Copy objects to their own single layer?

Similar Questions

• rotate multiple objects on their own central axis

  Try to rotate several objects on their own central axis at the same time.

  a great moment of sleep would be to be able to select all, then select the rotation tool and option to rotate on own axis, so instead of all the objects revolving around a central point, they all turn on their central axis... big time saver for me if it is possible, its very useful for me with things like , twigs, leaves, grass, many other forms where I want Angel them all in another direction but only rotate on its axis not around a point swing...

  Command-option-shift-D

• Avoid to group all the objects in different layers into a single layer

  When I group objects to different layers, they all end up in single layer... I have a slight memory of what it is possible to the group object without affecting the layers... maybe a setting?

  Vincent,

  Crossposting: I was the addition of the procedure (which I posted accidentally before finishing).

  Here's the Bill:

  But you can create a selection across layers as follows, using the drop down selection:

  Select objects, then > Save selection, selection of a name;

  After that, the choice is displayed at the bottom of the drop-down list selection, available for selection (sorry)

• Should I apply a single to several L2L VPN VPN filter, or each VPN tunnel have their own VPN on an ASA filter?

  Currently, I am trying to decide if what VPN creation filters, if I just create one and apply to multiple VPN tunnels or if each must have their own VPN tunnel filter VPN. Creating a VPN filter for each VPN tunnel seems like extra work but do not know if this is the best choice. I looked through the documentation, but they never mention the VPN application filters to several tunnels.

  Hello Jork,

  If you add filters for each VPN tunnel group, it will be more work, but at the same, you will have more control over the external users trying to connect to your network.

  I would say that you have different groups tunnel (each of them will have their own funcionallity) therefore its depends on what you're trying to implement.

  If the people who are going to use X tunnel-group are the same as those who use the tunnel-group is then you can use the same than that.

  I hope I understood your question.

  Kind regards.

  Julio

  M Note all the useful po

• a single page but with 3 endings containing their own buttons

  I have a form on a page that is used for 3 purposes.
  Edit, create, and restore.
  Each of these 3 have their own buttons. So if I want to go to the edit page, I see the button change and I don't want to see Create or restore buttons.
  How can I do this?
  Thank you.

  Hello

  Set a condition on these buttons, according to the other thing (as a value in your form or session).

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

  You can assign this answer to your question in marking it as useful or Correct ;-)

• How can I set up two e-mail accounts with their own address book from Thunderbird?

  I have two people with a new office of 8.1 to win that they share. Everyone has their own email accounts. I installed Thunderbird on their old XP desktop, created their accounts and copied the profile of Thunderbird in the XP box to the new box of 8.1. Both accounts have been set up in Thunderbird, including the default accounts of Outlook Express WAB address book. The second individual had their own unique AddressBook in OE and wants its own address book (not a mailing list) when she wrote and email. In the Thunderbird AddressBook in the 8.1 box, I created a new address book for each of them. How import the WAB OE unique that I exported from OE in every address book unique individuals in Thunderbird?

  I don't know much about the WAB files, then try this: https://support.mozilla.org/en-US/questions/989835

  Now, that, if it works, allows to import address books.

  Your next question is multiple users.

  Thunderbird is designed around the assumption that, at any time unique, a BONE fide user is recorded in the computer and will have their own profile. Thus, each user has his own user account (in the operating system) and each will have its own personal records, including their profile of Thunderbird. Everyone will see only their own message box and their own address book.

  There is no support in Thunderbird to distinguish different users. It is based on the profile appropriate being on hand.

  If your two users don't mind seen each and other books addresses, then you can import them both. It won't be easy to stop one user to accidentally pull Contacts from the address book on the other.

  You have anticipated the situation by creating separate address books to the front. In practice, you will create new address books when you import CSV files. But you can leave it as it is and drag and drop Contacts from imported address books to where you want later.

• background blue homepage, but let Web sites to define their own?

  How to make my homepage (v11) centered on the left of the image, I use and blue background color. AND Web pages always put their own background colors?

  This is a new feature in Firefox 11 + to display a single image centered with a nearly black background.

  It is added by this stylesheet:

  • Resource://GRE/RES/TopLevelImageDocument.CSS

  You can watch this extension to set your favorite background color and remove the centering.

  • Old Style of default Image: https://addons.mozilla.org/firefox/addon/old-default-image-style/

  See also this thread from the forum for a solution with userContent.css:

  • [923127/questions/923127]
  • http://userstyles.org/styles/58710/Firefox-11-change-image-view-background
  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2443535

• How can I buy Photo shop so that I can re-branded to Member of the team with their own username and password

  I would buy Photo shop and have it show that I can assign to a member of the team with their own username and password. I bought it once before, and it would allow only the administrator user name and password to access. would it be controlled by the cloud team account so that I can assign to a user and have all my products Adobe controlled by a single account. Photo shop will be for a single user.

  Thank you

  Doug

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

  -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

• How to flatten a single layer in photosop by using a script (js reference)?

  I see a lot of script using activeDocument.flatten () but I need to know hot to flatten a single layer

  activeDocument.layers [3] for example.

  Thanks in advance

  I'm usign cc2014 ps by the way

  Hi Matias,

  you're right - the layer names are not unique. Here is a version using the ID of the layer:

  function rasterizeLayerByID (id) {
    var s = function(str) { return app.stringIDToTypeID(str) }
    var d = new ActionDescriptor();
    var r = new ActionReference();
    r.putIdentifier(s('layer'), id);
    d.putReference(s('target'), r);
    executeAction(s('rasterizeLayer'), d, DialogModes.NO);
  }
  

  (Both id and name) should work with smart and other objects.

