Copy and pasting of e-Learning Game brothers in Captivate

Similar Questions

• Cannot play card games or go back in browsers and can not copy and paste.

  Cannot play card games because cards won't move barely and solo cards to jump. Pages back far too often when I click the back button in ANY browser. I can't even copy and paste because the words will not remain highlighted. This started after I downloaded Advanced System Care, but I uninstalled and did a full factory restore but still doesn't change anything. How should I do?

  Hi anyone,

  1. do you get an error message?
  2. the problem occurs only with?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2
  Try the steps from the following link:

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Method 3
  Enable and disable the game
  Step 1:Disable games for Windows:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. go to the games and uncheck the brand in front of solitaire game.
  4 restart the computer
   
  Step 2: Turn on Windows games:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. go to the games and place a check mark in front of the solitaire game.
  4 restart the computer.

  
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

• I can't copy and paste from Word to the Internet (Firefox or Chrome), but I can copy and paste from the Internet to Word

  I can't suddenly to copy and paste text from Word to the internet (Firefox or Chrome, other Web sites or e-mail), but I can do the opposite. Any ideas? Copy paste works between Word documents and it works between websites (for example, e-mail web page), but not the word to the internet. Help, please. I need to copy and paste my CV to apply for jobs online.

  Great answer. You just saved my HP to learn to go through walls.

• Copy and paste the help.

  I'm pretty new to this design thing and I am running CS3.

  Basically, I'm trying to copy and paste from a doc on a new photoshop to create textured prints.

  I was able to do it once, and with the notes that I took, I can't figure out on my own.

  Whenever I have paste my selection since the first doc to the next, there is a white border around my selection who shouldn't be there.

  I'm missing a step between flattening and the unlocking of a layer in the first doc the next doc.

  Here's a screen shot that will probably explain this better than I. Any advice will be greatly appreciated! Thank you.

  

  The new doc has the reddish background.

  The doc on the extreme left is the only one that I can not understand how to change in a way where I can copy and paste without having this white border around my selection in the new.

  In the Middle, one has been done correctly, I just can't figure out what step I'm missing.

  What can I do to get the result I want?

  Thank you.

  Hello!  Is one simple way to accomplish what you want to use a blending mode multiply.  For example, in the document right in your screenshot with red background, you can select Layer 1, the model with the white border and change the normal to multiply in the Modes of mixing down blending Mode.  See the screenshots below.

  

  

  A layer set on multiply darkens only the lower layers, so the white border copied with the texture wouldn't appear on a red background.  You can learn more about the blend mode multiply here: http://www.photoshopessentials.com/photo-editing/layer-blend-modes/multiply/

  I hope this helps!

• action script does not work even when I copy and paste good sites! Why?

  Hello, I'm fozb studios. I would like to start making games. I can not because when I try to follow the examples I have a lot of mistakes (I even copy and paste the code so I know its not just me.) I'm good enough to understand what the tutorials say to me but when I test the examples of anything. I mainly use develop php (http://www.developphp.com/), they seem credible but I have used other sites to be sure, and the same thing happens. What I am doing wrong? Is this a setting? What is my Flash copy corrupt? If you could please try the tutorials develop php it would be great. If I provide my mistakes for a specific example that would be easy.

  Thanks for your help,

  Director fozb

  In fact, what you should do first, just to verify that your installation of Flash works properly, is to download the source files for one of the tutorials at gotoandlearn.com, open the fla file in Flash and run the file.  Just trying to get a simple that does not involve several files to run.

• copy and paste in iOS on iPhone 10 6

  Copy / paste is not consistent. I have to turn the phone off and restart in order to copy and paste into the Pages and the copy of the mail, for example pages.

  The copy and paste can be restored Pages?

  I do not use Pages, so I can't comment on that. But if a reboot seems to fix, it may be something anyone able to help out.

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• Formula works in a line, but the same formula (copied and pasted) work not in other rows.

  I have a formula which, if there is a number in the box, multiplied by a price, then sums the results in a final column. I copied it in 7 rows. He changed that required line numbers, the formulas that look all right, but nothing than to do the work of other 6, it seems to me unless I fill all the blank cells in row 0. Curiously, one that works is not that I typed the formula in the original line, and it has empty cells.

  Here's the formula, each column has a product, then the cell is multiplied by a number, this number being the cost of the product. If there is no product sold, the cell is empty, so it is 0.

  IFERROR ((B6×50) +(C6×30) +(D6×60) +(E6×40) +(F6×30) +(G6×25) +(H6×25) +(I6×20) + (6 × 20) + (K6 × 25) +(L6×20) +(M6×15) + (6 × 10) + +(O6×10) (P6), 0)

  Ideas?

  Thank you!

  Here's a way to do what you call:

  I guess constant multipliers are immutable, when used on different lines...

  

  In this example, the multipliers are stored on the first line (but can be anywhere you like).

