Cool Y510p with removal of dust, good idea?

Similar Questions

• is the power line Networking is a good idea to build werkgroep netwerk with windows 7

  Hello

  1-is the power netwerk line is safer than wifi or it has also some drawbacks.

  2-can we replace cables in small business with power line newterk adapters or it is not a good idea.

  3 can be power supply adaters also suspect to sniff.

  Thank you

  Johan

  "Broadband PLC" was the provision of access to internet via incoming food, not something that was very common or successful.

  Your proposal is entirely internal is so different, for example, they refer to it "are on the same range" as ADSL. HomePlug PowerLAN solutions do not have something like this beach as it is designed to work with a main inner ring.

  Yes, the technology is much improved and the standards are now closely identified. Most units also offer an encrypted mode that allows only of these units in a group sure talking to each other.

• Is it a good idea to replace the 2.5 "HDD (with partition recovery inside) with a SSD?

  Hi all

  I have a ThinkPad E420 with the recovery partition in the HARD drive. I intend to sell the excessive 750 GB 5400 RPM HARD drive and replace it with a 120 GB SSD, because I need responsiveness instead of ability. Is this a good idea?

  Thanks in advance.

  Best regards

  Haris

  Lenovo: 'as sensor airbag, Active Protection System can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data against certain accidents that might happen because of cell phone accidents every day."

  This tool is designed to protect not the mechanics of the SSDS. It would not apply in your case.

• I do not understand this statement "It is a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument."

  It's a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument.

  Which no longer applies in Logic Pro X 10.2.3. In old versions of logic, selecting a range with a software instrument automatically would make this instrument in "Live" mode, which means that the instrument has begun to transform any MIDI in sound with a minimum of delay. This direct mode becomes an instrument need CPU power (on a single processor) and peut overload the audio engine. It is a waste of CPU if there is no direct game. Then select an audio track would ensure that No instrument is in direct mode. Now (LPX 10.2.2 or more) in direct mode can be turned on or off on a track, chosen or not - it is the R button on the track header.

• How to remove the dust in the touchpad on the Satellite U920T

  I have a U920T, using only the touchpad, combined with the touch screen.
  But the touchpad got the block, with little dust inside.

  This is quite annoying on a daily use.
  I couldn't clean with a vacuum cleaner or by blowing air with a bicycle pump.

  Does anyone know a way to remove the dust in the touchpad?

  Thank you
  LT

  I use adhesive tape to remove dust between the touchpad and touchpad buttons.

• G41 - update to Vista Edition family Basic is a good idea?

  sorta, I like to keep my g41 and was curious if an upgrade to Vista Home Basic is a smart idea. as you know, my hardware is a little outta date... Thanks in advance

  James

  Note of the moderator; subject published

  Fortunately, NVIDIA keeps supporting the legacy cards. If most of the distributions out there should work fine.

  If you're new to Linux, I would try Linux Mint on a CD or USB drive. Lubuntu is also a good idea because he goes easy on older hardware. You can continue to try different distros until you are comfortable with one or find one that you like best.

• I think switching from Windows XP to Windows 7, but it seems complicated. Is this a good idea?

  I want to get rid of my security Computer Associates software. It overload my system.

  I believe that a combination of Windows 7 and Microsoft Security Essentials and Web of Trust would do a good job.

  Switching from XP to Windows 7 seems complicated. Is this a good idea?

  I would appreciate any advice. I am a former novice

  Thank you

  Get rid of CA security software and do general maintenance on your system would probably go a long way to improve your computing experience.  See help! My computer is slow!

  Unless you plan to buy a new computer with Windows 7 pre-installed, make sure that your hardware is compatible with Windows 7 (for the most part, this means that Windows 7 drivers are available; problems are more likely to occur with older laptops).  Download and run the Windows 7 Upgrade Advisor.

• Restore my HP Pavilion laptop to factory settings it is a good idea?

