CP5 returning student at the beginning of a lesson

Similar Questions

• How can I return at the beginning of the current selection?

  The hearing 3 and earlier versions, if I wanted to hear the audio selected, I made the selection in the Waveform Editor, you press Play and the selection would play.  He would play the same selection again if I stopped reading and press Play again.  CS5.5 and 6 that appears not to work the first time you press Play after selecting some audio.  After that, the audio is just resumes since when he arrested him.

  Is it possible to get the current time indicator to return at the beginning of a selection?

  Robert

  I find that it is quite consistent in his behavior. But if you want to study the possibilities, go in Edition > Preferences > reading and you have several options of course altering it.

• When I hit return after typing, the cursor back at the beginning of the sentence

  I opened a new layer.

  I type my text

  I knocked back '

  The cursor begins to type at the beginning of the sentence, by typing the right over the text that I just finished.  It will not go to the next line.  I use PS 2 and I have never seen this, nor I know what to do about this.

  Help...

  Thank you

  Open the character Panel and set auto line spacing

  

  You will probably open the Panel in the window menu

• The beginning of each song is cut (+-1.5 dry) when you use the bluetooth speaker

  Hello world!

  I was wondering if someone could help me with my iPod Touch 6th gen.

  When I connect the Ipod to the bluetooth on my JBL Flip3 speaker, most of the songs is cut off at the beginning of +/-1.5 s (although this does not occur when I use one cable mini-jack to connect both devices).

  A Professor of music & dance, I find very important to have at the beginning of each song to count in my students.

  I tired using my ipod on several other bluetooth speakers and it's always the same problem. On the other hand my friend who has an iPhone is not this issue using my 3 Flip from JBL. So I think it's something to do with the real iPod.

  I tried to go to ITunes<>

  I'd appreciate any help!

  Tahnks a lot.

  Lauren

  Lauren,

  I have exactly the same problem with my iPhone 5 s (running IOS 9.2). I could not have described to me the problem more clear that you did.

  When I connect my iphone to my Insignia NS-CSPBTHOL-BK and activate Bluetooth, I feel the same break at the beginning of my music. This does not happen if I use the input at THE.

  My phone has Bluetooth 4.0, but I can't determine the version has the speaker. Also, could there be a problem of format of file, or the fact that I play most of my music iTunes game and not the device itself?

  I wonder if there is some sort of setting I to turn on or off on my phone or my computer.

• The data read into the buffer HAVE lack samples at the beginning

  I use a box USB-6251. The program implements two channels of AI (read I and Q) on a single task and one channel on another task. The channel uses the ai\SampleClock as its clock, so that both are synchronized. C creates a digital pulse periodic rising edge (a clock basically) which is used as a trigger on an external function generator. The signal from the unit after going through some material, external signal processing is ultimately what is read by the channel of GOT it.

  We know from the relevant signals, they seem to be correctly synchronized scope. IE, the analog signal to read arrived on the channel of the AI of the acquisition of data more or less instananeously when the trigger is activated. If there is a delay, it is of the order of microseconds.

  However, when I read in the buffer of HAVE (repeated FiniteSamples), waveform, I always come back has a section of samples at the beginning that seem to be returned of the first actually read data-point (see attached image). This delay is of the order of milliseconds (it varies with each series).

  I want to totally eliminate this delay. The signal should be a sinusoid which begins to sample 0 and is continuous through until the last sample read.

  I put the code below.

  Installation program:

  Create analog read the task
  
  analogReadTask = new Task ("analogReadTask");
  
