Cookies and Muse. Newbie question, how will I know if I use

Similar Questions

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• I'm on a free trial for Photoshop, Illustrator and Lightroom CC. How will I know when it expires and how can I register for what I want?

  I'm on a free trial for Photoshop, Illustrator and Lightroom CC. How will I know when it expires and how can I register for what I want?

  HI Margaret,.

  The trial period is 30 days.

  When you launch applications, you will automatically get a prompt with the number of days remaining.

  To subscribe, please visit the link:

  https://creative.Adobe.com/plans

  I hope this helps.

  Concerning

  Megha Rawat

• How will I know if I use encryption 128-bit internet explorer 9 on windows vista

  How will I know if I use encryption 128-bit Internet Explorer 9? I use Windows Vista Home Premium Service Pack 2 with a 32-bit operating system.

  Hello littleturley99,

  Open internet explorer 9 and look in the upper right of the window. You will see an icon of the House, star and a wheel of gog. Click on t he cog icon wheel, and in the drop down menu, click 'about internet explorer '. Look in the window of internet explorer for the "force encryption". This should read 256 Bit.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• My iPad was stolen and exchanged by another how can I know who is using mine

  My iPad was stolen and exchanged for another how can I know who is using it?

  You can use Find iPad to see the location of the device if it is connected to the internet

  Do NOT you go after him - give the information to the authorities

  If you have an iPad that was initially not yours - you can enter - in other words - past the lock of activation?

• How will I know if I use a 32-bit or a 64-bit java?

  Original title: JAVA

  I USE WINDOWS XP SEVICE PACK 3 AS MY OPERATING SYSTEM, I HAVE INSTALLED JAVA, NOW HOW DO I KNOW IF I USE A 32-BIT OR A 64-BIT JAVA? PLS REPLY AS SOON AS POSSIBLE, ITS VERY URGENT.

  Hello

  ·         Using 32-bit or 64-bit Windows XP Operating System?

  If you use 32-bit operating system, you can not install 64-bit applications. You can visit this link and check if it helps:

   

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system

  http://support.Microsoft.com/kb/827218

  http://Java.com/en/download/FAQ/java_win64bit.XML

   

  http://www.Oracle.com/technetwork/Java/hotspotfaq-138619.html#64bit_detection

  If you would like more information about Java you can contact Java support for assistance.

  http://www.Java.com/en/download/support.jsp

• How will I know if I use 32-bit or 64-bit OS?

  Summer format 64-bit (Vista)... went out and back icons and do much more. How can ensure me that I use the 64 bit format?

  Go to start / computer / system properties and it will tell you what format your system is running.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How will I know if I use virtual hosts in my local test environment?

  I appreciate the help I get here, I don't really have. However, when I get answers in the form of questions that assume that I know what this person is talking about, I see nothing but more frustration.
  
  How do I know if I am using virtual hosts?
  
  What is a "root link"? Where would I look for, find or verify this?
  
  Once again, I installed Apache, MySQL and PHP and had initially set up a successful local test environment that worked very well for a short period of time.
  
  One day, something happened and when I make an effort to test a page while using DW8, I get this error in Firefox3:
  The URL requested / .php [filename] could not be found on this server.
  
  In other cases, I get:
  "Sorry, unavailable database"
  
  I so got the crazy idea to open pages in Firefox by double-clicking them in Windows Explorer and select Firefox from the menu "open with."
  
  Different result.
  
  This time, the pages open, without errors, but none of the content appears. As if she opens the pages, but the database is not responding.
  
  Look, I'm over my head, I know that. But I'VE learned until it happened. This has me completely obstructionisme and what I need is some advice clear and useful. I have NO IDEA where else to turn. The development of my site is to a sudden stop.
  
  Y at - it a setting I might have screwed up in DW8?
  
  Is there a MySQL configuration file that I need to check? If so, with what program?
  
  I'm desperate. If there is no help here, please let me know where I could get help.
  
  Thank you.
  
  wordman
  

  David,

  Well, now I feel like a *' fool. That fixed it.

  And behold, it was indeed a setting I changed and messed up.

  Thank you for taking the time to help me. Your support means more that I can possibly put into words.

  See you soon,.

  wordman

• Newbie question: How do I know if the account has access to web services?

