Could not import the Reader Extensions certificate

Similar Questions

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the chained certificates.

  Hello!

  I'm trying 2 import certificates. One is root (appeal certificate name issuer.pem), and the other is signed by the root (let's call it intermediate.pem).

  Issuer.PEM-

  BEGIN CERTIFICATE-----

  MIIFKDCCAxACCQCC7BPV + 4sWeDANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJB
  VTETMBEGA1UECAwKU29tZS1TdGF0ZTEPMA0GA1UECgwGaXNzdWVyMRAwDgYDVQQL
  DAdzaWduaW5nMQ8wDQYDVQQDDAZpc3N1ZXIwHhcNMTQxMDEwMTYxMjE1WhcNMTUx
  MDEwMTYxMjE1WjBWMQswCQYDVQQGEwJBVTETMBEGA1UECAwKU29tZS1TdGF0ZTEP
  MA0GA1UECgwGaXNzdWVyMRAwDgYDVQQLDAdzaWduaW5nMQ8wDQYDVQQDDAZpc3N1
  ZXIwggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoICAQC8JTUuI6DkndeSOolE
  + RlJmdXGqPyS + nyPV/99SI8OsC/Q5iBnZLF0YB + vOMyVa7Dv5dDvn/2ixaOvcO35
  i3jfpv008Z0s8UxEMotZPE/FXU9zLq5xwEmxixyze839bZr9R35G0IzeihhBz5si
  HIFJB9UgXTmj67cMOzjaUJoOXGmTJv4IjHiIAq0Fr3v + TmFsSJ3uK95pHlPr1tix
  1PM4U26R68/XCKYw4DRlwA21t8hSSOXB2hiRq55ztrG + k4KSNSgfPBEXGzZ2n + Ir
  ooDYrA7YXsAzDyn3rB3D2pnnADhYEdZ7js4zmurKozV6gY7Mb3tWQXewqYK0njNM
  oUD/ecV8wcSmaxaseelhmX + wce7YFUfdqDPgZ + 5amdtoE5P4vo2jSfTEWzLF + MFx
  pHZ5I22uaG0uctXJwUwTxZH4sRGC6V5Mrnx8x8nF6U15FovSbfP813kld3ftCI23
  6S0XY9mex4Z8d8sOTLq6XBo/pkVXYlVreymGcnL9jUqzKTpYcBtoyW7uNKrIPKtU
  S5oeb37o8x, nWIJvU5mCo0RuFw8BkpXGfg, rZXx4AX1k, MUI-oFxg1URHRgF-cf0
  DSWRW2XkxFxk7GTEMM0XKanilgzc5IiaxQ8JZh0InOpjZO7DFfsWzsqbt2sjm98Y
  Fad8n9OgmfyAgsmSPtRERrV + bQIDAQABMA0GCSqGSIb3DQEBBQUAA4ICAQBUfBSI
  EFDb1rVxItjiioLeXppYwOKvdtpZS8tslv82HP0honJj/0V + 3d0hZblD/RHlFMC8
  w2FVheNeYWWQLnRvC9ZXfU2TuOYb80ek8NVgSOHI42IuxByEb2XKU7yaqYDWiRAD
  nIkNA9okNAXkDm57Hl8b5q9vEWcVT3wdstfHTg7M16bWsG05BUqhIJn7ODTCkReS
  HTyctxLKShTJJpxrTA3syqIaH8vAcn7ZXA3irMslNKY19Jcw7ZVAclVkk9LVtt/M
  MwuWfVw5adtOfDH/SisLfQEfX6ZaNPmfSduQ9maY5 + hZFSiCsGdD0SsnTNQF6qiJ
  1C1P3Co53CBJBZ8raouHOr5edaO2kmnulx5ZwBAI3y5b5FXYkKfiDdruubF9dQbH
  MUoPfSQsfBdqzn9oRmZONfVlMFHhR7qSIFjpzXsPWISY8o0fOkc8HeXxuvOW9Hdz
  RTFsrOVy / UYm4igkMU8 + FyFo9ov3sLOEk4pyQT7nGAlCEtufiFlsJMvJ8V23kSYB
  gqhv5v4TTvhNQVX5z + sOpeLznS8MseWzv4oPAsYYDS9iKsOG3IVCEDccbKHD79nP
  5OXdd6Wrrdi6 + vgJ in us / hyUynuUBeslT7h4mx0dtpHWdg5SAoZU6q / + J866TGiPJ0
  NgZX4Lkd5imY + kzZSXqKvP + 70zdFmJvx/gvEZg is