  Create the virtual channel for the component I
  
  analogReadTask.AIChannels.CreateVoltageChannel (initParams.AddrI.ChannelAddress, 'I', AITerminalConfiguration.Differential,-4, 4, AIVoltageUnits.Volts);
  Create the virtual channel for the Q component
  
  analogReadTask.AIChannels.CreateVoltageChannel (initParams.AddrQ.ChannelAddress, 'Q', AITerminalConfiguration.Differential,-4, 4, AIVoltageUnits.Volts);
  To set the clock for the analog readings
  
  analogReadTask.Timing.ConfigureSampleClock (string. Empty, initParams.SamplingRateHz, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, Totalechantillons);
  Create the mult-channel drive
  
  analogReader = new AnalogMultiChannelReader (analogReadTask.Stream);
  
                  analogReader.SynchronizeCallbacks = false;
  pulseWriterTask = new Task ("pulseWriterTask");
  Creating a digital output channel that provides the trigger to the U/S system
  
  pulseWriterTask.DOChannels.CreateChannel (initParams.AddrUsTrigger.PortLineAddress, "US trigger", ChannelLineGrouping.OneChannelForEachLine ");
  
  pulseWriterTask.Timing.ConfigureSampleClock ("/ SampleClock/AI/Dev1", initParams.SamplingRateHz, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, samplesPerPulse);
  
  pulseWriterTask.Stream.Buffer.OutputBufferSize = samplesPerPulse;
  
  pulseWriterTask.Stream.WriteRegenerationMode = WriteRegenerationMode.AllowRegeneration;
  pulseWriter = new DigitalSingleChannelWriter (pulseWriterTask.Stream);
  pulseWaveform = new DigitalWaveform (samplesPerPulse, 1, DigitalState.ForceDown);
  
  pulseWaveform.Signals [0]. The States [0] = DigitalState.ForceUp;
  analogReadTask.Control (TaskAction.Verify);
  
  pulseWriterTask.Control (TaskAction.Verify);
  
  

  From reading:

  analogReadTask.Start ();
  
  Start writing the digital pulse, however it will not start
  
  until the AI/SampleClock begins, so implicitly synchronizing the two tasks
  
  pulseWriter.WriteWaveform (pulseWaveform, true);
  analogReader.BeginReadWaveform (Totalechantillons, readerCallback, analogReadTask);

  Result (should be a sinusoid from end to end)

  

  Always seems to solve these problems, shortly after their validation.

  The problem has start the digital task AFTER the analog task. In the small delay between the two lines of code running, read analog had already begun, and so some of the impulses of the AI/SampleClock were missed by the task. The order of departure between the two tasks of switching solves the problem.

• Error creating a salary. ORA-01422: exact fetch returns more than the requested number of rows in the hr_maintain_proposal_swi procedure insert_salary_proposal package

  Hi all

  We try to add new proposal for a salary of some employees from form August 1, 2015 (the Date of the beginning of employee)

  There is no existing salary proposal doesn't exist for these employees.

  We get below error.

  
  

  ORA-01422: exact fetch returns more than the requested number of rows in the hr_maintain_proposal_swi procedure insert_salary_proposal package

  
  

  Help, please.

  Thank you

  Tarun

  Hi John,.

  If it helps, take a look at the following note:

  ORA-01422 exact Fetch returns more than number of lines requested in Hr_maintain_proposal_swi (Doc ID 1673527.1)

  Kind regards

  Rajen

• ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  Hello!

  I have a simple object type and a proecdure in which I am trying to use it to insert into another table

  -object

  CREATE ORREPLACETYPEmt_mtg ASOBJECT

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  CREATE ORREPLACETYPEREF_MTG ASTABLEOFMt_MTG ;

  -same structure as the use of sampletbl target table in the cursor query

  create table tbl_MT_MTG

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  -procedure

  CREATE ORREPLACEINTERIORTEST_PROCEDURE1

  AS

  ref_cur sys_refcursor ;

  REFR ref_mtg ;

  BEGIN

  OPEN ref_cur FOR

  Select acol,

  BCOL

  DE sampletbl où rownum<10;

  Fetch ref_cur in bulk collectintorefr;

  Insert intotbl_MT_MTG(acol,bcol)selectacol,bcol fromtable(refr);

  commit;

  CLOSE Ref_cur;

  END;

  /

  When I run this procedure fails with

  ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  ORA-06512: at "TEST_PROCEDURE1", line 10

  ORA-06512: at line 2

  Any help on this please...

  Thanks to an OLD POST below

  so perfect helped me! Thank you

  Tubby

  After 5 years of more :-)

  How to store refcursor in collection How to store refcursor in collection

• To delete the characters only at the beginning of a string using regexp_replace

  I want to be able to delete the characters in a string only until the first numeric value.  If it takes place after the digital, I want to keep them.