  As the title suggests, I'm new to CRMOD, although I have worked with other web Apis.
  Right now I have a CRM account, but get the "capslock" answer in my SOAP call. I think it's because the account is just a regular account and it lacks some rights. How can I tell the admin to grant my account these rights? I don't know how to make such a request in words they understand.

  Hello Daniel,.

  You must identify your role. If you go to mysetup you know your role.

  Ask the administrator to grant 'Activate access Web Services' prvilege to your role.

  This should be good.

  Kind regards

  Paul Swarnapandian

• How will I know what download use to get Service Pack 3? There are 3 choices and I don' t know one to use.

  I have Windows XP Professional.

  Go > here and follow the instructions under "Preview" just after he says: DO NOT click DOWNLOAD if YOU ARE UPDATING a SINGLE computer.
  

• How will I know which applications use my webcam

  I get an error code that says that I can't start my webcam (works on another computer) bran new. Camera Says Error is used by another program. check the Task Manager doesn't show anything. I don't use yahoo or msn messengers.

  Is it possible to see which applications are using a piece of hardware? Because its kind just a goose wild chase looking for applications that can use it.
  Thank you

  Hello

  Check the implementation to see if the camera programs are there.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ==========================================================

  Among other things, messengers and Skype and others can access the camera and
  Some people may not release properly.

  Click right tab taskbar - TaskManager - Applications and processes tab allows you to see
  what might be running. Check the Notification area near the clock in the bottom right
  to see if something is loaded it.

  Process Explorer can provide a little more information.

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How will I know if I use the new synchronization?

  Want to know if I need to go through the new process of synchronization of devices not linking the synchronization of the former and the reset to the new synchronization.

  The servers used for the old version of sync have been taken down and you can no longer access the data stored on the server.
  You can use the new synchronization version that uses a Firefox account (https://accounts.firefox.com/).

  • https://blog.Mozilla.org/services/2015/07/31/shutting-down-the-legacy-sync-service/
  • https://support.Mozilla.org/KB/what-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-set-up-Firefox-sync

• LSI Logic SCSI controller, how will I know if I use it?

  I read in the 4.5 Administrator's guide view that they suggest that you use the LSI Logic SCSI so adapter when configuring the virtual machine, I chose "Custom" and LSI Logic parallel for the SCSI controller and the installation of XP, I did the steps "F6" then "S" and made him a floppy image, I created on the site of LSI and the driver appeared as "LSI Logic PCI Fusion-MPT Driver (XP 32 - bit).  Everything went very well with the installation but I don't see a SCSI adapter that is listed in the Windows Device Manager and in the virtual machine's .vmx file, I open in Wordpad does not from there. I also checked the settings of the virtual machine when he was running down and do not see a SCSI card that there are listed be?

  But in the virtual machine settings, I do not see a SCSI LSI controller.

  You must use SCSI drives instead of IDE disks.

  André

• Conflicting messages from the performance tab.  How will I know if my GPU is effective?

  The performance in LR tab says I have a GPU and identifies it (GeForce GTX 970).  However, when I ask Sys Info it says there is no available GPU.   I have no error messages.  How will I know if LR uses the GPU?  This who should I try if it's not?

  System information:

  LR autonomous 6.0.1

  Win 7

  The system SSD drive

  Work SSD disk (I do not store the files on the system disk)

  Intel CPU 3.5 G

  RAM OF 32G

  Video NVIDIA GTX 970, I just bought the card and the drivers are up to date.

  Thanks in advance

  If your screen is 1920 x 1080, it is unlikely that you will see an advantage to have the GPU acceleration.

  But if you really want to test the GPU, turn on the GPU acceleration and try large amounts of brushing up on a photo. Before turning off the GPU, restart Lightroom, make a similar amount of brushing up on a different photo (not the same photo) and if its faster with GPU acceleration off the coast, then your GPU works correctly. If there is no difference, then its probably not.

  Acceleration in Lightroom GPU is designed mainly for the more major (4K, 5K) monitors.

• How will I know if questionable attachment on an e-mail scam, I opened my I infected mac?

  How will I know if questionable attachment on an e-mail scam, I opened my I infected mac?

  One obvious way is if your iMac behaves differently. You can download and run Anti-Malware https://www.malwarebytes.org/mac-download/