  I recently accidentally changed my default settings of the police, I did everything I could, except for the restoration of my hard drive to its default settings. However, since I bought this computer a year ago, I noticed faster internet and less connection issues, as well as some other problems fixed. I'd be willing to sacrifice my default settings for performance, so I was wondering if it would be a good idea to restore my computer to its default settings. Also, I currently do not have records to back up my data, so I'll need to do the same. Another thing, my HP Advisor advised me not to restore my laptop unless I really need to.
  Yet one thing, lightning struck our House a few months ago. Unfortunately, I accidentally turned off my father the day before surge protector. Anyway, he destroyed all of our equipment to wireless internet, as well as the fan of my father. We then contacted AT & T and they sent us a few tricks, with phone, download order software online to make our internet work. I do not have these registered Web sites and I don't know how in the world I would like to reinstall that software. So, I was wondering if I drop everything this software if I did a factory restore.
  Thank you for your time and support, rlnachtigal

  I'm with your HP consultant. Restoring default values should be a last
  Resort. If you need assistance resetting your fonts, start another thread for
  which. I'm sure you will find the repair of fonts one relatively simple
  task, compared to the restoration of your PC.
   
  "lnachtigal" wrote in message news: ec23156a-a398-40da-9465-20dd2c358d08...
  > I recently accidentally changed my default settings of the police, I did everything what I
  > could, except for the restoration of my hard drive to its default settings.
  > However, as I bought this computer a year ago, I noticed
  > faster internet and connection issues, as well as other less
  > issues fixed. I'd be willing to sacrifice my defaults
  > performance, so I was wondering if it would be a good idea to restore my
  > computer to its default settings. Also, I currently do not have the disks to
  > save my data, so I'll need to do the same. Another thing, my
  > HP Advisor advised me not to restore my laptop unless I really need to.
  > One last thing, lightning struck our House a few months ago.
  > Unfortunately, I accidentally turned off my father surge protector the
  > night before. Anyway, it destroyed all our wireless internet,
  > fan of my father. We then contacted AT & T and they sent us a few
  > Stuff, along with order of phone, download software online
  > to our internet job. I do not have these registered Web sites and I don't have
  > know how in the world I would like to reinstall that software. So, I was wondering
  > if I drop everything this software if I did a factory restore.
  > Thank you for your time and support, of rlnachtigal
  >
   
   

• Good idea to save to shared dir *.db files / sdCard?

  Hello
  I was wondering, is it a good idea to save files *.db APP to one of the directories in the file system to backup purposes or Let's save it in the directory without extension ".db"?

  Any other way to back up the data if sqlite is used?

  I'm not totally "want to share my table with any organization!

  Thank you

  S.

  Bad word really like the hash usually means change the bytes to something unreversible in this case, I meant just dressing up the bytes on the eye if you load a file into a byte editor it will be immediately obvious, it is a database file.

  So reverse the order of the bytes in the file or write as hex codes (will double the size of file), something along these lines that will prevent a casual viewer.

• Trouble with application sining in momentics ide

  Hello! I develop 10.2 native sdk application. When I try to create the Release version and sign with my certificate of momentics ide shows me the following errors:

  "Error: Code signing request failed because [access_shared] entry-Point-System-equity is not allowed."

  and

  "Error: Code signing request failed because [access_internet] entry-Point-System-equity is not allowed."

  But it is part of the official documentation of development BB:

  Element value prompted limited since

  access_shared

  Yes

  NO.

  BlackBerry 10.0.0

  Element value prompted limited since

  access_internet

  NO.

  NO.

  BlackBerry 10.0.0

  This means that permissions app 'access_shared' and 'access_internet' are available from 10.0.0 API level and above.

  My bar file permissions - descriptor.xml:

  run_native
      access_shared
      access_internet

  How can I fix this error?

  Thank you.

  Hoc is in votis.

  The current syntax for the authorization of the app should be without the system attribute, that is to say:

  access_shared
      access_internet

  is a good way.

• How to treat several Photos with removal of Haze Auto

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  r398tow wrote:

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  Unfortunately, you can only batch with commands in the option "treat multiple files" of the editor or the 'Export' one in the Organizer. Action would be able to combine several orders for a single file, but do not use the command given on a lot. You would need a script for this.

