Could use a simple tutorial on speed c. the intensity of the signal

Similar Questions

• Can't do a TV picture on my HP 2006 Media edition by using my cable coaxial antenna, I split the signal out that works well with ordinary TV

  I am in a rural area of the United States and have an antenna connected to a digital box with a signal strength of 73% to my regular TV on which I get 16 channels.  The radio works fine in the Media center, but I can't get the TV stations.  I have divided the coaxial antenna power and connected it to the coaxial video on the back of the CPU.  I have a 64 x 2 dual core AMD Athlon {tm} processor 4200 +.   When I get to the media center TV auto configuration screen in place it scans and said then not detected no TV signal.  If I configure manually using antenna and then go to the screen "digital land" and hit next, the program stops working and although it shows it running in the Task Manager it will not give more. I guess that's because it detects no signal from the antenna.  I'm stumped and would apprectiate all opinion.  Finally, I would like to power TV live stream to my regular TV of the CPU, but going to cross this bridge after receiving a signal from TV to the CPU.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://experts.Windows.com/f/

  It will be useful.

• Calculate the speed of the target by using photoelectric sensors 2

  I use 2 photoelectric sensors mounted parallel to each other. As the target passes in front of the sensor, the signal of output voltage goes from 0V to 10V. Because I know that the distance between the sensors, I need to use the difference of rise time of the signal between the sensors to calculate speeds. I can do that when I export the data to excel, but I would do it automatically into my LabVIEW code.

  The data of my sensors are the type of waveform. I can extract the waveform (t0, dt, Y) components using 'Get waveform components' and then look for the timestamp for each value using t0, dt and index value. I need to calculate the timestamp of each sensor once the signal passes to 10V (Y = 10V). I can't extract the components of waveform for signals from sensors (seems to only be able to extract the components for a sensor) and once I extracted components, setting up my calculation of the speed. I think I need a case structure to save the timestamp, once the signal hits first 10V (if Y = 10V save timestamp; if Y = 0V continue indexing of values).

  Any suggestions on the extraction of components of form of wave or indexation of values and calculation speed are greatly appreciated! The code I wrote to collect signals is attached.

  Thank you very much

  Alberto M.

  Here is a sample of the signals of the sensor showing the difference of signal rise time.

  

  1. you must use the finished sample mode and read all samples.  To match what you have, I would use 10 k samples.  That would be 5 seconds worth of data.  This eliminates the need for the while loop and gives you the full waveforms.

  2. just use the base trigger level detection VI (in the Signal Processing-> measures of waveform-> palette of Waveform Monitoring) to get the time for every rising edge.  Then it's a simple subtraction and divide.

  

  In addition, if you want to make things even easier, you could have used a camera with a meter of A - B.  Then the meter gives you just the time difference directly.

• How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  There are many solutions. A more simple: put the text and the items colored in the back and put the 'shape' on it. Configuration of the 'shape' become transparent in a stationary state.

• Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside

  Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside the Jquery page. In the future I would also be able to add, to remove the DB records. Any help, tutorial... Thanks TG

  I would like to connect with the database instead of "writing" all the tables in the bearings inside the Jquery page

  This is usually done with a CMS (content management system). There are commercial products CMS like WordPress, Joomla and perch. You create one or several layouts and then create pages of these page layouts using the CMS. In this way, it is possible to have hundreds of pages, each with unique content, but a page layout that can be managed in a place of sharing.

  CMSs on shelf don't require programming skills. Otherwise, some of us write our own CMS with custom functions, but this requires back-end, as with PHP programming.

• Where I could see the speed of the CPU on a 4060 Sat

  I have a 1999 Satellite 4060 XCDT model, when I go to 'my computer' then on 'System', it tells me I have a Pentium 2 and how many I have, but not the speed of the chip, RAM memory where / how can I find this (I know this is supposed to be a 333 mhz chip, but I have never seen this in fact in all menus)?

