iMac software update

Similar Questions

• IMac software update affect scanning?

  I have a 2008 iMac and a relatively new series 3500 Canon printer/scanner.  After a recent update of my software, I noticed the scanner stop working.  The format is different too.  The printer works fine again; only problem seems to be with some of the scanning.  I get an error message.  What is the update of the software?

  Hi, Judi.

  Thanks for the question!  I understand that you are unable to scan, the scan format is incorrect and you receive an error message.  So that print jobs, I would still go through the troubleshooting steps in the article below because they will also apply to the issues with a sweep.

  If you have another question of impression

  These steps may resolve with no other obvious cause printing problems:

  1. Open the Printers & Scanners System Preferencespane, then select your printer and click the minus (-) to remove the printer from the list.
  2. Follow the steps described in the previous section to add your printer.
  3. If the problem persists, reset the printing system, then follow the steps in the previous section once more.

  If the issue is not resolved, these final measures to avoid that any currently installed printer drivers:

  1. Reset the printing system again.
  2. Rename the file to/Library/Printers:
     • From the Finder, choose go > go to folder. Then type /Library and then click OK.
     • Click once on the back of the printer to select, and then press ENTER to start to rename the folder. Type Printers-old , and then press ENTER to save the new name.
  3. Follow the steps in the previous section once more.

  Get help to solve the problems of printer on your Mac

  OS X El Capitan: print troubleshooting

  If they do not resolve the problem, please reply back with the exact error message you received.

  Please visit Apple support communities.

  See you soon

• iMac 3d party software updates do not work

  I have an iMac 27 OS 10.11.3 24GO RAM and enough hard disk space. Have now two 3d-party software/applications that require updates. Download software updates and then ask ok close to installation of update. This is done, but no update is run and once again demand even the update appears on the old version of the software. I can handle this with a manual download from the web page of providers, but this is not how it should work! No idea where this can be fixed/fixed?

  Have you been in contact with the developers of the applications to see if they are aware of similar problems?

• The HP printer software update repeats

  I've updated to Yosemite on my iMac and the updated drivers from HP and updates for HP 3525 advantage printer/scanner. All connects and works. AP store finds a new "HP Printer Software Update 3.0" update. I installed this update 10 times in the last month, but after installation immediately the same update appears. How can I get rid of this?

  Hey @flynnrey,

  Welcome to the Forums of HP Support!
  
  I want to help you solve the HP printer software update 3.0 Apple that continues to display on your computer Mac OS X 10.10 for your HP Deskjet Ink Advantage 3525 e-all-in-one printer. Please follow the steps below to fix this problem.

  Step 1: uninstall:

  If you initially installed with the driver Package download please follow these steps to uninstall it:

  1. From the desktop, double-click Macintosh HD, and then click Applications.

• Software update does not see Bootcamp 6

  I'm running OS X 10.11.3 (El Capitan) on an iMac of retina end of 2015. I migrated from an older iMac, including to move a partition, Bootcamp with Winclone. I was able to move from Win 7 to 10 to win on the old iMac and successfully get the partition installs and runs on the new iMac, but with intermittent problems.

  Apple Software Update on 10 to win is a recent version, but he claims that all software up-to-date despite the fact that the Win partition is running Bootcamp 4! A downloaded installer 5 Bootcamp will let me install this version (not designed for this computer). However, every time I try to install Bootcamp and WindowsSupport to download drivers, the installation stops with an error in step "checking launch conditions.

  I could enter and update the drivers, but I can no longer use the Bootcamp Control Panel - it claims that I don't have sufficient privileges to change the boot volume, even if I'm using an administrator account. I also get random and BSOD diversions, but not consistently.

  How 6 Bootcamp to install? Other solutions I've seen about having Apple Software Update download it, but mine says I'm updating and then closes. I can't run the installer Bootcamp directly, because he says he needs privileges escalated the use of setup.exe. When I followed a suggestion elsewhere and used a tool called Orca to modify the .msi file to install Bootcamp, I could make a copy and remove both escalated privileges the conditions to launch "requires Windows 7", but it would still not work, saying that I had to be on Windows 7.

  Long story, but what gives? For the moment, it may not be important that I am under Bootcamp 4, but I suspect that this situation won't last long. Mainly, I can't understand how to upgrade the Bootcamp software without backleveling in Windows 7 (which I can do yet, apparently, but not taken in charge on my new iMac) or wipe the partition and fresh install from an ISO and a new activation key (and to try to restore all my files and applications).

  Thanks in advance for any help!

  You should run Boot Camp 5 to proceed to 6. Regarding the latest software support, the options are:

  Boot Camp 5.1.5722 Support software

  Boot Camp 5.1.5722 Support software

• How to disable reviews of software updates that appears every day on my screen?

  How to disable reviews of software updates that appears every day on my screen?

  IOS 8.0.2 does not run on an iMac! What version of Mac OS X you have installed?

  However, the wise thing to do is to install the updates which asked the computer, they are there for a reason!

• App Store > updates to guard to update same EPSON printer software update 3.1

  It's weird...