  Best,

  Davide

• Taskflow Rollback is the origin of the display objects clear their cache

  We use JDeveloper 11.1.2.4 and JHS 11.1.2.4.  Application modules are derived from JhsApplicationModuleImpl.  It seems that the session of preparation is getDBTransaction () .setClearCacheOnRollback (false);

  We have a taskflow for pop up containing a backup and Cancel button more dynamic content region.  The idea is that the backup will call back activity that performs validation.  This will also close the pop-up window.  The Cancel button is similar to the record button, but the return of the activity will end the transaction with a rollback.  This seems to notify all objects in consultation: to deliver a restoration.  This causes each view object clear their cache, and then rerun the query. However, when the cancellation occurs, it causes all active views to be erased and updated.  There is a performance problem because all user data, module, menu and permission of JHS are updated.

  I also tried to use savepoints taskflow and observed the same behavior.

  It seems that the setClearCacheOnRollback may not be glued to or support has changed.

  I can also look at doing something different, but this seems to be a little problem with the extensions of JHS and / or ADF.  My other thing involves a managed bean that can invoke the effective cancellation of the view in question object.

  
  Thank you

  BradW

  Brad,

  The best way to solve this is to change the scope of control of data isolated for popup workflow group.

  In this way the workflow gets its own am instance and will only restore their own data.

  Steven Davelaar,

  JHeadstart team

• Script: A single layer to set the opacity of the other layers?

  Hello

  I have a lot of layers in my computer whose name begins with "POINTER_".

  I need these layers to falter at the same time.

  But I can't the subcomp or use stencil alpha.

  I don't know that it is possible to make a script on an adjustment layer that would do just that.

  All he needs to do is to allow me to make keyframes this adjustment layer opacity associated then with the opacity of each layer starting by 'POINTER_ '.

  I'm not a guy of script, so it would be great if someone could show me how to do this.

  Thank you very much!

  see you soon,

  Chris

  You don't need a script to do this; you need an expression.

  You can easily bind properties between layers with expressions. In this case, you apply an effect cursor Expression to your layer zero (or just use the property opacity of an adjustment layer). ALT-click on the opacity for one of your layers property then use the pick whip to choose cursor effect or the property opacity of your layer of control. Now, when you change the value of a single layer, the others follow. You can copy and paste the expression resulting from your icon from selection for the other layers. (You can even choose to copy expression only and then paste that to the rest of the layers).

• How can I make several quiz with their own slides of results within a project of 7 Captivate?

  7 to Captivate a project I want to create multiple quizzes with their own results slide.

  Currently I have 5 Quiz that all are related to 1 result slide.

  Is there a way to give each set of questions their own slide of results?

  (I saw an answer to a similar question for Captivate 5 of 2012, but I could very much use out and I thought there was an easier way in Captivate 7).

  Any help would be appreciated!

  Thank you!

  You can use an interactive object (button, click box, form) and the command 'Open URL of file' and point to the cptx file. It is important that you keep all the files in the same folder and the path to the parent of the file. Publication, same scenario: keep everything in the same folder when downloading. CP stands to be linked SWF.

  Lilybiri

• One explains what is happening in their own country when we declare a variable as [bindable]

  One explains what is happening in their own country when we declare a variable as [bindable]

  It makes the getters and setters.  In the setter, it distributes a PropertyChangeEvent.  If you want to see the generated code, add '- keep - generated-actionscript = true' to your compiler options.  Here is an example of a part of my code when I include the option above.

  /*
  * wrapper bindable generated for the property (public) includeElite
  * - generated setter
  * - generated getter
  * - original public var 'includeElite' moved to '_73901365includeElite '.
  */

  [Bindable (= "propertyChange" event)]
  public function get includeElite (): Boolean
  {
  return this ._73901365includeElite;
  }

  public function set includeElite(value:Boolean):void
  {
  var oldValue:Object = this ._73901365includeElite;
  If (oldValue! == value)
  {
  This ._73901365includeElite = value;
  If (this.hasEventListener ("propertyChange"))
  this.dispatchEvent (mx.events.PropertyChangeEvent.createUpdateEvent (Thi, "includeElite", oldValue, value));
  }
  }

• Executable FND deleted on their own!

  Hi all
  
  It is a unique question I've ever faced and came on!
  
  On my Production Server, executable FND FNDFS, CONCSUN, FNDSM and FNDCRM get deleted on their own.
  
  I have to copy from my DR server and recreate a link to the executable file in order to maintain the work of the application.
  
  
  Anyone has any idea on this subject,
  
  Anchorage

  Yes I run the utility of adadmin for the compilation of the disabled and also to link the executable FND.

  Why adadmin will delete all files? Can you please help me understand this!

  Looks like adadmin haven't run successfully the last time and this explains why these files are missing. When you run adadmin to recreate a link to executable files, it deletes the files first (using the rm command) before the restoration of the links, so if adadmin failed to repeat these files, you would not find. A possible reason why adadmin could not repeat these files is that you are trying to repeat the executables FND application services while are rising and running. To confirm this, please see the log file.

• Why a strange alphabet does not appear when I type in an address box. Integration is slow and hesitant and numbers and letters are often repeated on their own?

  I use the new Sierra, but the problem predates this.

  Whenever I am typing a command or an address, a strange alphabet appears with blue letters and numbers below. The stalls, insertion and numbers and letters and then repeat on their own. I can't get out.

  This problem comes and goes, no real reason for when it happens.

  It happens when I type in the Web addresses, etc., and when I type the commands of the operating system.

  Can you give more information on mac hardware.

  You can download and run the latest version 3.0.5 of Etrecheck (etrecheck.com)

  and post it here please.