Correct way to pushScreen and not old screens...?

Similar Questions

• Test test. I noticed that my real name and not my screen name. What name post me so much that you see?

  Test test. I noticed that my real name and not my screen name. What name post me so much that you see?

  You are the only person who can see your real name (and the administrators of the site of course, they have access to everything). I see "SixSigmaGuy", like all the other 'normal' users on this site. Moderators even see your real name. You can check this by copying the URL in this thread, disconnect and then paste this URL in your browser.

• Color calibrator may not work correctly, because the display does not fill screen.

  I have a Thinkpad W520 with 1920 x 1080 HD display and the color sensor. I tried to run the color standard application but always, she will work until the end but cannot process measures. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be seen by the sensor is not full screen, thus preventing the color measurement sensor. How can I set the graphics so that this application is displayed full-screen when executing? Thank you.

  Yes. But I just solved the problem. I set my display to display the text, icons, etc., to 150% of normal resolution. Somehow, he was causing the application displays only a partial screen. I set the magnification to 125% and now the standard color works very well.

• Is there a correct way to stop and restart VMware HA & FT?

  I do something wrong here. What is the right way to stop?

  My VMware defined configuration:

  4 x server R710 (hosts)

  4 x 6248 switches

  1 x MD3000i SAN

  1 x 2950 vCenter

  =============

  4 x guest operating system

  =============

  ESX 4.0.0 U3

  Here are the steps I have to set everything stop.

  1. Stop all the guest operating system
     
  2. Disable the FT of virtual machines
     
  3. Set the Mode of maintenance on all hosts
     
  4. Right-click on each host (R710) and click on stop
     
  5. Stop the vCenter
     
  6. Wait 5 minutes, then turn off the SAN (MD3000i)
     
  7. Power Off the four switches
     

  To restart the game from VMware, I did the following:

  1. Powered on the four switches (wait 2 minutes to go to the next step)
     
  2. Powered on the SAN (wait 5 minutes go to the next step)
     
  3. Powered on the vCenter
     
  4. Open the Dell disk storage manager to see if the SAN is on an Optimal State
     
  5. Powered on the hosts (R710)
     
  6. Go to vCenter
     
  7. the four hosts have yellow dots. Something HA agent is disabled.
     
  8. The I had to disable the check box HA and then re-checked in order to allow the system to reconfigure the AP to the four hosts status normal and ready to be used.
     
  9. Turn on all the feet on each virtual machine
     
  10. Powered on the guest operating system
      

  The second question here is the time of the host, I went to the time setting and the time and Date will not. It was 4 hours off. The time is set to synchronize with my DNS server. Whence this difference of 4 hours guests?

  In summary

  To solve these two problems, you must do the following

  1. see your VC is already a DNS server, set the ESXi hosts to use the Victoria Cross as their main DNS and the virtual as secondary.

  2 configure your VC as an NTP server and point the guests to use.

  If you want to change the host file, you have to set the IP address, host name, domain FULL name

  Example:

  10.10.10.10 Esxihost01 Esxihost01.domain.com

  But rather to use DNS

  Don't forget to assign points

• I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I'm not

  I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?

  Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?

• Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

  Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

  CS6 and below: How to access the features of Arabic and Hebrew in Photoshop CS6 - YouTube

  Creative cloud. CC to CC 2015:

  First install the value in the parameter of English/Arabic language: change the language setting of your Cloud Creative applications

  Then enable Middle Eastern features in Photoshop: How to write in Arabic in Photoshop CC (and other adobe programs)

  I would like to know if it works.

  Gene

• I can't install the new program in my laptop and delete old programs, get the error message "windows service install is not installed correctly.

  I have problem with installer in windows vista, I can not install the new program in my laptop and delete old programs.

  I can't update windows vista.

  Help me fix my laptop.

  Solve the problem. I reinstal windows vista, I have install microsoft security, I don't use antivirus hid the dangerous virus. I use more cnet.com is very dangerous.

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• How is - this hard I can reset my iPhone 5 with the broken home button and the touch screen is not responding.