  The two new orders to 14 elements (haze removal and shake reduction) can be very effective, but they can also produce strange artifacts... Their use in the batch may be undesirable.

  I recommend the following solution to improve lots of files needing to increase the local contrast:

  If you work with raw files, open a small batch of files from the Organizer in the ACR module. Use the cursor to 'clarity' to all files in the batch and add some sharpness.

  If you work with JPEG files, use the editor and choose "open in camera raw" option for your batch chosen files from the file.

  Who should provide a good improvement to most of your files. You can use two new orders than in the pictures with the specific defects:

  -shake (common with telephoto lenses) removal

  -mist removal (not only haze, but images softened with "flare")

• Problem with Remove-VDSwitchVMHost

  Hi guys,.

  First of all... Here's the PowerCLI version I use:

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.1 Release 2 build 1012425

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.1 build 768137

  VMWare ImageBuilder PowerCLI component 5.1 build 768137

  License of VMware PowerCLI component 5.1 build 669840

  VDS's VMware PowerCLI component 5.1 build 1012428

  VMware vSphere PowerCLI component 5.1 build 1012428

  I'm having a problem with Remove-VDSwitchVMHost which is a bit frustrating. I have a script that I use to rebuild hosts in my environment when we upgrade versions. I recently changed my vDS switches. When the host is rebuilt, there is a phantom entry in the vDS for the old server. For some reason, I can't remove it with Remove-VDSwitchVMHost.

  

  The two hosts in this group appear in the GUI. Esxt21 is the server, I just rebuilt and added to the vCenter.

  When you go through PowerCLI, it presents different information:

  

  When I get home: get-vmhost $vmhost | Get-VDSwitch nothing is returned. If I list the switch first, then get-vmhost, it shows data:

  

  Get-VDSwitch $vDSName | get-vmhost $vmhost | Delete-VDSwitchVMHost does not seem to work either.

  I can delete the host via the interface graphics, but which goes against the idea of a script

  Someone had a bit of luck with this?

  Thank you

  Dan

  Got, it works now! Here's the code to work:

  $vmhost = "myhostname".

  $vDSName = "myvdsname".

  $vmhostid = (get-vmhost $vmhost) .extensiondata. Moref.Value
  $vDS = (get-VDSwitch $vDSName)
  $vDSView = get-view-Id $vDS.id
  $vDSView.UpdateViewData)

  # - ReconfigureDvs_Task -
  $spec = new-Object VMware.Vim.DVSConfigSpec
  $spec.configVersion = $vDSView.Config.ConfigVersion
  $spec.host = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec [] (1)
  $spec.host [0] = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec
  $spec.host [0] .operation = 'delete '.
  $spec.host [0] .host = new-Object VMware.Vim.ManagedObjectReference
  $spec.host [0].host.type = "HostSystem.
  $spec.host [0] .host. Value = $vmhostid
  _this $ get-view-Id = $vDS.id
  _this $. ReconfigureDvs_Task ($spec)

  Thanks for your help!

• Why flash keys, not a good idea?

  I'm trying to understand a problem I have with flash keys (especially as I don't want users to have to click twice to make them work), and I keep seeing messages (especially by Murray) asking if the poster knows that flash keys are not a good idea. However, I was unable to find an explanation as to why they are a bad idea. Can someone explain it to me in simple terms? I am very new to Dreamweaver and web development in general. I'm developing an intranet site for a specific user group where accessibility is not a huge problem.
  
  Thank you!

  .oO (bhkate)

  > However, I was unable to find an explanation regarding
  > why they are a bad idea. Can someone explain it to me in layman
  > terms?

  On a Web site accessible to the public, it is generally a very bad idea to build
  the most essential part of a site Web - the navigation - technical
  which may or may not be available on the client side. The only really
  reliable is HTML, which will still work. Something else must be
  considered optional.

