CP9 buttons on slide masters do not stay in the back

Similar Questions

• When I create a button "submit" text "Submit" does not appear on the actual button.

  When I create a button "submit" text "Submit" does not appear on the actual button. Anyone know what is the problem?

  Depends on how you file the form. In Acrobat, it has a property to set the appearance of the button. In AA 8, field properties appear as below:

  

  It may vary in other versions (I on other machines), but the basic idea is the same. Need to add the label.

• 6 sec new settings slider switch does not stay on (green)

  Switch used in environments does not stay on (green). When you try to configure the settings of the store, music, Apps and sliding switches books are moving reluctantly to green, stay green for a second or less and then back to white.  I want these settings to stay 'on' (green).

  Check

  Settings > general > Restrictions > accounts > allow editing (checked)

  Note, you must enable restrictions to see/do changes.

• Back button on slide show works not properly?

  Hey there ' All,.

  I am currently working in Flash Professional CS6 using a sheet AS3 thing... I'm incredibly new to Flash, and I met a google problem could not solve.

  Here's my project (not in his own dimensions on the screen, so please ignore the rasterized images): http://myfirstphp.hostzi.com/slideshow2.swf

  So, the goal was to tween transparency each photo that will loop continuously. I wanted to also add, back, pause and play buttons that appears when you move the scene. Well, I have everything works except the back button.

  For some reason any to my insue, whenever you hit the back button a few times (more than twice or you click the next button and then the back button), he is not back. It's as if the button is not reload on the appropriate framework. Strange for me.

  The next button seems to work perfectly, however. So why just the back button? I do not know!

  I have my flash project implemented in the following way (maybe it's not the most effective way, but I couldn't find another way to do it; I hope this makes sense):

  Each photo is in its own layer. Each layer is interpolated transparency. The layers are staggered in order to blend into one another.

  I have two layers of action.

  The first layer of action has my channel playback, pause, and alpha. This key frame encompasses the full slideshow. Here is the code:

  pause_btn.alpha=0;
  play_btn.alpha=0;
  forward_btn.alpha=0;
  back_btn.alpha=0;
  rectangle_btn.alpha=0;
  
  
  stage.addEventListener(MouseEvent.MOUSE_OVER, mouseOverHandler);
  stage.addEventListener(MouseEvent.MOUSE_OUT, mouseOutHandler);
  
  
  function mouseOverHandler(e:MouseEvent):void
  {
            pause_btn.alpha=1;
  play_btn.alpha=1;
  forward_btn.alpha=1;
  back_btn.alpha=1;
  rectangle_btn.alpha=0.5;
  }
  
  
  function mouseOutHandler(e:MouseEvent):void
  {
            pause_btn.alpha=0;
  play_btn.alpha=0;
  forward_btn.alpha=0;
  back_btn.alpha=0; 
  rectangle_btn.alpha=0;
  }
  
  
  
  
  play_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
  
  
  function fl_MouseClickHandler(event:MouseEvent):void
  {
            // Start your custom code
            // This example code displays the words "Mouse clicked" in the Output panel.
            play();
            // End your custom code
  }
  
  
  
  
  pause_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
  
  
  function fl_MouseClickHandler_2(event:MouseEvent):void
  {
            stop();
  }
  

  My second layer action has my buttons next and return to them. I have a new image of action relative to the opening of each interpolated image. Here is the code for one of keyframes (Note: the only thing that changes are the numbers for each key frame):

  forward_btn.addEventListener(MouseEvent.CLICK, click1);
  
  
  function click1(event:MouseEvent):void
  {
            gotoAndPlay(21);
  }
  
  
  back_btn.addEventListener(MouseEvent.CLICK, click0);
  
  
  function click0(event:MouseEvent):void
  {
            gotoAndPlay(229);
  }
  
  

  I don't know what else you all need to help me solve my problem, so I guess I'll just check in the morning thank you very much in advance!

  You do the same thing you've been originally... creating several headphones for the button.  You just need the functions defined once in the first picture where the keys begins.  This layer actions must extend to the entire length of the timeline so that the variables and functions are available throughout.

  Instances of the button can increase the full length of the scenario without the need to have more than one keyframe for them.

  Framework 1

  var nextReference:Number = 21;

  var backReference:Number = 229;

  forward_btn.addEventListener (MouseEvent.CLICK, click Next);

  function clickNext(event:MouseEvent):void

  {

  gotoAndPlay (nextReference);

  }

  back_btn.addEventListener (MouseEvent.CLICK, clickBack);

  function clickBack(event:MouseEvent):void

  {

  gotoAndPlay (backReference);

  }

  Other images:

  nextReference = 46;

  backReference = 253;

• Slide branching is not to break the selection button

  I created a main Menu slide that has buttons for the selection of 3 series different slides to create a branch to. I have labeled the slides of the destination and identified the instructions of branches on each button. When I saw the project, the main Menu slide shows for the time display, and then continues to the next slide in the sequence without stopping to let the user select one of the 3 buttons to continue. I tried a different combination of the Action options for the slide menu with the same result. Any advise? Thank you!

  you have a break at least one of your buttons?

