CQ61-411wm display for a cq57-339wm

Similar Questions

• need CONTROLLER of BUS SM driver for Compaq Presario CQ57-339WM

  Hello Forums HP!

  I would really appreciate if someone can help me with this problem.

  I have a Compaq Presario CQ57-339WM

  Hard drive has failed and replaced. Installed Windows 7 64.

  I found all the drivers here, excpet for the integrated graphics chipset.

  I get the yellow question mark for "SM BUS CONTROLLER"

  I tried the Chipset and graphics drivers on HP, but none works.

  Chipset

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98379-1&cc=us&DLC=en&LC=en&...

  Graphics, I tried & Intel AMD

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98379-1&cc=us&DLC=en&LC=en&...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116435-1&cc=us&DLC=en&LC=en...

  I also watched upward the processor and the graphic information on this page:

  http://support.HP.com/us-en/document/c02522280

  went to Intel page for drivers and none worked.

  Heres directX Info:

  Intel Celeron CPU 1.5 ghz B800

  Intel HD Graphics Family

  Hello:

  You don't need the Intel chipset driver to install the smbus controller.  You may need to install it manually.

  Give this one a try... auto install.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019

  Manual installation if auto installation does not work...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20018

  Download and unzip the file.

  Go to Device Manager and click the controller smbus needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

• Drivers for modem LSI HDA for Compaq CQ61-411WM

  Hi everyone, I recently bought a CQ61-411WM laptop.  I loaded Windows 7 Ultimate 64 bit on the laptop, even though I know that HP does not support the Ultimate, just the version version Home premium to Windows 7.  When I did this upgrade to Ultimate, I lost the modem, and I still can't get it to work.

  None of the modem Agere/LSI of HP drivers work on this system/modem.  So, I ordered the HP restore disc and guess what?  You heard me right.  The modem has not been installed.  And the recovery discs are supposed to contain all drivers.  Well it did not contain the modem drivers, but they obviously did not work, because it was not installed when you have completed the recovery.

  I extracted the modem drivers on restoration with 7-Zip drive, which can read at the BASE. WIM file and all other files on the recovery disks.  It did not work.  I am at a loss here.  I have high speed internet, but I have this modem operational, because I use this computer for work, and when I lose my ADSL connection, the modem is my backup.

  HP seems to be of no help either.  I also tried sp45229.exe, and it DOES NOT WORK.  Here's the code provider, device id and the id of subsystem for the modem on my computer... Vendor ID is the device ID 1 11 is 1040 and the subsystem ID is 103C363F.  In addition, number 363 is the model of system/motherboard.  I heard that the subsystem ID does not correspond to the. File INF of the software accompanying modem, it does not install or is not installed correctly. I looked in the. LSI software INF file, and there is no id corresponding to this system/modem in the HP Softpaq SP45229.exe subsystem

  There is NOTHING anywhere for this modem.  HP needs to get off their duffs and DEVELOP a DRIVER for this modem on this computer model.  There is no excuse as to why I would not be able to re - install the modem under Windows 7 Ultimate instead of having to comply with the home edition of Windows 7 Premium sucky.  I develop software, but I don't have the time to deal with Scripture, the drivers and all.  I have other things to worry about.

  Here is the entry for this modem device manager: HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C363F

  Maybe this is why I'm having no luck.  Also, I should note, that the Manager of devices and Windows 7 operating system as a whole IS NOT AUTOSCAN for HDA modems.  You MUST have the RIGHT driver for the installed do or there are no go!  Nothing found for it on Windows Update either.  So, I am S-O-L or what?  Please advise me on this situation.

  I'm sorry for everyone is a moment that I lost.  It turns out that my card in this computer modem is burned up.  I found one for the computer, but it is a map of modem Agere Delphi D40 AM5.  I think that the current excessive loop on the phone line or a storm came out the modem.  So I'll reduce the loop current voice, and I'll keep unplugged so that a storm happens.  I'm surprised it didn't get out the computer.  I'm lucky!

