"Home" button doesn't work is not even with the support contact

Similar Questions

• Why my home button doesn't work sometimes?

  Why my home button doesn't work sometimes? I have to click several times to activate it. I have an ipad 1 month 12.9 pro. Very frustrating. Thanks for any help.

  You can use a virtual Home button. To enable it, go to settings > general > accessibility and scroll down until you see AssistiveTouch *. You want that lights up.

• Home to the host windows group Group 8 Windows 7 not connecting not even with the help of the troubleshooter.

  I just got a win computer 8 and already have a Windows 7 computer, but for some reason any not connecting not even with the convenience of no help at all

  so if you can help solve me this problem please help. When I enter the password is says something like impossible connet to the home group.

  Hi Zpve,

  Let us know a few more things on the issue.

  1 to the computer on which you created the collective housing, Windows 7 or Windows 8?

  2. what version of Windows 7 do you have?

  3. what exactly is the problem you have?

  4. what happens when you try to connect to a home group?

  5. what error message do you get when you enter the password?

  I suggest you go through the links to find out how to create a group of home.

  For Windows 8:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-from-start-to-finish

  For Windows 7:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  You can go through the link and look for possible causes.

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Homegroup: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Get back to us with answers from the EPF.

• Back to Firefox button doesn't work does not correctly when you navigate to the new Site

  When I open a page to a new site that I can navigate forward and backward on this site very much, but whenever I try to leave this site via the back button it shows as if there are no pages beyond this site, like the opening of fresh on this site page. This is driving me crazy so if someone could help this type of person not techno I would be eternally grateful.

  Yes, how the code page tab, you cannot return to the new tab Firefox's built-in page or a page that you want to substitute for it.

  Since this is your home page, you can use the usual methods to return to your home page:

  • Click on the home button in the toolbar
  • Press Alt + home keyboard

  Or you could try a different extension for the new tab page see if that solves it. For example:

  https://addons.Mozilla.org/firefox/addon/custom-new-tab/

  After installing, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the right side, find Custom new tab and click on the Options button.

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See attached screenshot).

  I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Any improvement?

• Left mouse button doesn't work is not on my laptop

  My left button of the mouse is suddenly no longer works on my laptop. Instead of the function of click, she appeared a little icon of 2 triangles with a dot in the Middle, and they were in the circle.  Instead of click, it scrolls vertically on the page.  Now, it does nothing when I click on the left button of the mouse.

  I checked my settings of the mouse and the left button is set to "Click" according to its function, not scroll or anything else. I just started this suddenly, doing without all the parameters being modified.

  Can someone please? It's driving me crazy. Thank you very much!

  PS - I have a Toshiba, but I think this is not the laptop, it's Vista (?)  Also, I have not installed anything recently, etc..

  Hello

  Try the system restore before that happened:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  ================================================

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See Toshiba and Forums Support.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Check with the manufacturer of system support, documentation in line, and/or forums he has probably shortened that
  enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• Press the scroll button doesn't work is not in windows 7

  My laptop is hp Pavilion dv4-1428 and I moved from Vista to Windows 7 last week, but the audio and scrolling on the touchpad do not work. All solutions would be very appreciated.  Thank you

  Sorry for replying so late...

  I did not now how, but I did not notice that.

  A

  Touchpad:

  Uninstall the Synaptics driver given by me, that is not for you model. (If you have other drivers for this device uninstall them too).

  Resources:

  Uninstall or change a program in Windows 7

  Install this driver:

  ALPS Touchpad worm 7.5.1711.118 has for Win7 here

  B

  Audio:

  If it has been upgraded, then uninstall your old audio driver.

  Resources:

  Uninstall or change a program in Windows 7

  If you have installed an audio driver via Windows Update, then go to

  Control Panel-> devices Manager-> sound, video and game controllers

  Find here the IDT. Click with the right button of your mouse and choose uninstall the driver.

  When you make this install this driver:

  IDT sound here for Win7 by HP

• ThinkVantage button doesn't work is not started

  Hello

  I bought a couple of seconds for the W520 hand that accompanies Windows 10.

  LN two machines you cannot interrupt the start-up with the blue zThinkvantage button.

  Research I've done seems to point to this remap after Windows is loaded, which does not at all help.

  Any ideas?

  Thank you

  The Thinkvantage button should launch recovery for the W520 menu. None of these tools of Windows 7 will work on Windows 10 and there is no possibility of mapping of the key in something similar. The W520 is also not on the official list of Lenovo for Windows 10 support either.

  You can always hit F1 to enter BIOS and configuration during the boot sequence screen.