  There is an option in the properties of the button to put it on pause to a number of sections.  Without this pause the slide plays just, as you can see.

• Site footer do not stay in the Center.

  Hey guys,.

  With this site... I say 'what! I was able to create nav - bars and all! You have helped me more than I could have hoped for! So, thank you all!

  I'll just have a little problem... Which I'm sure is very common... my footer is not stay in place in the middle... I mean, I know there are all these ways to fancy for a footer, etc... Yet, is it OK the way I... I do this by placing it in its own div, not with the container or the content div... He sit at the bottom of the page for my taste, while I can't seem to stay focused.

  (Note: it does, however, look perfectly centered on my 'Design' overview on Dreamweaver, but when I go to preview it in a browser, it sticks a little too left.)

  Below the following code HTML and CSS coding:

  The HTML Code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < link href = "css/global.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "css/textstyles.css" rel = "stylesheet" type = "text/css" / > "

  < / head >

  < body >

  < div class = 'wrapper' >

  < div class = "header" >

  < / div >

  < / div >

  < div class = "nav" >

  < ul >

  < li > < a href = "#" > Contact < /a > < /li >

  < li > < a href = "#" > Foundation < /a > < /li >

  < li > < a href = "#" > Photos < /a > < /li >

  < li > < a href = "#" > bands < /a > < /li >

  < li > < a href = "#" > home < /a > < /li >

  < /ul >

  < / div >

  < / div >

  < div class = "content" >

  < / div >

  < div class = "footer" >

  "< img src="images/images/footer_03.jpg "width ="825"height ="81"alt ="Footer"/ >

  < / div >

  < / body >

  < / html >

  CSS coding:

  @charset "UTF-8";

  / * CSS document * /.

  {body

  margin: 0;

  padding: 0;

  background-image: url (file:///H|/EXTRA%20RMIT%20FILES/Clarkefield%20Website%20Site/images/Clarkefield%20Fes tival%20Background.jpg)

  }

  . Header {}

  Width: 827px;

  height: 579px;

  left margin: auto;

  margin-right: auto;

  background-image: url (.. / images/Clarkefield%20Header.jpg);

  background-repeat: repeat no.;

  background-position: center;

  }

  . Wrapper {}

  Width: 827px;

  left margin: auto;

  margin-right: auto;

  }

  . NAV {}

  Width: 679px;

  height: 78px;

  left margin: auto;

  margin-right: auto;

  }

  . Happy {}

  Width: 827px;

  margin: auto;

  height: 750px;

  background-color: #225b6f;

  padding-bottom: 20px;

  }

  .footer {}

  margin left: 86px;

  margin-right: auto;

  float: none;

  }

  . NAV ul {}

  list-style-type: none;

  margin: 0;

  padding: 0;

  Width:100%;/*this it will be the entire width of the container * /.

  }

  .nav li {}

  float: left;

  margin: 3.5px.

  padding: 0px;

  }

  .nav li a {}

  display: block;

  do-family: Arial, Helvetica, without serif.

  do-size: 14px;

  text-decoration: none;

  text-align: center;

  Background: url (.. / images/button.gif) no - repeat top left;

  Width: 128px; / * Enter width here * /.

  height: 77px; / * Enter the height here * /.

  color: #FFF; / * Enter the color of the text here * /.

  }

  Sorry for all the hassle, it is an assignment of the University and I'm very worried about getting everything that fact .

  A big thank you, guys!

  -Joshua.
  

  Your footer is not in the #wraper on the one hand:

  
   
     

   
     

  see how you close the #wrapper div right after the #header.

  If you lose the balance #wrapper provides:

  . Wrapper {}

  Width: 827px;

  left margin: auto;

  margin-right: auto;

  }

  There is also an additional right after your div "nav":

  Home

  
    
    

  The second is extra... without closing anything.

  It is advisable when coding to put in to any element closing tag as soon as you have finished the opening tag.

  Thus, for example, put in your tag #wrapper opening and then put in the closing #wrapper tag before putting anything in #wrapper.

  Now if you use #wrapper in the normal way... it's to 'Pack' all the content... then everything... everything must be placed between the #wrapper opening tag and the closing #wrapper tag.

  Now you add content in the main envelope, all encompassing

  dash of each nesting level. So when you nest a deep level, indent the code to see what content inside that visually. Next level of nesting gets back once more.

  That practice, as well as to always add the closing tag a few lines below the opening tag at the same time the opening tag is created, you will help keep content in the appropriate container element and eliminate extra opening or closing... tags their locker always in pairs.

  Best wishes

  Adninjastrator

  PS: after trying to decypher the

  structure of another post, I would like to add one thing to 'always create '.

  Pairs of opening and closing tags. Add a comment just before the tag closing for you remember who

  you close... like this:

  Of course, it helps when problems later.

  Post edited by: adninjastrator... added more instructions

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• the mouse jumps everywhere, do not stay in the same place in Vista

  my mouse (pointer) guard jumping around and I can't keep it in one place

  ·       You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Device right out of windows and sliding bottom don't work in all applications. In the pictures folder slide bar does not remain in the position. It slides up. How can I fix it?