  Now, to get the modem and download the drivers installed, it should detect it immediately.  It does not detect a modem blown well! Laughing out loud

• the search for drivers for a compaq presario cq57-339wm pci

  I'm looking for drivers for a compaq presario cq57-339wm pci. I have no internet and were in section hp driver and can't find it. someone would be so kind as to send me to the right place.  Thanks in advance Lewis

  You are the very welcome.

  You need this driver for the controller of communication simple pci:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101536-1&CC=US&DLC=en&LC=en&os=4063&Product=5111985&sw_lang=

• Docking for Presario CQ61-411WM

  I have a guy at work who want a dock for its Presario CQ61-411WM. Is there something available that is compatible with this laptop? I use and do nothing on Docking Stations.

  @Saturn865

  Hello

  Saturn865 wrote:

  Maybe I'm missing something but I don't see any docking port female on the lower part of the computer as it shows in the HP Docking Station reference Guide.

  False documents are added to this Docking Station.

  This unit will be connected to your laptop via the USB cable (it will be in the box).

  One end of this cable is pluged in your laptop and the second to the Replicator of Port HP USB Media (Docking Station) which will be docked to the rear part of HP Notebook Stand. Below is shown the photo that illustrates this situation:

  

  Above the screen is taken from the document from HP that show how to set up this device. You can find it here.

  I found on the movie from YouTube on the HP USB Media Docking Station.

  At the beginning of the film, author it decompresses and describes each of its parts.

  Then, it shows how it looks / works with HP dv6, Lenovo IdeaPad and HP mini 210.

  I write below:

• CQ57-339wm driver does not work

  I work with someone who has a CQ57-339WM (serial 5CB2050K51, product QE264UA) that is out of warranty and had a faulty hard drive. They do not have to burn recovery discs.

  I reinstalled Win 7 Home, installed the current ethernet driver, made all the important updates Win 7. I then started trying to get the wireless to run. I installed the Realtek driver and I can get the light on the keyboard to toggle the white amber.

  1. when I look at all of the network connections, he says he's there, but not connected.

  2. the properties of material shows "the device functioning.

  3 when I do a diagnosis on the connection, windows responds with "there could be a problem with the driver for the wireless network connection card.

  4. I do the ' try these repair as an administrator "and get"the wireless network adapter problems. "

  So, how to do a good install driver for this device.

  I have to mention that I tried the other two drivers listed for this model and installers wireless just nonsense without any message, so IO am assuming that this realek driver is good. It is the only one that will be installed.

  Thank you very much.

  I had already deleted the driver and reinstalled, but was not any available radio to do as you suggest.

  But, I have re - reinstall Win7 and then installed the wireless driver that you accessed as the first thing (before the wired pilot, before the windows updates).

  I now have a working wireless network!  Do not know what has been breakinbg the driver, but this sequence worked better than what I have described in the opus

• Compaq Presario CQ57-339WM: cannot get to Bios or open a session

  My sister-in-law comes from him gives his mobile wife, (the wife passed away). Says I need administrator or boot password. Can't the same Bios I tried all troubleshooting. F keys do nothing. I have a Windows 7 disc, but can not go to the Bios so that it can begin. Help, please! Compaq Presario CQ57-339WM. tried everything. System off Code 71697032

  Hello

  You are welcome

  There is a general policy on the Forum do not provide methods to bypass the Windows log-on passwords, but a local computer store would be able to do it for you.

  Another option would be to reset the laptop to his "factory Condition" and then set it upwards from the beginning - if you do not have a set of recovery media, the laptop are shipped with a recovery Partition which is accessible at the start - that is to say stop the laptop, then start typing away at f11 as soon as you turn on.

  A comprehensive guide on this can be found on the following link.

  http://support.HP.com/us-en/document/c00006110#! & AbT1% 3Fjumpid = hpr_r1002_usen_link1

  Kind regards

  DP - K

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• Compaq CQ61-411WM arrived with a QA software installed.

  I took place a Compaq CQ61-411WM last night and was greeted to a rather strange surprise initially turn it on.

  The laptop has a w/out unique user account a pwd named "OP8", and from the opening of session he immediately embarks on a host of Test/QA applications and attempts to connect to a number of network drives.

  There is no recovery partition and no software pre-installed at retail, either. It seems to be a stripped Win7 install with that device drivers and software QA.