  Of course, there is nothing wrong with the addition of CSS, images, JavaScript or
  same Flash, but you must make sure that the pages work also without
  These techniques. In many cases, it is possible to provide alternative
  content, for example for images ' alt' attribute. Even the use of
  Flash allows you to provide alternative content, but most of the people do not
  use of this ability, either because they do not know it or they
  Use a browser that does not support.

  > I am very new to Dreamweaver and web development in general. I am
  > development of an intranet site for a specific user group where accessibility
  > is not a huge problem.

  Even on an intranet, it is IMHO important to take care of the standards and
  usability problems. A good example is the typical "we all use IE in our.
  ' intranet, therefore optimize us the site for that. This may work for now and
  Maybe more time, but what happens if one day the IT guy decide to replace
  IE with a browser more advanced to improve the security of the intranet and
  the productivity of enterprises? * kaboom *.

  Apart from the web standards and optimization for a particular browser or
  platform always means a lot of unnecessary work to do in the future.

  Micha

• Unnecessarily put in af:form usesUpload = true, a good idea

  Anyone know if the attribute of usesUpload af:form true regardless if we use a tag af:inputFile a good idea?
  
  Why I asked:
  
  We have set up a page template to can be used by many applications. The default model injects an af:form among others tag in an application page by using the template. Our applications via ADF feature libraries do use bounded workflows based on fragments of the page within the regions, in our application pages, which in turn use the page template.
  
  Each bounded workflow functionality is really defined task flow itself. In theory the stubborn workflows can include a page fragment that uses the tag af:inputFile. In order to support the component af:inputFile the tag of af: parent must have form it's usesUpload attribute set to true. However, in the case of the page fragment the form tag does not in the fragment, but rather in the page template which includes the region containing the stubborn workflow. As such, seems, it turns out to be necessary in order for the page template / workflow support different delimited area use cases that may or may not use af:inputFile, we need the af usesUpload: form = true nevertheless.
  
  But my concern is, there will also be bounded task flows which do not use the tag af:inputFile. So if we set usesUpload = true unnecessarily will be setting us up? Is it a bad idea to set it to true when you're not you transfer files?
  
  See you soon,.
  
  CM.

  Chris,

  Within the ADF faces when there is a file in the MESSAGE, we do a backup of an AJAX post in a former type of coding for the publication of HTML form via an iframe hidden with multipart/form-data specified as its form. It's a more verbose mechanism and the syntax for the data transmission.

  If the input file has no file or there is no inputFile components in the form, we do not have relief. We produce a regular XHR post to the server. So only when the MESSAGE actually contains a file there is no impact.

  That said, it just doesn't feel good to always set usesUpload = true, even if you never ever use to download a file. Your first thought to include an attribute in an exculpatory as suggested by jurkiri is more elegant. It is the approach taken in the adf-richclient-demo.

  The other approach, you mentioned (i.e., set the attribute on the tag form programmatically when a stubborn workflow is called) will involve a few extra minutes. However, the client library is smart enough to not joking don't not with the actual MESSAGE. Again, it is all in the ADF Faces.

  Outside of the ADF Faces , it is a very bad idea to have always enctype = "multipart/form-data" on the HTML

  element.
  It generates a bigger POST request because of the http headers, and it simply does not make sense.

  So bottom line:

  In ADF Faces Rich Client, there is NO downside to always have usesUpload = true.

  Outside the ADF Faces, his is a very bad idea.

  In both cases, it is more elegant to just set usesUpload = true if really needed.

• How to restore the devices with removable storage "missing icons

  HelloW sir This is krivy! for some time more I'm months local disk G not displaying don't not its icon (devices with removable storage) totally absent I m so depressed about this because I m unable to put my pen-drive & usb Cables & having so much work to the system that has information in the key USB sir could you tell me a solution for this problem

  Hi krivy,.
   
  Method 1: Check if the drive is visible in disk management.
   
  a. right click on my computer > Manage > Disk Management > right click on the removable storage drive and select Change drive letter > select a new drive letter not already in use.
   
  See if that helps.
   

  Method 2: Run the troubleshooter from the link given below and if that helps.

  Hardware devices not detected or does not