Copy files from my computer to a host ESX 3.5

Similar Questions

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code 0 x 8007052 when copying files from your computer to a memory stick

  Original title: error code 0 x 8007052

  Hi, I'm copying pictures on a memory stick.  About half were copied everywhere but now I get the above error code and the remaining will not pass.  Any ideas, thanks

  Hi Mary,

  If I understand correctly you get an error code when you try to copy files to a memory stick. I'll certainly try and help you get the problem solved. However, until we start could you give us some more information?

  1. when the last time you were able to copy files to the memory stick without any problem?

  2. you have any security program installed on the computer?

  3. are you aware of any recent software or hardware on the computer changes?

  You can download and install the package of the article and check if it helps. If the problem persists, you can start the computer in a clean boot State, and then try to copy the files. Clean boot helps eliminate any conflict of third party software.

  Note: Once the diagnosis is made, follow step 3 of section to configure the computer to start the Normal start.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• BlackBerry smartphone how to copy files from the PC to BB

  How to copy files from the computer to the BlackBerry 9700?  I have a couple of Word and Excel files, I like to keep it with me on the BB.

  Thank you.  I didn't know that I had to hit edit.  I have never when I had my iPaq.

• Copy a file from one computer to another

  Hi all

  I am trying to copy a file from a computer (where I program CVI) to another computer on the same network. How do I do? Can I use library functions plug supplied by C or y at - it of the other libraries available in labwindows?

  Thank you

  Kanu

  CopyFile () in the library of the utility accepts UNC paths, so you can do something like this:

  CopyFile ("MyFile.txt", "\\\remotePC\\remoteFolder\\myfile.txt");

  Avoid conflicts between this function and the corresponding Windows API function with the same name: read the online help for explanations.

  Simpler is better, don't you think?

• I m a new user of macbook. I can´t copy files from my mac to an external drive

  I can´t copy files from my mac to an external hard drive.

  I followed the instructions in the help, but I can't change the license to write / read of read-only, the locking doesn´t appear on my screen of inf.

  really I m very disappointed with this machine because I can´t find the apple online support.

  I tried searching you tobe to the google search, and I can't do it!

  any body can help me please?

  Select the drive in the Finder and select the get info in the file menu.

  If it is the Windows NT file system format, install software such as Paragon NTFS on the computer or reformat the hard disk.

  If it's in a different format, choose Utilities in the Finder Go menu, open disk utility and use the repair disk function or first aid in this regard.

  (143023)

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• Cannot copy files from HD to CD by using wizard.

  Original title: not accessible - incorrect function.

  Cannot copy files from HD to CD by using wizard. Have been able to do for a long time. Without warning is no longer possible.

  Hello

  The format of the files you want to copy basically described what kind of files they are. Word documents, of .mpg, jpeg, etc.
  However, it seems that the problem is with the drive itself, not individual files.

  You happen to have any installed Roxio program? Specifically, Roxio Easy CD Creator?
  If so, you should remove this program, restart the computer and try again.
  I hope this helps!

• I need to copy files from my USB DRIVE to the vmserver running RHEL 5

  I need to copy files from my USB DRIVE to the VMSERVER running RHEL 5

  I can tether the drive to my host, but my VMserver does not see the drive.

  Is there some way to copy files from to the VMserver USBDISK create through vSphere, ESXi

  bndwork

  Moved to VMware Server------General questions forum.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• How can I copy files from project Waveburner to another internal drive?

  How can I copy files from project Waveburner to another internal drive without losing the connection to the files audio orig.?

  Thank you for your time,

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• Can I transfer files from my computer to the iphone doc

  Can I transfer files from my computer to the iphone doc? If so, how?

  Thank you!

  iCloud drive. But you can transfer files that are supported by an installed application. If you mean specifically MS Word documents, you must install MS Office for iOS.

• I'm unable to copy files from an iMac on external hard drive

  I'm unable to copy files from an iMac to external drive which is formatted in NTFS, but the same external drive works in two ways on my MacBook Pro! I have Paragon NTFS installed on the macbook pro and iMac, should not too external drive work on my iMac in both directions. Can not understand what is happening

  You are running the same version of Mac OS x on a Mac?

• I deleted some files from my computer in win 7, that it is not in the recyclebin what to do

  I deleted some files from my computer in win 7, it is not in the recyclebin what to do? How do new pls help me

  Try this tool.
   
  Recuva
  http://www.Piriform.com/Recuva

• How can I copy files from my top of counter to my flash drive

  I do not remember how can I copy files from my top of counter to my flash drive. can someone remind me of the process. thanx

  Plug it in, select the file/s and then to the right of the mouse / send to

• Im trying to delete a file from my computer...

  Im trying to delete a file from my computer to free up space sum but when I go to delete it is impossible to delete the file "C:\6ace0ee039abdce9ea240" said. Nothings lock or something. So I don't know what can someone give me an overview of sum?

  This is most likely a temporary file created by a security or other Windows update.  Restart the PC and see if you can delete it then.  If this isn't the case, then you may want to assess the question to seize the property and removing against evil, it could cause if it isn't a vestige.  In addition, he is unlikely to win a significant amount of disk space, clean as you do only puts off the coast of the inevitable hard drive upgrade - if the drive is full, get a larger.