  "for example"AB1234' becomes '1234', 'AB1234C' becomes ' 1234 C.

  It might be also spaces and other types of characters at the beginning.  I tried this:

  Select

  regexp_replace ('ABC1234', ' [^ [: digit:]]').

  regexp_replace ('AB 1234',' [^ [: digit:]]').

  regexp_replace ('AB 01234',' [^ [: digit:]]').

  regexp_replace ('AB1234C', ' [^ [: digit:]]').

  regexp_replace ('^ 1234', ' [^ [: digit:]]').

  regexp_replace ('* #1234Z ',' [^ [: digit:]]')

  OF THE DOUBLE

  For all except "AB 01234' returned '1234' so it retains the digital.    For "AB 01234' it returns correctly '01234'

  The bad are those with a character after digital, for example "AB1234C".

  I know it I'm missing something here, can someone please help with this?

  Thank you

  SQL> with t
    2  as
    3  (
    4  select 'ABC1234' str from dual
    5  union all
    6  select 'AB 1234' str from dual
    7  union all
    8  select 'AB 01234' str from dual
    9  union all
   10  select 'AB1234C' str from dual
   11  union all
   12  select '^1234' str from dual
   13  union all
   14  select '*#1234Z' str from dual
   15  )
   16  select str
   17       , regexp_replace(str, '^[^[:digit:]]+') str_new
   18    from t;
  
  STR      STR_NEW
  -------- --------
  ABC1234  1234
  AB 1234  1234
  AB 01234 01234
  AB1234C  1234C
  ^1234    1234
  *#1234Z  1234Z
  
  6 rows selected.
  

• With rendering problems. Rendering started taking 10 times longer. I have pleanty of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  With rendering problems. Rendering started taking 10 times longer. I have a lot of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  I determined the cause. Damaged media. Copy old sequence in new chronology cross me if I return after any change in the timeline. I am able to export own media. No change to hardware and software recently. I'm running Windows 10. (Hatred, dating back to 7)

• Get the beginning and the duration of the clip currently rendered?

  Hello

  I have created an effect of After Effects for use in Premier Pro.

  Made Duding I need to know the beginning and the duration of a clip.

  The problem is that if my effect is applied several times on the timeline, clipStart and clipDuration information are sometimes returned to a different clip (not the one made).

  In the routine of rendering:

  A_long clipDuration, clipStart.

  ...

  ...

  	/ * Only Premiere Pro supported.
  	*/
  	If (in_data-> appl_id == 'Adjusted') {}

  		UtilitySuite AEFX_SuiteScoper < PF_UtilitySuite8 > =
  					(AEFX_SuiteScoper < PF_UtilitySuite8 >)	in_data,
  					kPFUtilitySuite, kPFUtilitySuiteVersion8,
  					out_data);

  		If (err == PF_Err_NONE) {}
  		Err = (utilitySuite-> GetClipDuration (-> effect_ref, & clipDuration in_data));
  		}

  		If (err == PF_Err_NONE) {}
  		Err = (utilitySuite-> GetClipStart (-> effect_ref, & clipStart in_data));
  		}

  How can I get the good clip beginning and duration of the returned item?

  Thank you.

  PF_OutFlag_WIDE_TIME_INPUT changed output indicators. This version corrects information early and clip duration.

• How many fields have horizontally with a label at the beginning of each line

  jdev12c

  I'm trying to implement search criteria screen myself.

  When I select a lookup field in a drop-down list, this field is added to the screen. It has a label, a text field and a selectOneChoice of the operator (with value of begin, end, especially, between the two, etc.).

  When to choose another field of research in the list, a new line is added to the screen.

  I want all tags must be aligned to the right, text boxes are aligned and the selectOneChoice is just after the text box.

  I tried to generate PanelFormLayout for each line, with lines of property = 1 and argument maxcolumns = 3.

  The problem I have with this approach is: labels for each line don't align. Also, I have data recovery problem within each PanelFormLayout. The mother of PanelFormLayouts, he sees several PanelFormLayout. But the returned value of the first PanelFormLayout.