  CERTIFICATE OF END-

  Intermediate.PEM-

  BEGIN CERTIFICATE-----

  MIIFOTCCAyECCQDZCX + QdnE1ajANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJB
  VTETMBEGA1UECAwKU29tZS1TdGF0ZTEPMA0GA1UECgwGaXNzdWVyMRAwDgYDVQQL
  DAdzaWduaW5nMQ8wDQYDVQQDDAZpc3N1ZXIwHhcNMTQxMDEwMTYxMjI5WhcNMTUx
  MDA1MTYxMjI5WjBnMQswCQYDVQQGEwJBVTETMBEGA1UECAwKU29tZS1TdGF0ZTEV
  MBMGA1UECgwMaW50ZXJtZWRpYXRlMRUwEwYDVQQLDAxpbnRlcm1lZGlhdGUxFTAT
  BgNVBAMMDGludGVybWVkaWF0ZTCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoC
  ggIBALGh2FcTbld22gGQqgzh2a27NEKoN795kG5zTOQuRjHPH7XIA8FBSgCF + 9ZK
  7ODhBBL2txABeYFWv6g8PVdeIr4uZdKQ8g2pap4 + 8v5Vpky1DiPGoWyV7e7yFUdK
  sNtfoHA3KVewQ0PZZAHFFQO6atePu3hKcRlyOtbIYO3TtQTM3utCXZFuJpn0mqsG
  CRO5l + NErzrFf3rfzK8Ko/ENtSxl2tb9gMJApG0NBjcHxvvhm7ZEWgkLs91XDFOq
  z10Tm8XW2BIPTeDH/SW1cCZ2vZ2HbmRePgoyhNb9aR4ciTDkfFWe8tR6z2F2g9KB
  PYXVgdqvSaYfR6bGzUKU25lehaqrDBcVUjfZiJGVB6EhTZBb + / hCTQ9y/y6uEFjZ
  JUVlcetcTmPQvEO64lOAb79UE9P14QJ + 1CQRlnyQgWnOLsQ7nWgCX9 + ULx5UZnXD
  DhyeNGJ1U9hN7jDfunTsnIHz30dv6lXhXy5Ne1OdmM0zVI5BzuwMjvIgpXyAijiO
  kackqfqZFxTAAfMioVsj0vpUAM6GeBTlagPAIDn0h + QJU6X38xJNWwa9/Q3bn52d
  zuAJ/0Ejc9GRWzXsau/Ht9dwdZjWrdmM1nURtju9E3Q3VfUEYo3kwIKIzyVFavN0
  + NIaiY7ZM3zIMEk9gMqa0S5EcA6gktCQG3Vi2M0iLCTVS + dpAgMBAAEwDQYJKoZI
  hvcNAQEFBQADggIBAK1E6K2DapEJt8gI0De8L/MgwIuUA4Ox2SlGsOWyD4owYkev
  hEmPaQj96/gkxXE7MMrEytuSbHi9/yTe5DsEH + X56nuJk5exawaxAlB/5zoCnTRQ
  diZNlc5Sb8XZjlg33CZs8AQNqNUcPn6fo1T0hltgMnEUYdRclDMNYbNc3QNWeeKN
  RP80WTQWmCKBuff9QHnlWDicBlOSlXkcupqtc/kl2dwBGSdNOdFWCyHabzqoErEF
  vxQRMGDzhpmJV8T8VeksW9QThlCOOSiI7yxecVvD/I0xlFEOFjwgIn7nNJMDsEmy
  wNS, puKrFg7ge, E6aGJH3kgEPf9pr52kuRUoLEUacR6AuLjKDqOyi, ZdYcJj4omg
  EgW2Dowrs3w5xoiJ + 5GKIHUsVjZZwIrgi9Ies3NnfYXv + VE2gGavRC0kxZ3 + Ls + z
  Cb9mbB4dqdiByBboSciPH/rzRF8KZo/L1czwM4WQ + FxpE / yCBM2Dn7MumSacF07T
  M9yhUzHkqx83LwObxt9udhV6A4nuiMhU3db9Qmlizqn5dHsnNcrLha0In-iKJ/7 t
  XB + U + Sl82x4goTcfzYRMQdaJe9sxy3Co5gMh13dVU062UPoZwq + 9O0suooYaGfhD
  uZ8ljVJ9/jbtatyo4KP4Q4VFtR5DoCQhGgAe1z9p5A3t3vmk3PgoSwCzw7c4

