenever I put a file to convert and burn everything stops working.its updated!

  How can I fix my windows dvd creation? It will not convert and burn all the files to a dvd disc.

  Hi egelad,

  (1) you get an error message?

  (2) is this problem limited to only a specific video file format? Have you checked with different videos with different types of files?

  Step 1: Change Windows DVD creation settings and check if the problem persists

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Clean boot the computer, and try to burn (make sure that your burner software service is running while performing clean boot).

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 3: check the Event Viewer logs and check the application and the module that fails to load. See the links below for the steps and let me know

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  If you try to convert a video file in a different format, you can do this using Windows DVD Maker, you can use third party software to do this.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please visit the links below

  Solve problems with creating a DVD-Video DVD Maker usingWindows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Shut down windows 7 to invite the user convert and copy whenever I have a copy on my mobile device

  I copy an avi file on my mobile device I'm asked each time:

  Convert and copy

  You want to convert before nomdufichier.avi it is copied on your device?

  Yes, convert and copy (recommended)

  No, just copy.

  I would like to be able to turn this off, that my files does not need conversion and work fine on my mobile device.

  Thank you very much.

  I suggest that you try to apply it to the Archos or creative forums, you may have better luck there.

• Dual Boot Win 7 and Linux and using Win 7 in a VM

  I just bought a new laptop with Win 7 Home Premium installed. I want to dual boot Windows 7 and Linux and use Win 7 in a VM. What license I need upgrade who will allow me to do?

  Ivan.

  Well, you can use your current license and install a program from the virtual machine and install your Linux distribution you want in the program of the virtual machine with Windows 7.

  You will however need to a Windows 7 full version license.

  Buy and download Windows 7 Professional, home sharing files...

  Regarding the supported Virtual Machine programs, you can use the following text:

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

  Dual-Boot Windows 7 and Ubuntu in perfect harmony

• Using BCD for dual boot Windows 7 and Linux on two separate hard disks

  I scoured Internet for weeks and weeks trying to answer this question with still no success whatsoever.

  What I want to know is:

  Is it possible to use the BCD to boot Windows 7 and Linux, with Windows 7 installed on the hard drive of 1 and Linux installed on the hard disk of 2?  If so, how do you prepare in advance Linux, IE Grub must be on the partition root of Linux or should it be on the second hard disk MBR and what are the bcdedit commands necessary to add an entry for Linux for the start menu in Windows 7?

  Could be read more the real problem before burn.

  Someone wants to BCD of Windows to load * since a brooch * for the ACB or MBR on the operating system on the other drive.

  Unless there is a setting BCD undoc, it cannot manage other partitions on the same physical axis starting it is on.