  Hello

  I think it depends a bit on what operating system you use.
  I guess this is not Windows XP, because the general tab in system properties would show you the speed of the processor. I have Office installed my unit o, if I click on HELP in the menu and then ABOUT I get a screen with a button "SYSTEM INFO". This button will take me to a summary of the material.

  BR

  Tom

• Hola el programa of Microsoft, not lo he could use well, porque me llego en Ingles. which

  Hola el programa of Microsoft, not lo he could use well, porque me llego en Ingles. Quisiera TR are posible me lo crucial en Español

  Hello

  Microsoft Community-Home-Spanish

  http://answers.Microsoft.com/es-ES

  Don

• Commander supreme 1 I lost my drive there at - it a patch or crack, that I could use so I don't have to buy the game again

  Commander supreme 1 I lost my drive there at - it a patch or crack, that I could use so I don't have to buy the game again

  Hello

  You may need to contact the manufacturer of the game for the disc

• I'm looking for a software that will speed up the startup time and when I use etc.

  I'm looking for a software that will speed up the startup time and when I use the computer for a while, it is slow going on the Web site? do I need a registry cleaner? Please notify. I have two computers with xp and vista.

  The only thing that's really going to "speed up" your computer is a faster processor, more ram and a faster internet connection.  Everything else is really a waste of money (IMHO)

• Help me I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  Function keys are used to things dirrent, depending on whether you are simply Windows or a program of work, and if you work in a program, what program it is?

  This search through the documentation of programs you use. Read also here: http://www.internetfixes.com/definitions/IF01424.htm

• I get the following error message when trying to format drive C: "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Original title: how to format drive C?

  I have Windows XP installed on my C drive, but due to the lack of hard drive space, I installed another Windows XP on drive D. Now when I try to format the C drive of the new installed Windows, I get this error:

  "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Hello

  Check if you are able to format drive C in a clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Warning: Formatting the drive will remove or erase all the data on that drive.

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  Gaara_2k6,
  Welcome to the responses of the Forums.  The short answer to your questions are Yes and no and no.

  Depends on how you format the drive, it will delete everything on the drive.  Now, it may still be recoverable with a software specialist or moving to a data recovery company.

  If you formatted your hard drive you would not be able to start to do anything, because there would be nothing on the startup disk.  With the Windows XP CD or with the recovery media provided by the manufacturer of the PC is the only way to reinstall Windows. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• using text windows Narrator to speech.are it any more voice I could use.

  Please help to see you, I'm doing an audio book using my narrator.but, like all the books there are more then one voice can be used .mans voice. female voice.and, perhaps a child voice.are it expresses more I can download it please can you help.i have windows vista, 32-bit, I thought I could use my scanner a download page and use the Narrator to transform the text into an audio book.

  Hello

  See the following article on how to change the voice of the Narrator.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-Narrator-voice

• Could use some advice for new Linksys E2500 please

  Just bought this for my parents and trying to implement. Never had any problems of implementation of a router in the past. After poping in the installation CD, the display shows all hang up, what I do. Then click on next, where it says 'Search network', then quickly changes to the "connecting to network", and then it says that it 'can't find router.". Made a mistake.  Check the settings, etc. Well, I know that the modem works fine, and I know that the router cables are properly connected to the modem. I can switch back to the old router (hook up looks exactly the same), and everything works.  (They have problems with bandwidth, which is one reason I bought a new router for Christmas).

  Also the same message if I connect directly to the new router VIA an ethernet cable. In addition, it's strange: when I just open a web browser and try to connect on the router 192.168.1.1, using no username admin password, it won't let me to the router. Even after I reset the router with a pen.  How is that even possible?  It should be default to the default password.  So now that I can't even try to configure it manually.

  Very, very frustrated and I could use some encouragement and direction. Please?  Quite a few please?

  SO, just in case anyone is interested...

  I tried to reset the router again, and that fixed it all. All the lights are flashing the first time I did, but the last time did the trick.  I knew that there can be no meaning for the default password is not working. I guess I'm not hold in the reset button long enough.

  A prime example how frustration can create more frustration. Lesson learned... once again.