  Please advice what kind of layout that I use. Thank you.

  You can do this using af: panelLabelAndMessage,.

  just surround all your filed with the horizontal band layout and simple true set for all fields, then surround group layout with an element of label and message board

  Source XMl-

  It will look like this - https://drive.google.com/file/d/0B0Usl2n1Wz8vUEtPdnVtUC1mcjA/edit?usp=sharing

  See - http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_panelLabelAndMessage.html

  -Ashish

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• Hide TOC when the user navigates to the beginning of the same blade

  Hello

  I have a project that includes a series of clips video (each clip is on a transparency) and the user must watch all the videos to complete the course.  Therefore, we took the scroll bar, forward, fast forward, etc. from the PlayBar and also don't allow navigation to the slides that have already been viewed.   I have each slide set to hide the table of contents at the entrance so that when they use the table of contents to go back and review a slide, they have to close.  Works great, except when a user decides that they were not paying attention, or for any other reason, they want to return at the beginning of the slide they are displayed.  Then, when they use the table of contents to the beginning of the same blade that they are on the books of navigation, but the table of contents is not hidden.  For users, this is considered as an inconsistency and as if something is broken.  Is it possible for me to trigger an action automatically to say the second 1 mark to close the table of contents?

  I am using Captivate 7.0.1.237 on a Mac Pro, running the Mavericks.

  Thank you

  Walter

  Captivate has no way by default to do.  Using the table of contents to return at the beginning of the same blade you DO NOT enforce the event on slide enter again.  If you enter the slide to ANOTHER slide, which fires.

  There is a free widget that allows you to perform advanced time-based actions:

  http://www.Infosemantics.com.au/widgetking/the-widget-pages/

  However, this widget may not work in any version after Cp6.1:

  http://captivatedev.com/2012/09/26/Adobe-Captivate-6-0-free-widget-time-based-actions/

  So it's a SWF widget not compatible with HTML5

• Cannot use spaces at the beginning of the second line of wrapped text

  Hello!

  My question is simple:

  When I got the text inside a text box, and it wraps at the end of the box, why can't put spaces at the beginning of the second line (the wrapped)?

  Because the beginnings of words always wrap to the next line, with spaces accumulate after the word at the end of the previous line.  Any text automatically formatting process skin for it.

  If you want seats at the front, press return first, to force the start of a new line, and then type your spaces.

  -Christmas

• Return by using the function number

  How can I return number using the function.
  
  Here is my procedure but do not in the name of variable or setting up as a variable...
  
  create or replace function Calculate_number)
  Number 1 in number,
  Number2 number)
  Return number is
  Start
  declare
  number of result;
  
  Select number1 + number2 as a result of double;
  
  
  Return (result);
  end;

  Hello

  You have not need double a lot in PL/SQL.

  CREATE OR REPLACE FUNCTION Calculate_number
  (
       number1 IN NUMBER,
       number2 IN NUMBER
  )
  RETURN NUMBER
  DETERMINISTIC
  IS
         result number;
  BEGIN
       result := number1 + number2;
  
       RETURN Result;
  END      Calculate_number;
  

  Strored procedures, local variables are declared between statements IS and BEGIN. DECLARE in a stored procedure starts a nested block to BEGIN, with its own local variables, which is rarely necessary. (Nested BEGIN blocks are not so rare, but they almost never have local variables need a nested block. Most people here all variables of the function complete together before the first START.)

  If the function always returns the same value when it is called with the same arguments, then Deniz it as DETERMINISTIC; It might make it faster to use.

  There are many good reasons to use a variable as results, but if you don't happen to have one, then you can do this:

  CREATE OR REPLACE FUNCTION Calculate_number
  (
       number1 IN NUMBER,
       number2 IN NUMBER
  )
  RETURN NUMBER
  DETERMINISTIC
  IS
  BEGIN
       RETURN  number1 + number2;
  END      Calculate_number;
  

  Published by: Frank Kulash, October 22, 2010 12:37
  Fault corrected typo (thanks, HM); Added after the remarks.

  Published by: Frank Kulash, October 22, 2010 13:28