Count on dates

Similar Questions

• Count unique dates in a date range

  Hey all - I need to count the number of unique of a column of dates dates. The complication is that I only need the unique dates associated with a particular person. Here is an example:

  

  In this example, Bob has 5 single dates associated with his name, Jane has 4, and Doug has 2. When the list is short, like this, I can count just straight up, but more often that otherwise, I have a list of 1000 + lines long, often with dates outside the range that I've specified, so I need a formula.

  Any help is appreciated. Let me know if this isn't enough information, or if you have a question for clarification. Thanks in advance for the help.

  OS X 3.6.2 numbers 10.10.5,.

  Hi Moose,

  You want to count the number of dates separate for which there is at least one record of Bob and to do the same type of count for each others. only single date on the table (and this is unique only in the context of column A in the table) are in line 2 and line 5. All other dates in the column occur at least twice.

  

  This table uses an index column that will contain the names to be counted. The highlight is not necessary; It's a Visual check that I used to match the number of Visual with that calculated in column G.

  Two formulas are used, one to create the index values in column D, the other to perform counts in column G.

  D2: = IF (COUNTIFS(A$1:A2,A2,C$1:C2,C2) = 1, C2"," ")

  COUNTIF uses two test-values, pairs of condition to determine the number of times where this date-name pair has been entered upward at this line in the table and include the line in the account only if the two conditions return TRUE

  • A$ 1: A2, A2: the date on the line (in the range $1 to "the line") is the same as the date in A2 ("this line of the column A")
  • C$ 1: C2, C2: the text on the line (in the range 1 $ CAN to 'this line') is the same as the text in C2 ("this line of column C")

  The County is passed back to IF.

  IF it is equal to 1, fits the text (name) on this "line" column D, where it can later be counted.

  IF the meter is not 1, IF inserts a null string in 'the line' from column D.

  The formula is filled down to the end of column D and generates the displayed list.

  G5: = COUNTIF (A"> =" & $ 2, A G, "< ="& G$ 3, D, "=" & F5)

  COUNTIF employs here three test-values, pairs of condition. Again, all this should return TRUE for a row to be included in the count.

  • A"> =" & G$ 2: the date in column A is as of the date in cell G2 "
  • A"< =" & G$ 3: the date in column A is on or before the date in the G3 cell "
  • D, '=' & F5: the text (name) in column D is the same as the text (name) to F5 ("this line of column F")

  The count is returned to the cell containing the formula.

  The formula is a city filled with the line containing the name in the list of names in column F.

  Can be found in the features list, is also noted on visible when COUNTIF = is entered into a cell on the table.

  Kind regards

  Barry

• Can't the Datalog (counter) frequency data in 2014 SignalExpress

  I'm looking to acquire data from a map PXI-6143 using SignalExpress 2014. I am the acquisition of measures of the frequency of one of the built-in counters. However, SignalExpress does not show this entry as counter available for data entry. See the attached picture for my setup:

  

  

  On the tab "Options", he says "no signals available to open a session. Any ideas what I did wrong?

  Change your method of acquisition for 1 sample on request and define your sample in seconds period.
  I think IS don't like continuous samples when you work with the frequency

  

• Count by date range

  Hi, I have data containing the name of the task and it of start and end date.

  Now, I want new data according to the above who will tell us how many tasks was running at a given date.

  Assuming that the timestamp for each date is 00:00:00 and the spots begin to Start_Dt but end just before End_dt (included lower limit, upper limit not)

  Entry:

  Task Start_Dt End_D

  A 2013-12-01 2013-12-05

  2013 B 2013-12-03-12-04

  2013 2013 C-12-03-12-04

  2013 2013 D-12-03-12-06

  2013 2013 E-12-04-12-05

  2013 2013 F-12-06-12-07

  Output:

  Beginning	End	County	(Jobs)
  2013-12-01	2013-12-03	1	(A)
  2013-12-03	2013-12-04	4	(A, B, C, D)
  2013-12-04	2013-12-05	3	(A, D, E)
  2013-12-05	2013-12-06	1	(D)
  2013-12-06	2013-12-07	1	(F)

  In the light of the foregoing, task B shouldn't be in the 3rd row, since it ended 12/04 and therefore should not be included in 12/04-12/05 range (and B did not work during this period)

  ALTER session set nls_date_format = 'YYYY-MM-DD ";

  Select tmp.* from

  (

  Select 'A', to_date('2013-12-01','YYYY-MM-DD') START_DT, to_date('2013-12-05','YYYY-MM-DD') END_DT double

  Union

  Select the TASK 'B', to_date('2013-12-03','YYYY-MM-DD') START_DT, to_date('2013-12-04','YYYY-MM-DD') END_DT double

  Union

  Select the TASK of 'C', to_date('2013-12-03','YYYY-MM-DD'), START_DT, to_date('2013-12-04','YYYY-MM-DD') double END_DT

  Union

  Select would be "TASK, to_date('2013-12-03','YYYY-MM-DD') START_DT, to_date('2013-12-06','YYYY-MM-DD') END_DT double

  Union

  Select the 'E', to_date('2013-12-04','YYYY-MM-DD') START_DT, to_date('2013-12-05','YYYY-MM-DD') END_DT of double TASK

  Union

  Select the TASK of 'F', to_date('2013-12-06','YYYY-MM-DD') START_DT, to_date('2013-12-07','YYYY-MM-DD') END_DT double

  ) tmp

  order by 2, 3

  ;

  How to write the code sql on the entry ('tmp' table)?

  Thank you

  Srinivas - y.

  Post edited by: ysri

  Post edited by: ysri. Update tasks and dates.

  Hi ysri. Try the below a. This works for both your new tasks.

  WITH T1(TASK,START_DATE,END_DATE) AS

  (SELECT 'A',TO_DATE('2013-12-01','YYYY-MM-DD'),TO_DATE('2013-12-05','YYYY-MM-DD') FROM DUAL UNION ALL

  SELECT 'B',TO_DATE('2013-12-03','YYYY-MM-DD'),TO_DATE('2013-12-04','YYYY-MM-DD') FROM DUAL UNION ALL

  SELECT 'E',TO_DATE('2013-12-03','YYYY-MM-DD'),TO_DATE('2013-12-04','YYYY-MM-DD') FROM DUAL UNION ALL

  -SELECT ' F',TO_DATE('2013-12-03','YYYY-MM-DD'),TO_DATE('2013-12-06','YYYY-MM-DD') FROM DUAL UNION ALL

  SELECT 'C',TO_DATE('2013-12-04','YYYY-MM-DD'),TO_DATE('2013-12-05','YYYY-MM-DD') FROM DUAL UNION ALL

  SELECT 'D',TO_DATE('2013-12-06','YYYY-MM-DD'),TO_DATE('2013-12-07','YYYY-MM-DD') OF THE DOUBLE

  ),

  () AS TAB2

  SELECT cnt,

  running_date,

  lag (NTC) (ORDER to ' a')

  DE)

  SELECT count (1) cnt,.

  running_date

  DE)

  SELECT task,

  start_date + T2. RN-1 running_date

  FROM t1

  (SELECT level rn FROM dual CONNECT BY level<= (select="" max((end_date-start_date)+1)="" max_rn="" from="">

  WHERE the arguments start_date + t2.rn - 1<>

  Task by ORDER, running_date)

  GROUP BY running_date

  ORDER BY running_date))

  Start_date SELECT running_date,

  CASE WHEN (running_date = (SELECT min (start_date) FROM t1)) THEN running_date + 2 running_date + 1 END ELSE as end_date,.

  CNT

  Of THE tab2

  WHERE running_date! = (SELECT min (start_date) + 1 FROM t1);

  OUTPUT:

  START_DAT END_DATE CNT

  --------- --------- ----------

  1ST DECEMBER 13 DECEMBER 3 13 1

  3 DECEMBER 13 DECEMBER 4 13 3

  4 DECEMBER 13 DECEMBER 5 13 2

  DECEMBER 6, 13 DECEMBER 7 13 1

  The output of the query even when your 'F' task is added.

  OUTPUT:

  START_DAT END_DATE CNT

  --------- --------- ----------

  1ST DECEMBER 13 DECEMBER 3 13 1

  3 DECEMBER 13 DECEMBER 4 13 4

  4 DECEMBER 13 DECEMBER 5 13 3

  5 DECEMBER 13 DECEMBER 6 13 1

  DECEMBER 6, 13 DECEMBER 7 13 1

• Performance memory Overhead counter provides data different memory Overhead summary (VIC)

  I posted the same question differently in the thread of execution, so I'm sorry to repeat myself, but I can't find an explanation in the docs.

  Looking at the values of memory performance counters, I get values such as '58.22 ".  Check that the performance of VIC tab returns the same information, so I don't know it is correct.

  Form summary at the VIC, there is a different , "Summary of memory overload" statistic, but it is usually around 120-140.  I would like to know what is the difference, and why two different (though probably related) data types, use the same label.  Ideally, it would be good to know how to convert one to the other.

  Thank you

  -David

  The overload memory under the Summary tab that you are referring to in VI Client is different from the Performance counter "overload".

  The overload memory under the Summary tab is the amount of resources of memory (in bytes) that will be used by the VM above its requirements of memory comments. This value is set if and only if the virtual machine is saved on a host that supports the functions of memory resource allocation. As off voltage mV, this is the minimum of overhead to power on the VM on the registered host.

  While the overload of the meter memory is the amount of memory overhead consumed by the virtual machine.

  Please select the meter memory to change the Chart Options tab performance to the value of the counter.

• Counter data of blackBerry Smartphones

  Can someone tell me if the Blackberry 8110 has a counter of data so I can see how many bytes have been sent or received?   I can't find one anywhere on the phone.   If there isn't one, is there more that I can control what is my use of the internet?

  Thank you

  There is no option to track usage of the BlackBerry smartphone data. Download application Mini Moni to your phone to track the use of the data.

• Eliminate duplicates while counting dates

  Hi all

  Version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0.

  
  

  How to count the dates and eliminate duplicate dates.

  For example,.

  Name from Date to Date

  AAA 31/05/2014-06/13/2014

  AAA 14/06/2014 06/27/2014

  AAA 21/06/2014 07/20/2014

  AAA 21/07/2014 08/20/2014

  We want the output as,

  County of name not days

  AAA 14

  AAA 14

  23 AAA (in this case must be eliminated 7 days from June 21, 2014-20/07/2014' because it is already counted dates previous ie.'06/14/2014 - 27/06/2014 '.) If we want the exit 23)

  AAA 31

  Thank you

  Pradeep D.

  Untested carefully... But can give you an idea:

  -----

  WITH t
       AS (SELECT 'AAA' nm,
                  TO_DATE ('05/31/2014', 'MM/DD/YYYY') from_dt,
                  TO_DATE ('06/13/2014', 'MM/DD/YYYY') TO_DT
             FROM DUAL
           UNION ALL
           SELECT 'AAA',
                  TO_DATE ('06/14/2014', 'MM/DD/YYYY'),
                  TO_DATE ('06/27/2014', 'MM/DD/YYYY')
             FROM DUAL
           UNION ALL
           SELECT 'AAA',
                  TO_DATE ('06/21/2014', 'MM/DD/YYYY'),
                  TO_DATE ('07/20/2014', 'MM/DD/YYYY')
             FROM DUAL
           UNION ALL
           SELECT 'AAA',
                  TO_DATE ('07/21/2014', 'MM/DD/YYYY'),
                  TO_DATE ('08/20/2014', 'MM/DD/YYYY')
             FROM DUAL),
       tt
       AS (SELECT nm,
                  from_dt,
                  to_dt,
                  (to_dt - from_dt) total_diff,
                  CASE
                     WHEN   LEAD (from_dt, 1)
                               OVER (PARTITION BY nm ORDER BY from_dt)
                          - to_dt < 0
                     THEN
                          LEAD (from_dt, 1)
                             OVER (PARTITION BY nm ORDER BY from_dt)
                        - to_dt
                        - 1
                     ELSE
                        0
                  END
                     diff
             FROM t)
  SELECT nm,
         from_dt,
         to_dt,
           1
         + total_diff
         + LAG (diff, 1, 0) OVER (PARTITION BY nm ORDER BY from_dt) final_diff
    FROM tt
  

  Output:

  ------------

  NM FROM_DT TO_DT FINAL_DIFF

  AAA 2014 6/13/5/31/2014 14

  AAA 2014 6/27/6/14/2014 14

  AAA 23 6/2014 7/20/21/2014

  AAA 31 7/2014-8/20/21/2014

  See you soon,.

  Manik.

• How can I enter data apple fitness?  I swim and take aerobics classes.  I don't wear my Apple Watch during this operation.

  How can I enter data of fitness on my Apple Watch?  I swim and take water aerobics classes and not wear my watch in the water.

  Hello

  It is not currently possible to enter data of fitness on Apple Watch.

  Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the health app charts (which can be added to the dashboard), which adjust the results to avoid any double counting of data from different sources.

  To add a workout that has not been registered by your watch, iPhone, or other existing data source:

  -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > add a data Point > enter the result of your workout.

  Activity types available when you add a workout currently including swimming, but do not include aerobics (other can be used instead).

• Apple Watch on the wrist, in the pocket of the pants iPhone6, step count double counted?

  Apple Watch on the wrist, in the pocket of the pants iPhone6, step count double counted?

  Hello

  No, it won't. Health and fitness data from other sources, iPhone, and Apple Watch are grouped within the app to health on the iPhone, which allows you to adjust the results to avoid any double counting of data from different sources.

• With a date if it occurs among other dates

  I need to create one you know to determine what follows.

  I need to determine if the following dates occur between a date range (the range will be variable).  If the dates occur between the date range, then count the dates.

  Office parties
  January 1, 2010
  January 2, 2010
  March 15, 2010
  August 15, 2010
  December 25, 2010

  Employee 1 - January 15, 2010-January 14, 2011
  Employee 2 - April 1, 2010 to March 31, 2011

  Employee 1-3 of the Office holidays occur
  Employee 2-2 Office holidays occur

  What woud be do you know to do this in excel?

  You could do something like:

  A2 and A4
  The holiday dates

  A7
  Date of the beginning of employee 1

  B7
  End date of employee 1

  C7
  = IF (AND (A7<><><><><><>
  (So, if the date of each holiday > start and)< end,="" it="" adds="" one="" to="" the="">

  A8
  Date of the beginning of employee 2

  B8
  End date of the employee 2

  C8
  = IF (AND (A8<><><><><><>

  It is pretty basic and you will need to enter an IF statement for each holiday (but it is not much of everything which after all). Then you can copy and paste everything you want down the columns if you would only really work with a single cell.

• Need Date must equal or after the date of beginning membership-error in po_requisitions_interface_all

  Hi all

  We have created an order forecast manuals for a purchase item in workbench CPSA for some qty and out.

  But, we are not able to get his requisition created in source.

  When we check the _Errors PO_Interface table, we found that it is wrong on with the error like -

  Need for a Date must be equal or after the apparent start date .

  Can someone please help me find the cause of this problem. Any help/pointer in this regard will be highly appreciated.

  Thank you

  Avinash

  Hi Abhishek,

  We have found the root cause of the problem.

  The BPA was not all count start date mentioned in its terms. So put us as BPA created and ran the data collection and the execution plan.

  After that, we could see its BPA release created without any errors.

  Thank you

  Avinash

• If I stopped account, no data displayed

  Hello!
  
  I use JDeveloper 11 g Release 2 (11.1.2.3.0).
  
  I have create a VO with SQL Query DataSource. The request is the follwing one:
  

  SELECT COUNT (*),
           Brand.BRA_NAME,
           Model.MOD_NAME
  FROM Sale,
           Car,
           Brand,
           Model
  WHERE ( (Sale.SALE_CAR_ID = Car.CAR_ID) AND (Car.CAR_BRAND_ID = Brand.BRA_ID)) AND (Car.CAR_MOD_ID = Model.MOD_ID)
  GROUP BY Brand.BRA_NAME, Model.MOD_NAME;

  I want that when the data is displayed in a read-only table, it shows ordered by Count (count Maximum at the top) and minimum in the last.
  
