Could not open the drive or one of the snapshot disks it depends on.

Similar Questions

• Could not open the vmdk disk or one of the snapshot disks it depends on

  I upgraded vmware fusion 1.x to 2.08, because I was getting the message

  Cannot open disk - hard or one of the snapshot disks it depends on.

  Reason: Cannot lock the file.

  So I thought that would fix it, but it didn't. I can't figure out how to fix it either. At home, I'm a PC user and use VMware player, but at work, we use Mac OS X and the merger.

  Here ARE THE CONTENTS of my VMX file

  ____________________________________

  . Encoding = 'UTF-8 '.
  config.version = '8 '.
  virtualHW.version = "7".
  MemAllowAutoScaleDown = "FALSE".
  pciBridge0.present = 'TRUE '.
  insulation. Tools.hgfs.Disable = "FALSE".
  deploymentPlatform = "windows".
  virtualHW.productCompatibility = "hosted".
  RemoteDisplay.vnc.port = '0 '.
  Tools.Upgrade.Policy = "upgradeAtPowerCycle".
  powerType.powerOff = 'soft '.
  powerType.powerOn = 'soft '.
  powerType.suspend = 'soft '.
  powerType.reset = 'soft '.
  gui.exitonCLIHLT = 'TRUE '.
  displayName = "WindowsXP_IE7."
  NVRAM = "WindowsXP_IE7.nvram."
  memsize = "664".
  guestOS = "winxppro.
  Sound.Present = 'TRUE '.
  sound.fileName = "-1".
  Sound.AutoDetect = "TRUE".
  sound.startConnected = 'TRUE '.
  USB. Present = 'TRUE '.
  EHCI. Present = 'TRUE '.
  USB. Generic.AutoConnect = "FALSE".
  ide0:0. Present = 'TRUE '.
  ide0:0. FileName = "winxp - 000001.vmdk".
  ide0:1.present = 'TRUE '.
  ide0:1.startConnected = 'TRUE '.
  ide0:1.DeviceType = "cdrom-raw"
  ide0:1.AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.
  ethernet0. ConnectionType = "bridged".
  ethernet0.startConnected = 'TRUE '.
  ethernet0.wakeOnPcktRcv = "FALSE".
  floppy0. Present = 'TRUE '.
  floppy0.startConnected = "FALSE".
  floppy0.filetype = 'file '.
  floppy0. FileName = ' / Users/user/Library/Parallels/winxp/unattended.fdd '.
  floppy0.clientDevice = "FALSE".

  ethernet0. AddressType = 'generated '.
  UUID. Location = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  UUID. BIOS = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  extendedConfigFile = "WindowsXP_IE7.vmxf".
  ide0:0. Redo = «»
  pciBridge0.pciSlotNumber = "17".
  ethernet0.pciSlotNumber = "32".
  sound.pciSlotNumber = "33".
  ehci.pciSlotNumber = "34".
  ethernet0.generatedAddress = "00: 0C: 29.6 d: 01:00.
  ethernet0.generatedAddressOffset = '0 '.
  ide0:1.filename = "automatic detection".
  tools.syncTime = "FALSE".

  checkpoint.vmState = «»

  sharedFolder.option = "onetimeEnabled".
  sharedFolder.maxNum = '1 '.
  sharedFolder0.present = 'TRUE '.
  sharedFolder0.enabled = 'TRUE '.
  sharedFolder0.readAccess = 'TRUE '.
  sharedFolder0.writeAccess = 'TRUE '.
  sharedFolder0.hostPath = ' / users/person/SharedVMWare.
  sharedFolder0.guestName = "SharedVMWare".
  sharedFolder0.expiration = "never".

  pciBridge4.present = 'TRUE '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.pciSlotNumber = "21".
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'TRUE '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.pciSlotNumber = "22".
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'TRUE '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.pciSlotNumber = "23".
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'TRUE '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.pciSlotNumber = "24".
  pciBridge7.functions = '8 '.
  vmci0. Present = 'TRUE '.

  MKS. Enable3D = 'TRUE '.

  ethernet0.linkStatePropagation.enable = 'TRUE '.

  Marked as supposed to answer

  André

• VMDKMounter gets error "could not open the virtual disk.

  I have two Win7 x 64 virtual machines running fine with VMware Fusion 4.1.2.  I installed VMDKMounter from VMware 3.1.3 and OSXFuse 2.3.9.  I can ride one of the files hard with VMDKMounter very well, but others told "Cannot open the virtual disk" when I try to mount it.

  8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: could not parse the instant string ' / Users/finchr/Documents/VirtualMachines.localized/hoth.univ.dir.wwu.edu.vmwarevm/hoth.univ.dir.wwu.edu.vmx '. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: will not be able to take an informed decision, based on partial information. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: mount the drive read-only instead. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: failed to open the disc: disc encoding error (261993021117)

  The virtual machine that VMDKMounter fails to mount was created by VMware vCenter Converter 5.0 of a physical machine.  The virtual machine that works was created in VMware Fusion 4.

