Copied a jpg from a removable drive (j). where is he on now?

Similar Questions

• I copy / paste a file from a hard drive to a usb port and now I lost the USB I get the hard drive?

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  Tuesday, June 26, 2012 13:21:43 + 0000, MarvinBester wrote:

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  "Deleting" a file does not actually delete it marks just the space
  also available to be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.

  So your chances of successfully recover this file are decent if you
  Try it again immediately after the deletion of it and go quickly
  downhill from there. If you have used the computer since then (for
  example to write this question and read this answer), your chances may
  be very poor now.

  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer (do not
  it on yours because that would overwrite the files you want
  Undelete) and bring it to you on a CD or thumb drive to try.

  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.

  Ken Blake, Microsoft MVP

• Copy-move content from the C drive to a new larger disk? (space)

  I have Windows XP and other applications and data files on a hard drive a little lack of space and would like to copy on a larger drive (500 GB), there are commercial software on the market by Acronis that will do that; However, I was thinking about this method that uses the copy program. This will work.

  1. install the new drive as slave.

  2. make a bootable XP floppy or flash drive.

  3. go to the root of the old drive and select all the files in the Explorer.

  4 locate the WIN386. SWP file and unselect by using the CTRL key.

  5 copy all old drive to the new drive.

  6. remove the old drive and change new master drive.

  7. new boot disk.

  8. If startup does not work, start by using the startup disk or a flash drive.

  9. to invite him back, type "Sys C:".

  10. Remove boot floppy/flash drive and charge it.

  11. If this does not work, buy commercial software.

  10 first steps will work? It would be certainly much cheaper, but if I know that it won't it allow me to save a lot of time and unnecessary copying.

  Do not work, unless your disks are both in the FAT32 format - and you can only do with a 500 GB drive

  Your best shot would be to use a correct application of cloning or patition manager to do the work for you.

  Some have a free trial that will work before it runs out.

• Every time I have copy the files from the DVD drive or pen, why a file called Thumbs.db is added to each folder. Is this a virus

  Whenever I have copy files from a DVD or a pen drive of a computer to my laptop runs on Windows Vista, I find that a file called Thumbs.db is added to each folder. Why this happens. This means that the DVD or pen drive is infected.

  If I delete this file or format these DVD player or a pen, then it is not readable in the laptop or another computer.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ba94c6d5-AD68-4EAA-8ac7-79eba4ff6161

  It will be useful.

• I tried to copy the pictures from my digital camera on computer memory card and now I can not find them, and they have all been removed from the map. What should I do?

  I inserted the memory card from my digital camera in the slot on my HP laptop.  I went into my computer and 'file' tab and press "copy".  He asked a folder name called 'Photos '.  I then went in the 'photos' file and it says it's empty.  I then inserted the memory card in my camera and were not the picture about it.  I am so upset... There are 665 photos that can never be replaced.  What should I do?

  Hello

  The operating system that you are running on your computer?

  You may have set the option "Erase after importing" when importing the photos. At the end of the import process, then pictures should appear in the Windows Photo Viewer.

  Open the Windows Photo Viewer and check if you can see these photos.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-digital-pictures

• Copy the files from the flash drive on the hard drive but I don't want to copy the files I already have.

  I have Windows XP.  I have a flash drive with many files that I have on my second hard drive.  I just it copies the files that I have on the hard drive and I don't want to have to sit and answer 'yes' or 'no' question about the replacement of files each time that it recognizes a file duplicate. How do I do that?

  When you see this double prompt or not, are there not a checkbox that says something like "Always do this for all files" or something in that sense?
   
  You can manually copy the files. Here is the CTRL key while you click the files you want and then just drag them to the location on the HARD drive.

• How can I transfer/copy a program from the hard drive on my computer on an external hard drive plugged into a USB port on my computer?

  transfer of a program on an external hard drive.

  What exactly are you trying to accomplish (goal)? You cannot save a program by copying its files/folders in Program Files in an external hard drive. To save programs, you must save the installation - CD, DVD, or the installable executable if downloaded media on the Internet.
  MS - MVP - Elephant Boy computers - don't panic!