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• Exit button doesn't work is not on the Master Slide

  I have an exit with the attached exit action button on my e-learning project in model of slides, poster so all on all other content model of slides. This, in turn, displays the button exit on any slide I want to add to my project. Is there any reason the exit action attached to this button may not work? Whenever I am in my project to examine, the button never closes the project. It is just click, but does nothing. Do I need to have the action of the button available on the slides to master CONTENT rather than the main model of slides?

  

  @wc @ fmiosa as moderator, I have to ask you to NOT post answers that are wrong or mislead other users of Captivate. I considered that the deletion of your response, but you are going to insult me (new) if I do. When you say "Buttons do not work when, on the model of slides", your response seems to say that you can insert buttons on a master slide, but they never work? This is not good at all: If you can insert a button on a master slide must be a button of form because the other buttons cannot be inserted on a master slide at all. Apparently you missed the appearance of form buttons, almost 4 years ago. They are interactive objects only you can use on slides of masters, you can insert on the first slide and the time for the rest of the project, you can use them on the question slides and slides of score. If you always use the Captivate 5.5 or before, which mentions at least in your response, adding that this could change in future versions

  Why I like the shape buttons - Captivate 6! -Captivate Blog

  Shape toggle - Captivate 6 - Captivate blog buttons

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  1 share = 5 buttons toggle - Captivate blog

  Lilybiri

• Why are my palps buttons doesn't work does not correctly after working fine for weeks?

  I have not touched the site until I heard that there is a problem today. The drop down menus are not displayed to the top.

  
  https://www.appne.NET/events.html

  Sometimes if I hit refresh or publish the site again, they show once again. then, after testing to see if they work, they disappear again.

  I installed at the exit on April 2 to see if it is useful, and it did not.

  I talked to paypal and tested the buttons on their test Web site and they worked very well.

  I do not use the widget in Muse to create... I copy and paste the creator code for button paypal.com.

  Anyone else having the same problem?

  Please help if so. Thank you!

  Mary

  In this case, users click on paypal and cancel, then repeat the same process in the same browser. This can be the reason for the drop down or paypal button problem as browser stores the information each time. If its best to erase browser cookies and then check.

  I would like to know if you want to test me with a specific browser or device.

  Thank you

  Sanjit

• Button doesn't work is not on the website

  I'm a bit new to Flash and have taught me through tutorials. I work with Flash CS6 and created a film and it was exported as a SWF on my site. It works in the test of the program area and buttons to link to the web pages, but when you click on the site they will not anywhere but always get the sounds and make the appropriate button and down actions. Something appear on the tab which is unknown to me when the button is clicked: #. 4zD-Uii5-Cg, I don't know if this has nothing to do with him or not. Also, here is the code for each button:

  {We (Release)}

  getURL (http://www.momandpopsmedicshop.com/ems_trousers.html);

  }

  The Web site that the flash is on: www.momandpopsmedicshop.com

  Help, please!

  Try:

  {We (Release)}

  getURL ("http://www.momandpopsmedicshop.com/ems_trousers.html");

  }

• 9.3.1 IOS ipad 2 repeat button doesn't work is not + Safari questions

  Hi, I am not sure if my problem started with the recent updates on my iPad iOS, but it certainly was a recent development. I can no longer keys and make them repeat. Key repeat is enabled in general/accessibility/keyboard (and I tried different settings; no change) and it works with my Bluetooth (a case of Belkin keyboard) keyboard or the on-screen keyboard.

  Another oddity is that with the Belkin Bluetooth keyboard I can no longer delete whole lines of text in Safari using the command + DELETE or remove one word at a time by using Alt + Delete. I have to delete one letter at a time which is quite painful when there's a lot of text to be deleted. It works normally in my other browsers iPad (I might just switch to one of these other browsers but Safari is the best for my needs).

  I tried "Reset all settings" but that did not help. I also tested it with another keyboard Bluetooth, no change.

  Under settings/general/keyboard, the only things enabled are spell check and turn on caps lock, shift, and that a single keyboard is listed.

  Does all this sound familiar to anyone? I searched a lot of answers but found no other mentioning these particular issues.

  Thanks much for any help you can offer.

  Rob

  Backup on iTunes

  Restore like NEW - no backup

  If the problem is solved - restore backup

• Volume button doesn't work is not with Vista Business

  Everyone knows what software Toshiba should I install in order to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.

  Hello

  Are you could not change the level of sound volume under Vista?

  The problem is that only some unique Vista drivers have been released for Qosmio G20 and not all functions can be used.
  But don t give up Andrej! There is a hope! Thanks to all the forum users who post proposed solutions!

  I found this very long, but interesting and useful article about the installation of Vista on Qosmio G20.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20494

  The user FranciscoJr is a guru of the G20 Vista + Qosnio ;)

  A hint; some of the objects of Toshiba value added package for the G30 can be installed on the G20.
  Install only the selected items. Otherwise, you will have conflicts with the windows Mobility Center.

  Good luck