  Of course, the hard I really want to ride with VMDKMounter is he who fails.  No idea how to make so that he can get?

  Well, I see nothing in the disc DescriptorFile which prevents the hard mounted.

  So right now, you can mount other hard files, but not this one, then I have two suggestions...

  It would be to use vmware-vdiskmanager to create a new hard that will not go up and the other would create a new empty hard, then add it to a virtual machine, as well as one that will not go up and then start with appropriate optical disk or an ISO Image containing the appropriate tools/utilities in order to image the drive to the new empty.  I usually use Symantec Norton Ghost for operations like this.  Then maybe a new mounts with VMDKMounter.

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• ORA-28575: could not open the RPC connection to external procedure

  Hello

  I get the following error:

  ORA-28575: could not open the RPC connection to external procedure

  ORA-06512: at "SDE". ST_GEOMETRY_SHAPELIB_PKG', line 1325

  ORA-06512: at "SDE". ST_GEOM_UTIL', line823

  my environment:

  ORACLE 11 g 2 (11.2.0.3)

  IBM AIX 6.1

  ESRI software: ArcSDE 10.1 SP1

  Since I'm on oracle 11g release 2, I used the method of the external procedure:

  under $ORACLE_HOME/hs/admin

  in the "extproc.ora" file, I added the line

  SET EXTPROC_DLL = ANY

  and still the same problem.

  so I made the (listener and tnsnames configuration method) where that might solve the problem. However, it does not help...

  I also applied the oracle metalink 1256784.1 ID DOC

  but without success and I'm still getting this error (ORA-28575).

  After extensive troubleshooting, I discovered that this will happen in one of two situations:

  1. the external procedure library .so is corrupted.

  OR

  2. the external procedure library .so is a 32-bit... .to check that the Unix ( file lib.so), the exit command should give you 64-bit

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• When I tried to power on VM ends up in the right error: the specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  I stop a virtual machine after a certain time, I tried to power. Its has ended up in the following error message

  Reason: The specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  The machine was working fine before the closure.

  In the data store, the file type of the virtual machine is 'file' instead of 'virtual drive '.

  Help, please

  You are missing the file descriptor hard. The xxxx - flat hard is the file that contains the data effectively. But the xxxx.vmdk is missing, which is a text file that connects to the flat file.

  AWo

• Could not open the virtual machine

  I used the customer convertor to create this virtual machine from one which works well on ESxi.  When I try to open on Win7-64 machines running vmplayer 3.1.4 I get the following error:

  Could not open the virtual machine: file "D:\Data\VM Machines\WW S2008_32\WW S2008_32.vmx 10_1 10_1" line 1: syntax error.

  Any ideas?

  "" "WW 10_1 S2008_32.vmx.zip" attached file contains the "WW 10_1 S2008_32.vmx" file created under VMware Player 3.1.4 and was then modified to reflect the values of parameter that you might want to stay the same as uuid etc.  Start VMware Player and then check the settings before running the virtual machine.

• IE7 "could not open the file: * path *.» The file exists may not

  I created a package of IE7 a while back which works great.  Apart from this little problem.  It generates an error when the user tries to open a .msg to the WebApp.  It will try to open Outlook and display the following error message.  «Could not open the file: * path *.»  The file exists may not, you don't have permission to open it, or it may be open in another program.  Right click on the folder that contains the file, and then click action to check your permissions for the folder. »

  All the other files attached to work.  PDF, html, txt, rtf, etc.  I tried to move temporary Internet files to a different location with the same result.

  Someone at - it ideas?

  Thank you!

  He was captured on Windows Server 2003 x 64 running on W7 x 64

  Also note that when users choose to save him, it opens fine.  This isn't an "acceptable workaround solution.

  Looks a lot like this one: http://blogs.vmware.com/thinapp/2011/01/locally-installed-applications-and-integration-with-virtualized-internet-explorer.html

• ORA-28575: could not open the RPC connection to the external procedure agent

  Hello world
  
  Could you please help me with this problem? I am trying to configure Oracle XE 11 g for external procedures, this because I need to access certain procedures in a DLL in Delphi 6.0, but even with the simplest of the dll that I do, as a sum in C, I can't pass this ORA-28575 error: could not open the RPC connection to the external procedure agent.
  
  It's my listener.ora:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  )
  )
  
  
  DEFAULT_SERVICE_LISTENER = (XE)
  
  and that's my tnsnames.ora:
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Do you know what could be the problem? I'm out of ideas and google search...
  
  Also, is there a difference in a call to a DLL in VB and one made in Delphi?
  
  Thank you and best regards,

  See the MOS NOTES:
  ORA-28575: cannot open connection to RPC if "ORA_EXTPROC_THREADED" is set in the registry [945396.1 ID]
  External procedures - troubleshooting errors ORA-28575 [70638.1 ID]