  CERTIFICATE OF END-

  As you can see that these certificates are chained-

  OpenSSL verify CAfile - intermediate.pem issuer.pem
  Intermediate.PEM: OK

  However, after the importation of the issuer.pem, when I try to import intermediate.pem, FF gives.

  "Is not a certificate authority certificate, so it cannot be imported into the list of certificate authority."

  I have no idea what you're up to, but if these two certificates are supposed to be Cert CA, none of them have defined appropriate extension:

  X509v3 extensions:

  X509v3 Basic Constraints:
   CA:TRUE
  

  It is advisable to also specify a Point of Distribution CRL or an OCSP URL.
  If I issue certs today, I wouldn't pick 256 as hash algorithm SHA - 2, SHA - 1.

• Could not import the certificate - you can solve it here

  Hi all

  seems that I'm having a similar problem:

  Re: Error - failed to import the certificate - you can fix this here

  My gap phone signature keys worked a few months - now my key says iOS:

  "Error - failed to import the certificate - you can fix this here" when I Isaiah to compile app

  I find this part a bit confused so please use no baby...

  -I went to https://developer.apple.com/account/ios/certificate/distribution

  and it looks like my prod. CERT and mobile profile available are both still active

  -J' tried to re - download these that have been saved on my computer when I them - go back to the generation gap phone - and he accepted them with my pass

  - then I opened a new I just did-, but has the same problem when I try to build a production application = "error - failed to import the certificate - you can fix that here."

  Q: what should I do to fix this?

  R: remove the CERT in my keychain and their construction everything again from scratch?

  B: should I remove the ACTIVE apple certs and profile mobile available?

  C: something simpler to solve this problem?

  Thanks in advance - Dave

  Should be fixed now.  It seems that you have found a server in our collection that was generations before it was supplied.  Sorry for the inconvenience.

• Could not import the Clipboard because an unexpected end of file was encountered.

  This one is particularly annoying.  I use Creative Suite 2, Photoshop

  with Windows XP Pro.  I have the latest updates.

  When I open Photoshop, I constantly have the message "couldn't".

  import the Clipboard being an unexpected end of file

  met. "I hit [OK] and the message reappears in about 5 sec.

  I ran so much Photoshop as the first point of access on the computer (front for)

  all that is in the Clipboard) and I manually deleted the

  Clipboard.

  I have also reinstalled the CS2.

  Help, please...

  Operating instructions that can help you:

  (1) open Photoshop.

  (2) hold down 'Alt', 'Control' and 'Shift' at the same time as the launch of the program.

  (3) select the option to remove all of the current settings. All preferences and settings that you have changed will be returned to their default initial value.

  (4) close all applications and access your Photoshop plug-in folder. The location of this will depend on the version of Windows you are using. If you use a 32-bit edition, you'll find to "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins. If you use a 64-bit edition, you'll find in "C:/Program Files (x 86) / Adobe/Adobe Photoshop CS5 CS4/Plug-Ins or" or "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins.

  (5) select plug-ins not published by Adobe and follow the instructions to remove.

  (6) visit the Photoshop update page to find and apply updates for the version you are using.

  (7) relaunch Photoshop and try it.

  As alternatives could be presented...

  the http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/1486-error-message-in-psd-fi - ask questions and read the various cases of corruption of file .psd

  https://www.repairtoolbox.com/photoshoprepair.html Photoshop repair kit - one of the tools provided restoration of .psd files corrupt

• Could not import the Photoshop PSD

  It's weird. Try to import a PSD file. Message body cs6 error is "we were unable to open the file on the disk."

  The file is a fixed image that came to me as a JPG. I've read it in Photoshop cs6, cropped it, because the canvas 1920 x 1080 (to match the size of the sequence of the organism), tinkered and ended by running the action of course broadcast on this subject Luminance. Then I saved it in the body as a project folder *. PSD file. As I did hundreds of times now with dozens of projects.

  Attends agency cs6. Find the file using media browser. File... Import media browser gives me a window with the error message "We cannot open the file on the disk." Preview the Source monitor fails.

  What makes this even more frustrating, it is that the organization can find and open the file that I worked on just before this one. Same conditions, same process, same repertoire, same protections on files (I checked that). Two files seem to be exactly the same except for the file name and the content of the file. Everything else is also identical to that I can do. And none of my hard drives are even half full, so it shouldn't be a question of space.

  So if the organization can read one, why can't he read the other? And what I can do to get the Organization to behave correctly and read the file? Files do not appear to be corrupt - Photoshop can read them both very well. In any case, I've recreated the problem from the source repeatedly *.jpg file now so I think I can exclude from Photoshop file corruption on. Perhaps.

  I ruined my brain for 90 minutes trying to understand what has changed between the first file that works and one that doesn't. I came up empty. I worked on one, then the other, then imported the first on body (which worked), and then imported from the other in the body (which failed). Exact same source (both files were attachments on e-mail even *.jpg), same workflow, saved in the same directory. ARGHHHH!

  I did most of the 'usual suspects '. I left off Photoshop both body and restarted. I saved the file problem in other formats (same error no matter what format). So, I turned to Teh Google, that does not turn a large part that relates. Could not find anything in the Adobe Help documentation. So everyone here tell me what is happening?

  --

  Bruce Watson

  Few things to check - is the color of the RGB PSD Mode. It cannot be CMYK, or some other.

  I had problems with dynamic objects, because sometimes, they import all right, but not always.

  Layers of tiny (a few pixels x pixels) were causing problems.

  Adjustment layers have been known to cause problems.

  Normal layers, so long not tiny, always worked perfectly for me.

  Anything else that comes to my mind, but good luck.

  Hunt

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Could not import the DLL

  Hi all

  I am using the libsie API to open files .sie of SoMat (there is only a plugin for this data format for LabVIEW and tiara, but it does not work). I have previously imported from the dll using the wizard import with great success, but I don't ' know my way around c or c ++ so am a little confused on this one. When I try to import the attached dll (you will need to display the extension of .doc to .dll) by using the attached header file appear no calls. They are there in the header file. I wonder why that is. This is a header for the evil formattted file or is there another question?

  I have attached a copy of the zip file that I downloaded on the HBM website. There is a demo .sie in this file if you want to watch. It seems to be a fairly complete documentation on the API Web site.

  Any help or pointers gratefully received.

  Phil

  It doesn't matter what language was used to create the DLL, as long as it exports a C compatible (which does).

  If you make a copy of the header file and delete SIE_DECLARE(), leaving everything inside the brackets unchanged, of each function declaration, I think that you will be able to import at least some of the functions. I don't know how well the import utility will handle the pointer data types, you may need to modify each node in library function call to set manually after the import.

• Could not import the AVI in Movie Maker

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  ==========================================
  Since you want a DVD... have you tried DVD Maker? If the file will be
  not import... it may be worth trying to convert it to .wmv format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Could not import the digital camcorder, Kodak Zi8 videos to Windows Movie Maker

  KODAK IMPORT PROBLEMS. VIDEO TO WINDOWS MOVIE MAKER MOV CLIPS

  We took lots of video clips with our digital video camera Kodak Zi8, bought about a year ago.  Can I transfer on our computer & Watch clips from movies--the picture & sound is great.  But when I try to import into Movie Maker - so I can learn how to make movies, it won't import them.  I understand that Kodak clips are .mov & I read that Windows does not recognize the .mov - so what do we now?  I understand, there are a few 'conversion' online programs, but don't know what to use or which will solve this terrible problem.  We want to be able to enjoy our videos... Please help...

  Fix... QuickTime .mov files are not compatible
  with Movie Maker. Conversion to. WMV would be
  the best bet...

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Could not import the vcf for Contacts - Win 7

  I have a vcf file created from 3 Samsung Galaxy s.  I want to import the file into the contacts list on Win 7 (C:\Users\920040000XX7\Contacts).  I can open the vcf well, and each contact record opens in a separate dialog box that I have to "approve" and it is added to the list of the contast folder.  However, to halfway through this tedious process an error message: "Application of error in Importer DLL C:\program files\Windows Mail\wabimp.dll.

  The error does not appear in the same place in the list whenever I try to import the vcf file.  I'm puzzled.  Why is the application error that happens and how to fix or work around this problem?

  Thank you

  I can open the vcf well and each contact record opens in a separate I have "approve" dialog

  I don't know why this fault arises with your "portmanteau" VCF file There is no doubt that Contacts Windows expects the VCF files only contact, but the fact that your file is partially read indicates wab.exe knows a little how to handle.

  You may have better luck using this excellent small online utility that can convert your VCF file of multi-entry to a CSV file, ready to be used elsewhere: vCard, LDIF/CSV Converter

• Could not import the .fla files

  Good evening friends,

  I can't import the files flash adobe flash professional cs6. The message I get is:

  "One or more files could not be imported because the problem occurred during the import"

  I need quick help.

  Thank you in advance.

  Ersin

  Fortunately, that said asymmetric is not correct, as well not be what you were asking about.

  You can open any FLA of CS5.5 or later, in any version, CS5.5, or later. At this time they did the files be future-proof. New feature does not work and could lead to problems, but the file should open ok.

  But back to what you asked, you would never import a FLA, then don't means you that you try to import a SWF file? They are sovereign, there's a number of Flash Pro version where the ability to import SWF has been removed. Not sure if including CS6. Nowadays you can import SWF files, but you wouldn't get the ActionScript code.

  If the SWF file is set to be protected, then that would also lead to errors. You are much better if you can find the original Florida

• Could not import the XT10 (RAF) RAW files in Lightroom 5.7.1

  To the right,.

  
  I recently purchased Fuji XT10 camera (released in may 2015), after the shooting in RAW for a reason that the RAF files could not be imported to Lightroom 5. I updated my Lightroom 5 to the more up-to-date version 5.7.1. but still will not change a thing. I am reluctant to convert to DNG because Internet said RAF files retain better details/data to DNG.

  Someone will have a solution to this please, or if someone has the same problem?

  Thank you very much for your help!

  
  All the best,

  
  Josh

  Hello

  This camera (X-T-10, correct me if wrong) requires 6.1 Lightroom and Camera raw 9.1 devices supported by Camera Raw

  

  Please proceed to Lightroom 6 or DNG Converter allows you to convert your images to DNG

  Concerning

  ~ Assani