Covers Windows Server 2008 r2 freeze displayed «...» Shutdown... »

Similar Questions

• I can't do the web pages of my drive to display in Internet Explorer in Windows Server 2008 32-bit

  I saved web pages on my local drive, but I can't seem to display in Internet Explorer in Windows Server 2008 32-bit by entering the URL in the address bar, even if they appear when I click on the file in Windows Explorer. The IIS7 start page, even if the document by default, I made the file you want.

  Hello

  The issue you have posted is related to Windows Server 2008, I recommend you post this question in the Windows Server forum.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Is there a network administrator command to display a list of users in WIndows Server 2008

  I work in a Windows Server 2008 R2 environment.  Computers are running Windows 7 proffessional addition 3 light customer ports.  I have 8 users on my license 10 users.  We continue to send a message that a user must log out before another user can log on.  This was not the case last week, but began this week only.

  How do I watch, as an administrator, which is connected from address.  All my Internet service providers are static.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

  Hi all

  I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

  Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

  I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

  It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

  Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I need lenovo G530 Driver for windows server 2008

  Hello

  I have a Lenovo G530 4666 series, I have installed the windows Server 2008 operating system and I can't install drivers.

  I need drivers for display adapter, sound and wireless LAN adapter

  Hello
   
   
  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below: +.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• RDP port not listening in Windows Server 2008 standard with Sp2

  Hi all

  I have Windows 2008 Server Std SP2 Domain Member Server...  Since week last sur-quartiers, am not able to take remote control of desktop... But I can't able to Ping on my network server... I have check the setting remotely on the server... It is activated... and also the desktop remotely (Terminal Services) service was launched with success...  I checked my firewall to network for blocking port (3389)... But there is not a lot of block in my network firewall... I also disabled windows firewall on my server... But still, I could not able to RDP... I have also checked my settings in domain GPOS and GPO Local for RDP block... But there is no such active parameters.  I did following the troubleshooting steps, but still the problem persists
  1 Telnet IP_serveur 3389
  Result: Failed to open connection to the host, on port 3389:
  2. netstat - n - a o | find "3389" (i run this command in my server RDP problem)
  Result: nothing displayed (port 3389 are not)
  3 I again & again restarted the server and the Terminal Server service, but there is still problem
  4.i change the RDP port only and restarted the service so that the server, but still problem exists
  5. I checked all RDP associated registry settings, everything is perfect
  Please help me solve this problem
  I need your urgent response precious
  Thanks in advance

  Hello Sheik

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Error 0xc00000e9 on Windows Server 2008 std

  I have a Dell Poweredge R410 which works well for over 3 years now and has Windows Server 2008 std 64 bit.

  At Christmas, let him download and install updates.

  But going back, I found it displayed error '0xc00000e9' and ' boot manager is missing or damaged.

  I tried to repair by original DVD disc but I can't find the installation of windows 'fix' and on that list, empty it.

  If I try to boot with the disc of Windows 7 Pro, I can see the existing installation of windows.

  How can I fix this server?

  I can not format because of the payload inside.

  Any help?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Drivers for Windows Server 2008 R2

  PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

  We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

  Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

  Note:

  • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
  • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

  If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

  Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

  This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

  #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

  Can you be it someone from Dell and or this forum please send information on these issues?

  #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

  #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

  #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

  Thanks for your information, comments and your support!

  OptimalState

  I was finally sent to someone who could give me some information on this within Dell, here's what they said:

  PE 1950/2950 drivers:

  The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

  MD3000i:

  I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

  So, it looks like October before MD3000i will be supported.

  OptimalState

• Product key for Windows Server 2008 R2 OEM becomes key to retail

  Hello

  I'm a developer attempts to deploy Windows Server 2008 R2 with Windows OPK.

  The machine, I am preparing has embedded OEM product key and Microsoft Genuine Advantage Diagnostic Tool (MGADiag.exe) shows the Type of product as ID:

  3 OEM System Builder

  I remove the product key using the command as directed by the documentation:

  c:\Windows\System32\sysprep\sysprep.exe/generalize/quiet/Shutdown /oobe

  After the hoops and installation of the final image MGADiag.exe shows product Type ID as

  5 - retail

  What should be the ID of the final product? Selling retail or OEM?