  I just started up my iMac and noticed the icon App Store showed 1 making available. After opening, it was almost completed download. Then I noticed it was the same EPSON printer software update 3.1 as it has already installed. And after double check on updates again, there were several of them below.

  

  

  The entries repeated elements in the list of 30 days are an indicator that the software has not been installed.

  To check go about this Mac, software, system report and facilities. If it is not listed there no

  installed.

  An alternative would be to go to the Apple Support pages download and download it from there.

  Printer Epson v3.1 for OS X drivers

• OfficePro 8600 all-in-one - function "Scan to Computer", alias software update do not update

  Hello

  On my iMac, after update to the Mavericks, the "Software Update" feature Apple told me that there was an update from HP for my printer. After the update, I got a new feature and a updated printer utility (or the scan utility? I type of memory on a PC at work away from my Mac, so bear with me please). The novelty is "scan to computer" or maybe "scan to folder" - it allows me to scan directly onto my iMac from the printer. I also have a MacBook pro that I have updated to the Mavericks. For the life of me I can't update software to 'find' this HP softawre update. I tried all technical and simple thing I can think (redownloading and install the driver of HP on HP site, deleting driver, uninstall, repair permissions, tranfering manually all the iMac to MacBook HP software, restart the printer, etc. etc. etc.). No luck. I can't get the software update HP on the PowerBook - and the software manually transferred from the iMac comes with an error - so I deleted and am now using the latest driver web page from HP which works fine - with the exception of any scan of the computer have... I'd like to since my PowerBook usually stays on my desk to the floor away from the printer down... by the way, I LOVE THIS HP 8600 printer. All brands of printer, I used it over the years, AND this ONE IS BY FAR MY FAVORITE IN EVERY WAY. Bravo HP!

  Hello

  I had on both Mountain Lion. And yes I got the HP software on the two before moving on to Mavereicks. I'm not sure 100 percent when the HP update came through on the iMac if - it may have been before I upgraded to the Mavericks. But I'm pretty sure that it was after the Mavericks.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Software update 10.0.2

  I downloaded and installed the software update 10.0.2 for my phone this morning and HE HATES! Why Apple does not provide a way to uninstall the update, as an option for pc Microsoft System Restore?  Either that, or allow users to get an overview of what changes are coming, so they decide if they want to install or not?

  What problem do you have? Maybe we can help you to solve. In fact, the new update is good, you just need to get used to it.

• I don't want to install iOS10 on my iPhone. How can I get rid of the notification of the software update

  I don't want to see the software update on my phone all the time.  If I don't want to update the software, is there any way to disable these notifications?

  Hi akathyb,

  Ad https://www.igeeksblog.com/How-to-Remove-Software-Update-Download-from-iPhone-IP.

• my whole macmini is glitching since software update

  Is someone of other bugs knows after software update?

  Sometimes incompatible software by an older system, slows down or

  does not at all in a newer version. It's between the source of a

  question as you describe in a general way.

  And elements sometimes people mistakenly think will help their Mac

  will do damage to the file system, break the macOS and ruin the apps.

  A fairly general topic. You have specific instances or evidence of

  concept, or examples of the question, that you can find a problem?

  The details are important. However something as simple as a list of the

  configuration and software/hardware of your Mac database specifications

  can be useful. You could read http://etrecheck.com/#about and see

  If the report, it can generate can be useful; If post you here, some

  One can read through to see how that may contribute to your problem.

  A new browser or upgrade update can sometimes a specific

  problem; I have a few different Macs with different ages of macOS X.

  So, I see a variety of issues; some of them have been resolved in more recent operating system.

  But do not expect a problem to be solved through upgrade, usually

  What is happening is a problem older or incompatible software

  postponed to poison the poor macOS in a more recent interpretation.

  This is because an upgrade to the existing system has your old

  user account and everything you have installed may be in the Mac still.

  I hope that you have a stern conversation with this Mini and say

  him to straighten out and fly right. In the meantime, the system connects

  and other elements may be able to point to a cause. Problem with log

  files, many people do not understand most of the content. Me too.

  In any case...

  Good luck and good hike!

• Opt out of the beta program (gene software update)

  Hello.

  I participated and enjoyed the public beta of macOS 10.12 Sierra program, but now that the commercial version became available I would go instead to the mainline.

  This morning a public beta of 10.12.1 appeared in the software update.

  Then I went into settings > App Store and disabled the software version beta well rested: the proposed update is still there.

  I went into/private/var/folders/zzz and nuked the content, and updated: the proposed update is still there.

  So I rebooted, and refreshed the App Store new update: and of course, the proposed update is still there.

  How can I get rid of that but make sure I will be alerted when the final version of 10.12.1 is available?

  Or I'll have to live with it and be careful of never clicking on "update all the ' ever?

  Thank you.

  Open the App Store > bought. Find the right purchase of Sierra Beta then control-click / in the white space of his rank and choose hide purchase.

• will not appear 10 under software update iOS.

  When I go to software update, it says that my iOS 9.3.5 is up-to-date. It does not show same iOS available 10. What should I do?

  If you have the iPhone 6, connect to Wi - Fi and wall power supply.

  Make one

  Force reboot

  http://support.Apple.com/en-us/HT201559

  Then try again.

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian