Cannot copy a file to a removable device

Similar Questions

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Windows xp sp2 Setup error: Setup cannot copy the file: usrshuta.exe.

  I want to install windows xp sp2 on the new hard drive and got the following error: Setup cannot copy the file: usrshuta.exe. How to do this?

  Hi grant561,

  Usrshuta.exe is a process belonging to the family of US Robotics communications hardware and provides additional support to the US Robotics modems.

  I suggest that you disconnect all external devices connect to the computer except the keyboard and mouse and proceed with the installation.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Setup cannot copy the file hpinkins5412.exe

  Setup cannot copy the file hpinkins5412.exe

  Using full features software and pilot OJ6500_E710n - z_334.4

  When I use this version:

  full feature software and driver OJ6500_E710n-z_1315

  All software installs normally.  I get all the correct screens.  I connect to a network printer. He fined the printer. He asks me where (postcode), I use the software.  I re - start.  The drivers are not installed.  I have run the diagnostics.  He said that the drivers are not installed.

  HP Officejet 6500 has more 710n

  XP Pro sp3

  I solved the problem with the latest version of the software:

  full feature software and driver OJ6500_E710n-z_1315

  The pilot would not have installed.  I used this web page to fix:

  http://support.HP.com/us-en/document/c01084522

  Thank you

  Docfxit

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• Cannot copy the files in my Satellite Pro A210

  I recently removed some files from my satellite pro A210 (don't know if this is related to my problem). I have a Samsung digital camera - when I try to upload photos directly connecting the camera to the laptop, I get an error message that says "cannot read file '-if I remove the card and put it in the holder of the card on the laptop I get nothing. Any help would be appreciated...

  John

  What operating system do you use? Have you full access to the yout phone using the usb connection?

• How to access files on a removable device that I have connected successfully?

  I am running a vm Centos57 VM Workstation 8 under Windows 7 Ultimate on a box of Alienware.

  After the virtual machine starts, I'm going to VM > Removable Devices and connect my Western Digital external hard drive.

  I know that the connection is successful, because if I go to/dev/disk/by-name, I can see the name of the removable device.

  So far so good.

  How to access files on the drive?

  Sorry to be so stupid, but I'm a newbie, so please inform promptly.  Or, if you're local to Nashville, call me at the 615-613-2123.

  Thank you muchly

  David Halitsky'

  cell 615-613-2123

  [email protected]

  package fuse-ntfs - 3g seems to be missing in your Centos
  read
  http://www.CentOS.org/modules/newbb/viewtopic.php?TOPIC_ID=24079&Forum=37

• Cannot copy the file 6.89 on Toshiba 250 GB HDD USB external

  
  

  Hello

  First, you should check the properties of the HARD drive. You can also do in under Computer Management disk management.
  Should there have listed everything on the external HARD drive.
  You could further format the disk with NTFS and check if it of possible to copy this file again.

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• Cannot copy the file from pc shaped runtime (windows) using HOST

  Dear all:
  
  I write more code to copy to rename a specified file from a pc to another pc.
  
  PROCEDURE copy_image_file (out_file_name VARCHAR2) IS
  in_file_name VARCHAR2 (100);
  in_file_path VARCHAR2 (100);
  out_file_path VARCHAR2 (100);
  the_command VARCHAR2 (2000);
  BEGIN
  CHECK_IMAGE_FILE;
  in_file_name: = pk_parameter.setting ('IMGSFILE'); - Source file
  in_file_path: = pk_parameter.setting ('IMGSPATH'); - Source path
  out_file_path: = pk_parameter.setting ('IMGTPATH'); - target path
  
  the_command: = 'move' | in_file_path | in_file_name |                                    ' '|| out_file_path | out_file_name;
  
  Message ("Moving File...");
  Synchronize;
  Host (the_command, NO_SCREEN);
  /*
  * Check if the command succeeded or not * /.
  IF this is Form_Success THEN
  Message ('error - file is not moved');
  ON THE OTHER
  Message ("file moved successfully");
  END IF;
  END;
  
  It above coding works fine (managed to pass the file) when I run this code from my own PC (seen developer complete installed), while when I run this code from a Client PC (having occasionally forms run) he executed the successfully but don't move not not the file.
  
  I would like to know the reason for this?
  
  Kind regards
  
  Hassan

  Is this the same thing that Re: check the existnace file before using the HOST command? you forgot to prefix cmd /c in your order I see in your code. What forms version are you on? If you are on the Web, host forms will run on your middle-tier (which is on your developer machine, the same as the customer)...

• When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

  He asks me to specify a location and also proposes to ignore this file that I don't know what to do

  Hi Lisa,

  You are able to correctly install the other updates?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• SP3 for Windows XP Home Edition installation failure. "Setup cannot copy the file wmpcd.dll.

  After that I bypassed this error, he continued to install SP #, but then could not find "wmi.dll',"msjet40.dll"and one bunch of others. Should I have to interrupt the installation?

  problem solver Windows xp service pack 2/3

  http://winhlp.com/node/125

  Give it a try and see if it solves the problem

  http://support.Microsoft.com/kb/950718

  http://lmgtfy.com/?q=slipstream+Windows+XP+Service+Pack+3