  There is a point of entry in the answer file to enter the product key, but I am not implement OEM Activation and I have only a product key, I can't use (according to the license agreement). Then I left empty.

  Note in Windows 7 discussion because I use the preinstallation kit OEM also applies to it as well.

  Thanks for looking

  Concerning

  Carlo

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Performance issues with Windows Server 2008 host

  Hi all

  If I use a Windows Server 2008 host on my ESXi 4 installation.  I've recently upgraded to version 4 and had previously experienced similar problems and 3.5.  I also improved the hardware in the virtual computer to version 7 on all my guest OS.  The host in question is a file server.  Essentially what happens is sometimes that if a user opens a document (for most of the audio and/or video documents), the media file will take a minute or two to load then jump during playback.  If it's something like a file PDF/Word/Excel, the respective program crashes when the file loads or changes are saved, taking about a minute to respond to the user to enter again.  This problem is also very sparadic.  I even had this problem occurs when I'm the only user accessing the file server.  The specification of my VMware host is 3.2 GHz Xeon dual processor and 7 GB of RAM.  Two data warehouses are hosted on internal SATA hard drives.  ESXi is on the build 219382.  VMware tools is installed and update on all guest OS so far.  With regard to the use of the resources on the computer host, the memory usage with all my virtual machines running is almost always around 5.2 GB on the 7 available and the CPU usage is usually around 2 GHz.

  Looking at the logs performance monitor, I noticed an increase in the use of the disc during the shutdowns.  Are there utilities built to test the internal hard drives to find errors?  If this isn't the case, anyone recommend a utility that I can use to do this?

  Other ideas are also welcome.

  As mentioned disk SATA performance is less than ideal, or even acceptable by many people. The SATA drives in a configuration having non-RAID which makes it doubly Yes. If they were at least in a RAID 0, 0 + 1 or 5 configuration you would have best performance among readers (would be loath to 0 though, since there is no parity involved).

  Using the means on board mode SATA drive controller (or not RAID) of the SATA it runs the performance as low as possible.

  I wouldn't have even thought to have a server, or a system, used as a server that does not use RAID functions at least for redundancy. Couple that with discs that aren't going to cause bottlenecks as a standard too. Who used to refer to SCSI drives high speed, but also means using SAS drives these days (since they are replacing older parallel SCSI drives). The most difficult configurations for ESX, are performed on the server class hardware, which has access to a shared storage (which is high performance) on a fast network (Go to our days, or fiber) or a RAID array internally, which will not cause performance problems.

  You can try setting the server configuration, you have now, but that will only take you so far. You will need to the major weak links in the system. A (a major) is the SATA storage as stand-alone drives. The other is a network of 100 MB, which isn't too bad, but is still a performance hit when you share all traffic with these two ports. Moving to a GB switch could help the part of the question, but you will still have to solve problems of disk performance. If there is a decent amount of shared storage attached network where you are, see if they can give you a reasonable amount for the servers you are running on the host computer. Of course, you'll want to also be on the fastest possible network/connection of this storage.

• Windows server 2008 R2 Enterprise Edition on esx4.0 - Frozen smile

  I currently have a problem whereby the mouse freezes randomly when you use the vsphere client console 4. So far, this has happened 4 times and each ocassion while using the MMC DNS admin in 2008 R2. The mouse freezes and the system stops responding, CtrlALTINS does nothing. only option left is to power down the virtual machine. This only seems to happen if I use a remote to the same virtual machine MS RDP session.

  has anyone seen cela or have any ideas?

  Thank you

  Smudger

  The problem is with the video driver VMware Tools.  I recommend to uninstall VMware tools and then reinstall when to perform a custom installation and deselect the video driver.  This is a known issue with Windows Server 2008 R2 and WIndows 7 on ESX and happens only a console and not office session remotely.

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.