  A2 = SUMPRODUCT (B$ 1: $ 1, B2:P2 P)

  It's shorthand dethrone select cell A2, and then type (or copy and paste it here) the formula:

  = SUMPRODUCT(B$1:P$1, B2:P2)

  Select cell A2, copy

  Select cells A2 at the end of the column, paste

  The constants are set up like this:

  

  Here is the table already set up (you can copy and paste here) then you can just add the formula:

  	50	30	60	40	30	25	25	20	20	25	20	15	10	10	1
  381	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1
  50	1	0	0	0	0	0	0	0	0	0	0	0	0	0	0
  30	0	1	0	0	0	0	0	0	0	0	0	0	0	0	0
  60	0	0	1	0	0	0	0	0	0	0	0	0	0	0	0
  40	0	0	0	1	0	0	0	0	0	0	0	0	0	0	0
  30	0	0	0	0	1	0	0	0	0	0	0	0	0	0	0
  25	0	0	0	0	0	1	0	0	0	0

  0

  0

  0

  0

  0

  25

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  0

  0

  0

  0

  0

  20

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  0

  0

  0

  0

  20

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  0

  0

  0

  25

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  0

  0

  20

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  0

  15

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  0

  10

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  0

  10

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  0

  1

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  0

  1

  50

  1

  60

  1

  30

  1

  20

  1

• How to copy and paste into the search engine does not work?

  How to copy and paste into the search engine does not work?

  It should be.

  Restart your Mac and try again.

  Other than that, make sure that OS X is updated.

  Open the App Store, and then select the updates menu.

• When I try to highlight the text my cursor turns into a hand/fist who just drag the page. I need to be able to highlight, copy and paste text.

  I have to be able to highlight text on web pages, copy and paste. But when I click on my mouse left button, he made a hand / fist which simply dragged the page.
  How can I get to where I can highlight text?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Copy and paste are all messed up

  The basic function of copying and pasting in Firefox seems to have changed on me and I need to the way it was.

  He used to work as it does in other Windows programs. I could use Ctrl-C or right click and select 'Copy' in the popup for copy, Ctrl + V or right-click-and-select Paste. But now that the of all messed up because it seems that simply * SELECTION * text enough to copy. I can see how for some people who would be a productivity gain, but a lot of things it messes up I have to be able to do.

  For example, I often need to select text and REPLACE it with something stuck in fact. I can do it no longer. I need to remove the text manually then to separately copy/paste, add an unnecessary extra step. Another must-be-dirt-simple operation that this bug turns into an exercise in frustration becomes the text I wrote previously (in, say, a blog entry) in a link; This no longer works. Workarounds exist, but they are slower with more steps in the way I'm used to doing things, otherwise they only work in the narrow specific scenarios that do not always apply.

  In short, for the way I work this is an * ABSOLUTE, NON NEGOTIABLE REQUIREMENT * selection and the copy to be TWO SEPARATE THINGS.

  When and why it has changed, and more importantly, how do I change it back?

  Sorry for the expression of 'mystery windows', I should have changed that after pasting from another thread.

  The only extension that looks as if she would care to any selected text is 'count-Word-professional '. Hmm... research on...

  Yes, he seems to have a function to automatically copy to the Clipboard, according to her page on the site of modules. Based on the screenshots, there seem to be an option in the context menu that can switch between manual and automatic:

  

  If this does not work, you might find the parameters of the extension on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Find the extension on the right, and then search for an option button.

• How to copy and paste from Thunderbird.

  Hello

  I know that this may seem obvious, but my question is not how to copy / paste because I know that orders.

  The problem is that whenever I have copy and paste all the texts that it sticks adds an extra space in it, so I need to go and remove the space, so it would be normal and not double spacing.

  I tried searching all possible options, but could not find any way for texts get pasted correctly.

  Any help would be appreciated!

  Open Tools/Options/Advanced/general/Config. Editor and double-click the preference layout.word_select.eat_space_to_next_word to activate it false.

  http://KB.mozillazine.org/layout.word_select.eat_space_to_next_word

  Same thing for Firefox, if you wish.

• Can I select and copy and paste text from a browser with the pencil of Apple?

  With the pencil of Apple on a new iPad Pro, I am not able to select, copy and paste text from a web page in Chrome or Safari. Y at - it a special order? A related question (not with a pencil): how to save files in PDF format.

  Well, it seems to be workin now. Never mind.

• 'Improved' TB does not allow me to copy and paste from Word you can solve the problem?

  With the wonderful Thunderbird new and improved, I can not copy and paste Word text in an email because when I try, it has no line breaks. How can I fix?

  CTRL + SHIFT + V paste unformatted text.

  My guess is that Word is wrapping the text in a table to make it look exactly as it did in word.

• I've lost the ability in pages of copy and paste graphics

  I really like the pages if I need to copy and paste something, IE recipes with photos, but for some reason that my request has lost this function. Can someone help me please.

  I'm on iMac 10.5 Maverick.

  Lynne

  What specific version of Pages is in use (menu Pages: pages)? Apple logo: free from the about this Mac for the current version of your Mac OS X.

  Text is simply copied and pasted, but document objects (images, tables, forms, text box, graphics, etc.) must be singularly selected, copied and pasted between documents.