  If in my query, I put ORDER BY DESC of '' COUNT' ' (*), no data is displayed in the table.
  
  What I am doing wrong?
  
  Thanks in advance!

  Hello

  Marcccc wrote:
  Hello!

  I use JDeveloper 11 g Release 2 (11.1.2.3.0).

  I have create a VO with SQL Query DataSource.

  What is a VO?

  What I am doing wrong?

  Whenever you have a problem, after a complete test script that people can run to recreate the problem and test their ideas.

  'ORDER OF COUNT (*)' works well for me:

  SELECT       COUNT (*)
  ,       job
  FROM       scott.emp
  GROUP BY  job
  ORDER BY  COUNT (*)     DESC
  ;
  

  Output:

  ` COUNT(*) JOB
  ---------- ---------
           4 CLERK
           4 SALESMAN
           3 MANAGER
           2 ANALYST
           1 PRESIDENT
  

  Usually, people give aliases (e.g. emp_cnt in the example below) for calculated columns. These aliases can be used in the ORDER BY clause, like this:

  SELECT       COUNT (*)     AS emp_cnt
  ,       job
  FROM       scott.emp
  GROUP BY  job
  ORDER BY  emp_cnt     DESC
  ;
  

  but that is not mandatory.

• Data Center information

  Y at - it an easy way to retrieve information from data center in VC such as:

  Number of:

  -Hosts

  -Virtual Machines

  -Groups

  -Networks

  -Data warehouses

  Who is left in PowerShell and the VITK easy.

  Get-VMHost | Measure-Object | Select Count
  Get-VM | Measure-Object | Select Count
  Get-Cluster | Measure-Object | Select Count
  Get-VirtualPortGroup -VMHost (Get-VMHost -Name ) | Measure-Object | Select Count
  Get-Datastore | Measure-Object | Select Count
  

  Note that you can add selection criteria between the two to select specific objects.

  For example, if you want to only count VMFS data warehouses you could do:

  Get-Datastore | Where-Object {$_.Type -eq "VMFS"} | Measure-Object | select Count
  

• Calculation based on the date, but the year &amp; month on fileds separate.

  Hello
  Simple question:
  I have a table with the SOURCE fields 9i, YEAR, MONTH
  Because I don't have a date field, how I count for example records < 07/2008?
  
  SAMPLE DATA:
  .
  .
  .
  APPLES; 2008; 06
  APPLES; 2008; 07
  APPLES; 2008; 08
  .
  .
  .
  
  Thanks in advance for your help.

  Hello
  do you want this?

  with data
  as
  (select 'APPLES' SOURCE ,'2008' yy,'06' mm from dual union all
   select 'APPLES'  ,'2008' ,'07'  from dual union all
   select 'APPLES'  ,'2008' ,'08'  from dual)
  select count(*)
  from data
  where to_date(yy||mm,'YYYYMM') <= to_date('072008','MMYYYY')
  

• How can I get the web page to keep the button count value

  Hello
  I have a button that, whenever he is pressed by slices, a number. The number is displayed in a text box. This set works very well on my web page. However if I close the web page and then reopen it, the numbers go back to zero. How can I keep the number is (for example 10) and keep incrementing?
  I have the button on frame 1 and the text on the image 2 box.
  
  Thank you
  Paul

  Resolved to myself. Much less complicated that I was trying. Hope this helps someone else.

  var my_so:SharedObject = SharedObject.getLocal ("savedShare", "/");
  dir_btn.onRelease = function() {}
  If (my_so.data.count == undefined) {}
  my_so. Data.Count = 1;
  }
  else {}
  my_so. Data.Count ++;
  my_so. Flush();
  }
  trace ("my_so.data.count =" + my_so.data.count);
  }
  so_txt. Text = my_so.data.count;

  Easy when you know how!