Course VI Path returns the location of the original source file, exe does not.
LV-2010 running.
I have a VI that opens a PDF style manual when the user clicks a button. My development project is configured with a project folder main and 3 subfolders called Source, Application and install. Of course, the source code is in the Source folder. I also have a copy of the manual for the Application with the application.
When operating, the VI uses object traced the current VI as starting point for where is the manual. Current path of the VI includes the Source folder in the path that it generates. This is not a problem when you run the source code, like the VI is running in this folder. Problem is that the Source folder is also included in the path generated running on the target computer running the exe. There is no Source folder on the target computer, so I am at a loss to explain why this is happening. It's probably a parameter in the constructor of my application, but I can't. Never had this problem before. Can anyone help? Thank you.
Tags: NI Software
Similar Questions
-
find the path to the original source file
How to find the way to original source file in Lightroom?
Hi richardc,.
Right or Ctrl click on the file in mode grid, then click Show Explore / Finder to see the location of the original file when its connected to the Lightroom Catalog.
Let us know if this helps
Kind regards
Mohit
-
The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ? Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.
Thank you best regards &.
Atul Zade.
CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.
John
-
Moving the library back to the original source files
I am in final cut pro x and by mistake I was importing my media AND copy the files in the library instead of him reading from the original source. I want to know if there is a way to go back and change it. Thanks for any help.
You can create a library and use the change settings of the Inspector to indicate the location outside the media library. Move the event / project (s) you want to have external support for the new library. Once you are convinced that events/projects in the new library are working, you can move events of origin to the trash. (Or yo can trash the entire library in the Finder).
Russ
-
'Forward' to move to the next audio file button does not work with audio books.
Hi all
My first problem I can't understand mine. I did a search through old messages using several key words and couldn't find it.
-Sansa Fuze worm-1...
-New firmware dated 12/27/09
Mode - MSC
I buy the audio book CD and then extract them to MP3 so I can listen to on the "rocket". I put all the MP3 of the book in a directory, use Mp3tag to put in place a track number, title, author, and such then I drag the folder to the folder "audiobook" on the "rocket".
I start to play the first file, and most things work very well. The documents in the file and I cannot FF or REW in this file. When this file is complete, the "rocket" ahead to the next file of its own. Bookmarking works fine. When I try to use the 'next' button to move to the next file, however, nothing happens. If I try to use the 'back' button to go to the previous file, nothing happens. Very strange.
The button works fine when I'm listening to MP3 music. I can jump forward or backward through the tracks normally. It is the same with podcasts.
I don't normally jump before the audio book titles, but sometimes I'll do it if I lose interest in the book and hope to find something more interesting on a next track.
Thanks in advance for any help with this one.
See you soon.
Generic audio books works a little bit differently from the Audible. New audio book functionality, allowing any type of playable, always has the option of cool chapter mode, but it functiond otherwise than by playing an Audible book.
Sound files have chapter breaks that can be selected in the part of the main work. "Regular" audio books have just chapter-titles. Try to select the chapter mode; It affects to jump between tracks.
Bob
-
Unable to connect to the internet. CRDPRAT.exe does not.
CRDPRAT.exe
Hello
· When you get this error message
· When you open Internet Explorer you get CRDPRAT.exe message when you start the computer or internet explore.
You can also visit this link on how to describe the error:
http://support.Microsoft.com/kb/555375
Hope the helps of information. Please post back and we do know.
-
Hello, I have tried everything to fix this problem and nothing has worked. I removed the cd-rom drive and reinstalled, I open my registry and remove the filters above and below the exact file, what I was told. I don't know what else to do, nothing is solved the problem. Please help me, I really need to use my Cd-rom for school assignments.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
CFHeader to set the content-disposition file name does not
Hello
We have the code that creates a workbook with the POI library and then using CFHeader to set name of file with content-disposition, as shown in the code below. After making the content available, we write the Excel workbook in the browser. The code is below.
This works perfectly in CF 9 but when we went to SEE 11 we found it doesn't work anymore. The same code works fine in CF 9 but not in CF 11. The file name is ignored and the file is now given the name of the cfm script is called with the correct xls extension.
Any suggestions as to what is the cause for CF not CF 9 11 would be appreciated.
Code:
< name cfheader = "Content-Disposition" value = "seizure; filename = "#arguments. "FileName #" ">"
< cfscript >
Write the workbook in the ByteArrayOutputStream to get the ContentLength
local.workBook.write (local.outStream);
local. Len = arrayLen (local.outStream.toByteArray ());
local.outStream.flush ();
local.outStream.close ();
Working now on the display of the browser output stream
local. Context = getPageContext();
local.context.setFlushOutput (false);
Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)
local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());
retrieve the output stream from the response to the browser.
local.out = local.response.getOutputStream ();
local. Response.Reset ();
Set the content type and the contentLength
If the two are not provided, then the data will be displayed not correctly
local.response.setContentType("application/vnd.ms-excel");
local.response.setContentLength (local.len);
write the workbook in the binary output of http response stream
local.workBook.write (local.out);
clean things up and close the output stream
local.out.Flush ();
local.response.flushBuffer ();
local.out.Close ();
< / cfscript >
Kind regards
Leslie
I found the problem. He is not related to the use of the POI library to all. Also we are migrating to CF 11 currently and just try to get things migrated as is. After our migration, we will look at CFSpreadsheet to see if it can meet the demand of our users formatting now.
It seems that the call to local.response.reset () in CF 11 now clears the response properties, including the elements of headers. CF 9, he should not have deleted them as background. By setting the Content-Disposition response header after this point, the value was available for the browser to use.
If the default file for a generated file name must be the name of the script creating the name of the file followed by the file appropriate for the file extension.
The updated code is below, note the lines of code in bold.
Write the workbook in the ByteArrayOutputStream to get the ContentLength
local.workBook.write (local.outStream);
local. Len = arrayLen (local.outStream.toByteArray ());
local.outStream.flush ();
local.outStream.close ();
Working now on the display of the browser output stream
local. Context = getPageContext();
local.context.setFlushOutput (false);
Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)
local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());
retrieve the output stream from the response to the browser.
local.out = local.response.getOutputStream ();
local. Response.Reset ();
Send the browser the good content-disposition header
local.resp = local.context.getResponse ();
local.resp.setHeader (("string", "Content-Disposition") javacast, javacast ("string", "001438.EPS nt;filename=#arguments.fileName#")); "))
Set the content type and the contentLength
If the two are not provided, then the data will be displayed not correctly
local.response.setContentType("application/vnd.ms-excel");
local.response.setContentLength (local.len);
write the workbook in the binary output of http response stream
local.workBook.write (local.out);
clean things up and close the output stream
local.out.Flush ();
local.response.flushBuffer ();
local.out.Close ();
-
Original title: Windows Movie Maker 6.0 Save Bug?
Something's weird with Windows Movie Maker...
It cannot record movies, I create somehow.
Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?
I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!
Something's weird with Windows Movie Maker...
It cannot record movies, I create somehow.
Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?
I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!
============================
It is sometimes possible to publish / save in the
Even if the DV - AVI format. WMV fails. If you are
running Vista Movie Maker 6.see the following:Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerWIndows Vista Movie Maker 6
The following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpgAnd sometimes unchecking that will enable all filters
registration in progress...Reach... Tools / Options / compatibility... tab and
Uncheck all filters / OK.The error that you received can be caused by the following:
(1) source incompatible or damaged files (photos,
video clips, audio clips).Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv
Audio - wav, wma, wmv(2) the project is too big or too complex for your system
resources. Made video is time CPU and
can sometimes cause blackouts.The following items may be worth a visit:
Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.htmlWindows Movie Maker error
Cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/ -
How to return on a Subvi in a calling VI and does not stop the calling function
I am writing a program which consists of a call VI and one under VI. I want to call function to run continuously and be able to trigger the sub VI (via activation of the voice). I want the sub VI to expire automatically after 10 seconds and return to the calling VI (master), which will continue until the sub VI is still called.
I found a way to expire the sub VI using the 'stop' command, but he left the appellant VI also, which does not. I know there is no 'back' or 'soft stop' in LabVIEW, but someone he knows a way to do this?
What you really need in your Subvi is something like what is shown below. You specify the delay using the delay function or get Date/Time In Seconds msec. would work in the same way.
-
After this evaluation period how can I return the original windows
After this evaluation period how can I return the original windows
By reinstalling the Moose of operating system or factory reset (if your computer supports)
You will need to re - install all the applications you added since as well.
-
set_item_property changing the text, but how to return the original value
Hi all
I use Oracle Forms Builder 10 gr 2 / I have the following problem: in a button I trigger when it is pressed. And then I change a few elements prompt text. But my problem is how to return the original prompt text. A kind of refresh or clear?
Here is a piece of code that modifies the prompt text:
Thanks in advance,set_item_property('XXBG_CE_STATEMENT_LINES_NEW.AGENT_NO', PROMPT_TEXT, get_item_property('XXBG_CE_STATEMENT_LINES_NEW.AGENT_NO', prompt_text) || '*');
Bahchevanov.This is not tested, but it's something like this:
declare v_item varchar2(200); begin v_item := get_block_property('block',first_item); loop exit when v_item = 'block.'||null; set_item_property(...); v_item := 'block.'||get_item_property(v_item,nextitem ); end loop; end;
-
OK, it's a simple question. I have a mapTools package defined in the MapManager.as ActionScript file, as shown in the attached code. The directory structure looks lke this:
C:\
-\engine
-------Media
-\Flash
-\mapTools
-MapManager.as
--------------------------- MAP.fla
If the MapManager.as and MAP.fla files are in the same directory. So I open MAP.fla and when I do TestMovie I get this error:
"5001: the name of package 'mapTools' does not reflect the location of this file." Please change the name of the definition of the package inside this file, or move the file. C:\engine\media\Flash\mapTools\MapManager.as ".
What is the cause of this error?
If she is the document class, replace the fla in mapTools and remove mapTools the package name.
-
The Web of Toshiba site does not recognize of my drive hard number and P/N
Hello
There is a little less than two months, I bought my HDD Toshiba Canvio Basics 3.0 from Amazon. The hard drive has stopped working for some reason any (I drop or something, it simply stopped working).
Of course, I was trying to use my warranty to repair or Exchange it, but the Web of Toshiba site does not recognize my serial number and product number. They are just there, black and white on the sticker on the back of my hard drive, but the site says they are not valid.
Someone has an idea what is happening? I would rather not throw 50 euros by the window for less than two months of use.
Product number is HDTB105XK3AA - and not to HDTB105 * E * K3AA like some sites say (including Amazon).
Thanks for your help.
Stand by. Have you contacted Amazon using Amazon options for repair under warranty or Exchange?
Check please help Amazon option and collect detailed information on defective, damaged or significantly different returns.
Two years ago I had problem with the mobile phone bought by Amazon and I send direct Amazon with bill Amazon.
By the way: can you please post the link where you have tried to check the serial number of your HARD drive?
-
Installation of the printer. error: "printer spooler does not.
Original title: printer Installation
Windows XP SP3 home edition:
Software printer installation error message, "printer spooler does not" no printer is installed or deposited.
This suggestion can help.
Quote from: http://snipurl.com/1mdayq [www_eventid_net]
From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.
To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\
\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting. Hope this helps, Gerry Cornell
Maybe you are looking for
-
How can I delete unwanted certificate from keychain.
How can I remove an unwanted Keychain certificate?
-
Equium A100-147: upgrade from Vista Hello I recently received an email from Toshiba regarding the purchase of the upgrade to Vista. Followed the link and instructions, selected the "Toshiba Corp." option, when asked for the "serialized form", I chose
-
I forgot my windows password for my mini hp 100
Help, please! Try to use my computer hp mini 100 after 4 years and don't remember my password. Even the hint is without help. Help, please. Thank you
-
How can I activate my account?
-
Cannot remove the bitlocker encryption
I added a password for bitlocker on an external hard drive usb, now I want to remove this password, so I click on the drive, select "Manage Bitlocker", then click on 'Remove the password of this player' and get a message "this password is the only wa