• I just cleaned the gills vacuum in my desktop iMac computer and removed and cleaned where is ram and now my iMac does not illuminate and the screen is black. My external hard drive turns on and I can hear it running, but that's all. Any ideas. I'm devasta

  I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you

  Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.

  I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.

  Hold the Apple store nearest to the assessment of the iMac.

• How can I download pictures from a removable disk?

  my computer is not download my photos from a removable drive, any suggestions?

  More details please... What are you calling a removable disk?
  And how do you access it?

  Removable disk as in going... Start / computer... and see
  the list of removable disks that represent the locations of media
  Reader? if_Yes_right click on the removable disk that corresponds
  with the memory of your card and choose open or explore in the
  menu. This should display the directory of the card and allow
  allows you to copy and paste or drag and drop the pictures in a folder on your
  hard drive.

  Also, you may need to adjust the automatic run settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• Cannot copy a file to a removable device

  When I try to copy a file to a removable drive, it shows me an error "YOU NEED PERMISSION TO PERFORM THIS ACTION."

  I also tried to change the setting, but it shows no security tab in the properties of the removable device

  Being that the drive is using the FAT32 file system, there is no security clearance, whatever she is available to control access at the local level, the only FAT32 permissions available share permissions, but sharing on FAT32 permissions restrict access to the network only, no access by users working directly on the computer.  This leads me to believe that a policy of access to removable devices or media control is enabled on the computer.

  Control read or write access to removable devices or media

  John

• Copy the library from an external hard drive to another catalog EHD and sync

  Already, I saw this link but it doesn't tell me how to copy the library, it simply moving photos from one hard drive to another How to copy files to an external hard drive in Lightroom "Julieanne Kost's Blog of »

  I want to know how can I make a second copy of my library on my second drive, backup in case where my only main falls down and I want it so that my catalog can be synchronized with my second backup drive.

  Any ideas?

  The easy answer is to-

  1. close Lightroom

  2 use the software to 'mirror' of your Master images folder and subfolders of the primary transmission to the second DHM operation.

  Some free Windows software-SyncBack, MS-Synctoy, FreeFileSync.

  * If your Lightroom catalog file exists in the records of Master images, it will appear in the "mirror".

  * You can exclude the... Previews.lrdata folder of EHD. (it can be huge, and it can be re-built)

  * Note: "block mirror" made an exact copy of the files, it adds new files and removes the file 'deleted' SMT. It should not be used as a backup of the system-Deleted files are also deleted from the "mirror".

  * Note: You must not access the EHD copy using the catalogue work Lightroom on the main drive - this will only create chaos.

  3. If you want to restore from a system crash JEP 'mirror' will catalogue and image files in the exact state at the time of the last "mirror." Copy everything back to the main unit and open the catalog. LRCAT file. Lightroom is back in business.

• I have 12 items and copy/move to a removable drive doesn't recognize DVD/CD player on my iMac. Elements of 10 was OK!

  I have 12 items and it does not recognize my DVD/CD drive when you use move/copy to removable disk. I have an iMAC with LG player. Worked well with Elements 10 but 12 does not see the drive. Any thoughts?

  @

  For the last two versions is no function of CD/DVD in the mac version at all, probably as a result of apple from optical drives of every new Mac a few years ago.

  You must use a removable drive instead.

• Once that a file is uploaded to iCloud drive remove it from my hard drive to free up space?

  I want to free up space on the hard drive of my MacBook Pro. Once I have download on iCloud can I delete from my hard drive and still maintain a file of cloud?  Another way to put it: once a file is uploaded to iCloud by car, if I remove my hard drive it will remove automatically iCloud drive?

  Thank you

  David Goldsmith

  [email protected]

  iCloud Drive is a synchronization service. If you delete a file from iCloud, it is removed from iCloud drive and vice versa.

  It is not an effective way to free up space on your MacBook.

  

• How to copy data from one hard drive to another after the upgrade?

  I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

  What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

  Please read this link to another post made by Big_Dave and myself

  http://h30434.www3.HP.com/T5/desktop-hardware/hard-drive-imminent-failure-problem/TD-p/438567

  (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

  (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

  Cloning software to copy the two partitions. Example:

  Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

  New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

  The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

  The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

  After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.