  The cursor does not work in all applications.  I was allowed in word documents.  When I click on the connection box, I don't get the drop down with choices; the choice will Flash and then disappear.  A spreadsheet in Google docs, does not work with the cursor.  the window opens to the right and if I drag the slide to the left, it slides back just before I can select one cell.

  I tried to empty the caches and history (successfully, I think).  I use Mozilla and Safari.  Gmail was my first instance of the problem with th elog-in box.  Now, the problem seems to be spreading.

  Hi Kenypat,

  A. - what happens with internet explore?

  B. what applications like Excel, Notepad, etc.?

  You try to run a scan for viruses on your computer and check if the problem persists.

  http://www.Microsoft.com/security_essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If the problem is with other browsers, you will need to communicate with them in that regard.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sticky notes do not stay in the same place

  I have Post-it notes on my desk.  When my computer is turned off or goes into sleep/hibernation mode they come but not where I had placed.

  Hello
  If the problem does not persist in the new user account, this means that the user profile is damaged.
  Try the following steps to try to repair corrupt user profiles:
  Fix a corrupted user profile:
  http://Windows.Microsoft.com/en-XM/Windows7/fix-a-corrupted-user-profile
  If the corrupted profile is not repaired, you can use the new account profile as an administrator and still be able to use data that are present in the corrupted profile.

  Also try uninstalling and reinstalling the sticky notes by following the steps mentioned below:

  1. first of all, quit the application.

  2. then, go to the Windows programs and features Control Panelsection.

  3 selectPost - it® digital Notes , and then click the Uninstall button

  4 restart the computer.

  5. follow the same step and instead click on uninstall, click on install.

  Check if the problem persists.

  Create a new user account will not damage your data. Check the steps mentioned below to transfer or move data to a new user.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. log in as one user other than the new user that you created or the user that you want to copy the files.

  2 Open Documents by clicking the Start button, click Documents.

  3. click on the Tools menu, and then click Folder Options.

  If you don't see the Tools menu, press ALT.

  4. click on the view tab, click files and hidden folders, clear the Hide protected operating system files check box, and then click OK.

  5 navigate to the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all files and folders in this folder, except the following files:

  o Ntuser.dat

  o Ntuser.dat.log

  o Ntuser.ini

  7. click on the Edit menu and then click on copy.

  If you don't see the Edit menu, press ALT.

  8. Locate the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. click on the Edit menu and then click on paste.

  If you don't see the Edit menu, press ALT.

  10 sign out and then sign back in as a new user.

  If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

  Check the link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

• date and time clock will not stay set gose back to 1999

  time, back gose to 1999 after I have so far for 2012 will not stay this is why?

  I posted when there is no answer here, so I don't think mine is a double post.

• my logo will not stay in the corner

  In the Loo Loo model will not stay my logo in the upper left corner.  When it is in the design phase, it is there, but when I saw it, he puts it as close to the middle in the middle of my background image.  Any advice?

  Hello

  Please make sure that logo is pinned at the top of the page to the left as shown in the screenshot below.

  

  Concerning

  Vivek

• Footer do not stay at the bottom of the content

  I'm doing a new site - tomperkowitz.com - and the footer sticks at the bottom of the browser page, leaving a large white space when the browser window is greater than the content. I would like that the foot of stay at the bottom of the content (like the first image below) and do not stick to the bottom of the window (as shown in the second image below.

  I have another site - horizonshades.com - made with Muse where the rest footer as I want, but I don't know what I do different/wrong with this new site.

  Any help would be appreciated.

  

  

  You have unchecked Sticky Footer in the Page Properties?

• Vascular cerebral accidents will not stay inside the artboard

  Hi I'm trying to follow a tutorial from vector.tutsplus.com: /how-page-2 / # http://vector.tutsplus.com/tutorials/text-effects/create-a-vibrant-3d-pixel-type-treatment comments the problem I have is after step 19. The lines that you added will not remain inside the image/work plan. I tried to export the image in jpg format. but it doesn't go away.

  Hope you guys can help me

  

  first give the path of the circle dotted STROKE 20% transparency

  Draw another rectangle to the size of your document, to help visualize what you do give him no fill and nostroke

  Place it above the circle and the background rectangle gradient, but under the text art.

  Select the new rectangle and circle and the filled rectangle degraded to make a clipping path command 7 (Mac) or Conrol 7 (PC)

  Yes you are right that it is not in the tutorial?

• Page not deleted on the back navigation

  Hello

  I have a two page app. The second page has a QTimer put in place in QML. When I navigate back from the page I'm still receive signals of than QTimer in my manager QML/Javascript.

  Why is this happening? Shouldn't the page (with all attached objects, managers, etc.) are removed when the back button has been pressed?

  I would like a clarification on this issue. I don't want to have a memory leak of any in this or future applications.

  You should read the section titled 'Removed popAndDelete function of the NavigationPane' on this page: https://developer.blackberry.com/cascades/documentation/dev/upgrading/navigationchanges.html

  I expect he has documented elsewhere, but that it clearly indicates that your pages of corn are not implicitly be removed...