  Applications installed out of the box include:

  "EDT x 86 v4.420 for Windows, Linux, and HP - UX MeatGrinder" which reads as follows:

  Confidential HP *.

  EXCLUSIVE NOTE
  This software contains confidential and exclusive information to Hewlett - Packard Company.

  It should not be reproduced in whole or in part, transferred to other documents, or disclosed to third parties or used for purposes other than those for which Hewlett-Packard has expressly granted rights without the prior written agreement of Hewlett-Packard.

  ************************

  "AMD ThermNow! 5.2 CONFIDENTIAL AMD - prior Information of the tool"

  "AMD GPU Clock Tool.

  As well as a large number of applications with the logo of Quanta (the manufacturer) with similar disclaimers.

  The system time is set in Beijing and parts of MP3 audio test app featuring a woman singing in Chinese!

  The unit arrived this way sealed factory and had not been opened before.

  So far, I have been reluctant to call the HPQ telephone technical support, primarily because it is a rather unusual question (I hope).  I'd much rather do not return the unit to the retailer, as it was the last one in stock at the time.

  Any suggestions on where to go with an issue like this?  I'm perfectly ok with the lack of pre-installed applications (it's quite nice, actually), but I'd rather have an OS/Recovery DVD on hand in case it is always necessary.

  For discs Contact HP recovery. Tell them that you can't play due to the lack of HP Recovery Manager ~ ~ ~ should be free.

• Upgrade of CUP CQ57-339WM

  1. number and product name
  Upgrade of CUP CQ57-339WM

  2 operating system installed (if applicable)
  Windows 7 Edition home premium

  3. error message (if any)
  None

  4. all changes made to your system until the problem occurred
  NO.

  MY QUESTION:

  I was wondering that if I could upgrade processor my computer there a celron in it that is 1.5ghs and I'm planning on upgrading to what compadable around 2 or 2.4ghs is it possible to do?

  Hello:

  Here is the link to the service manual for your laptop.

  Processors support Intel are in Chapter 1, pages 1 and 2.

  http://h10032.www1.HP.com/CTG/manual/c02948186.PDF

  Paul

• Compaq Presario CQ57-339wm: I can swap different CPU into a model motherboard Celeron?

  Hey all,.

  I have a laptop Compaq Presario CQ57-339wm requiring a logic board replacement. According to the sticker on the Palm, it has an Intel Celeron processor clocked to Interior.

  According to the CQ57, the motherboard service manual I ordered (reference number: 646177-001) is "for use only with the computer models equipped with an Intel Core i5 or i3 processor processor and a graphics subsystem with UMA video memory.

  Since I have a Celeron CPU and motherboard instead, would replace this motherboard for the work of the Board of Directors i5? I think that the mobo, I ordered does not include a processor i5, just the current Board. I could swap the chip Celeron of the old Council to the Board of Directors i5, or that wouldn't work either? I have to install a compatible rod that matches the part number of the old mobo? (646174 001).

  If it won't work, I return to the Commission, as I have not yet opened and order a compatible card. Moreover, if the installation of the Board of Directors will work, and I just need the compatible CPU, I could order one that would correspond to the reference, like this eBay i3.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  I think that you understood. The Celeron and Core Intel models use a different motherboard with a different chipset and processors cannot be exchanged.

• Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Advice appreciated!

  No, you can't.

• Can I use an iMAc as an external display for Windows laptop?

  I will be working from home for some time and have received an old laptop Lenovo. The screen is quite small. Is it possible to use my iMac 21.5 "fairly new as an external display for your laptop?

  Thank you

  Kyle

  Sorry to be the bearer of bad news, but this is not supported. The feature you're talking about is called target Display Mode, Apple is extremely clear on what systems are supported in use your iMac as a display with the target - Apple Support Display Mode.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Compaq Presario CQ57-339WM disabled bios password system

  I have a Compaq Presario CQ57-339WM and it does not start.
  I tried to restore it, but I can not enter the bios to boot from the CD.
  
  He said disabled system 67912930 after 3 failed attempts.

  Help!

  Try > 78670316