  My iPhone 5, iOS 9.0.2 does not respond to touch. (broken touchscreen) and my home button is broken. my battery is fully charged so that it would take too long to wait until it turns off. I need a way to Hard reset it without a button at home and the touch screen. I know there are 3rd party apps that could do this, but I can't open my phone (no password protection) to 'trust' on this computer. If there are applications that could work around this? Any help is appreciated.

  There is no way to do it. You have 2 hardware problems. Time to replace the phone.

• Windows Update offers me a few old updates, is there a way to track and organize the installation of update history?

  Original title: update windows

  I am regularly offered 'old' updates for installation, for example, KB2487367 published 05/08/2011. Is it possible to copy my Windows Update history file to an Excel file? I could then sort by number of update and avoid download/installation of the old updates. Or better yet, is there a historic Windows Update file that is already sorted by number of update?

  Yes, it was installed successfully (according to the history of the update). No indication that it was available on resetting for several days. I went through my entire history of update to see if/when it has been previously installed. It is not a major concern for download and install. Am I better turn off just the download of 'important' updates offered by Microsoft? He done wrong to "re-download"?

  If you install, you may need it.  You only * need * to install critical / security updates really.
   
  If the update installs correctly and not is not offered on several occasions "burst" - there is no harm in just letting Windows Update just "doing his thing"...

• I recently installed the trial Adobe XI and end of the trial period, so I wanted to revert to the version that I already had. I didn't know any uninstall feature and my old version is apparently replaced by the trial version. I can not re - install

  I recently installed the trial Adobe XI and end of the trial period, so I wanted to revert to the version that I already had. I didn't know any uninstall feature and my old version is apparently replaced by the trial version. I can not re - install a version previous b/c I need a product Id (God alone knows where it is now) and a way to uninstall the trial. Any ideas?

  When you installed the trial, it should have been an option for ignoring your current installation and let. Apparently you skipped this case. To uninstall the trial (in Windows) go to control panel > programs and features and select XI Acrobat and choose uninstall. After uninstallation, run http://labs.adobe.com/downloads/acrobatcleaner.html to clean your system. HOWEVER, if you see your old Acrobat in this window, do not run the vacuum cleaner, but do a repair on the old version.

  You did not mention the old version you had. You could try http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. With respect to S/N, you should have the registry and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.

  Be sure to save any download of the old Installer and the S/N for CD or HD backup for future use. They will likely not be available.

• How to open a window of firefox without tabs or the toolbars and the FULL SCREEN NOT

  I have a favorite site I want to use it as a desktop application, but not full screen. I want to not have any toolbars, tabs, address bar, etc.. Is this possible?

  Hello

  I tried this extension and it seems to do what you want:

  • https://addons.Mozilla.org/en-us/Firefox/addon/fullscreen-toolbar-hover/

  You can change the options for the extension in your modules page, either:

  • Enter Subject: addons in the address bar and go to the Extensions tab, or
  • Go to tools (or

    

    ) > Addons > Extensions

  Don't forget to hide your title bar, if you want that web page to reach the top of your screen. If you don't know how, go to the personalization page by:

  • Enter topic: customization of in the address bar, or
  • Right click on your toolbar and select "Customize".
  • On the point of

    

    > Customize

  In the lower left corner of the page should have a button 'Title Bar', clicking on it shows/hides the title bar.

• fullscreen is not full screen, unless I use "expand" and later goes back

  I used to be able rely on full screen and it would be nice, and when I closed ff, after reboot it will re-start in fullscreen. Something a gliched. When I press on full screen in regular format, mode full screen is not complete, only about 90-95% of the screen. I can make it go full screen if I click
  "expand" and then full screen, but if, at any time, the screen is not expanded, the same thing happens. If I close enlarged and full screen
  It opens with the reduction in full screen. I can't move or stretch out in anything except the normal screen, and even once, I click on full screen. I never had this problem.

  Believe it or not, after a week of uninstalling, reinstalling, verification of configurations, I simply décliqués menu toolbar, and now it works perfectly regular, maximize and full screen. Go figure. Thanks to your efforts, people.

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.