Crackling throughout the multi-lane

Similar Questions

• The multi site bookmark

  Is it possible to insert a bookmark of the multi site? For example, a click opens 8 sites/tabs. If so, how is this installer?

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  {Ctrl + click} works like the Middle-click.

• Satellite Pro R50 - B - not able to find the ethernet LAN driver

  I'm working on a windows 7 64-bit Image for the portable Satalite Pro R50 - builfing B.

  I can't locate the Ethernet adapter at all.
  I tried all the downloads of drivers on the official website, but nothing works.

  There is no unknown device in Device Manager and there is no other than the wifi network adapters those. Ethernet is enabled in the BIOS.

  The building had been tested on 8 different cell of the same model so not just a case of port defective. We plague equine laptops were build with Windows 8 and works very well.

  Any suggetions?

  All the drivers, but also the Realtek LAN driver (Win 7 32 bit 64 bit and Win 8.1) can be downloaded from the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  I think that the laptop was equipped with the Realtek module and the driver from the driver page should work.
  But you can also use the mini PCI database to find out more information on this module.

  HowTo:
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Have you tried to install the driver in Device Manager?

• NB - how to activate the multi gesture?

  Hello world.

  When I unboxed the laptop and turn it on the first time, multi gestures functionality worked well...

  Although I can turns off this feature because no longer works.

  How can I enable this feature again?

  Cheers!

  Hi dinistic,

  Can you tell us what laptop you have exactly?

  The function of the multi gesture has something to do with touchpad have you checked if multi-function gesture is enabled in the driver for the touchpad? You can check in Control Panel > mouse > advanced

  In the worst cases, need not to reinstall the driver touchpad but that s no problem I think Isn t it? ;)

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Camileo H20 - strange noise throughout the video

  Hello.

  I today received delivery of my first camcorder, which as the title suggests, is a Toshiba Camileo H20.

  Overall, I am impressed with this little camera, but there is a problem that concerns me. After reviewing a video of test, I created to see what the quality was as I noticed a strange sound throughout the video. I struggle to describe, it's a bit like static/interference. The thing is that I already have some tests to find out what could be the cause of it, and I found nothing. Again, the camera records audio as usual, but this static/interference is there with her.

  At first I thought it's maybe because I'm close to electronic devices such as a TV and a PC, so I went in my new garden and filmed there, but noise persists. Then I covered the microphone to see if it makes a difference, but it didn't. I also tried different video modes, leaving the camera on a desk to record walking around a room and then I even resorted to transform a sound recording off altogether. The strange thing is that the camera has always been that noise when I play the video on my computer even if no sound is registered.

  I have a slight suspicion thinking he made this noise if the camera is moved. But if I remember correctly it makes the same noise when it was not moved on the desktop.

  Someone at - it ideas on how to solve this problem? Preferably not by reference. I would like to, but I don't have time because I'm going on vacation next week and I want the camera to do this.

  Thanks in advance.

  I'm downloading two videos on YouTube in VGA mode and 720 p. Once they are uploaded I will edit this post with the links.

  HD:
  http://www.YouTube.com/watch?v=EqxzQi5G0Sc

  VGA:
  http://www.YouTube.com/watch?v=9fMjfIqK09Q

  Quality cannot be correct because they have just the end of the download.

  Hello

  I have no idea why this strange sound appears, but I found in the manual of the user an interesting point.
  You can disable and enable the sound of keyboard and operating noise.
  In Submenue setting, press the button to go to the audio menu. Use the left/right keys to select ON or OFF. Press the menu button OK to validate the settings.

  The other point is that you said that this noise appears when you play the video on your computer. Maybe it's just a s codec problem.
  I remember that the sound on my movies created with the HD cam is really strange questions wore on the package of codec missing on my laptop. In addition, the player didn't manage HD sound.
  I chose the stereo settings and then the sound was ok

  I'm not very well if this might be a reason in your case but it s m worth a try
  Check the sound configurations and try to install some codec packs too

• Satellite A200 - can connect to the network (LAN & WLAN) but no Internet

  Hi all

  I have a problem very annoying and confusing.

  I've just set up my internet connection at home. From the beginning, my Toshiba was unable to properly communicate with the router to set up the connection, I had to use Mac. my partner

  After much time spent talking with the ISP and the manufacturer of the router, I was told that there is a problem with my network card - it is not compatible with the router. I don't think that this is the case, my laptop is fairly new, newer than the router actually. So, it seems a logical explanation. As this laptop was able to connect to every other internet connection as needed. And more importantly, my phone can communicate with the router as I can connect 'local only' but not to the internet. I get an error that can not diagnose Vista.

  Device Manager shows that my wireless and ethernet devices are working properly.

  My network settings are also on the parameters required by the router.

  I'm at a loss total, and personal support from my ISP and DLINK (manufacturer of the router). Any help / advice would be GREATLY appreciated!

  Thank you

  Edward

  Hello, Edward

  This explanation of compatibility is for me nothing else good joke. I use PC Toshiba laptop for years and none of them has a few special network adapter.

  Can you please as first step test the functionality of connecting your laptop to another router? Maybe some friend of you can help.
  When you connect your laptop using the cable LAN is green LED on ONE LAN port?
  You see a flashing orange?

  Do you have access to the settings of the router using internet explore on your Satellite A200?

• Windows xp on te2000 cannot detect the wireless LAN card

  I have a portable te2000 that the wireless lan card is detected as PCMCIA MTD-0002.
  I downloaded the drivers, but once again I installed windows will not use it. I get the error code 10.

  How can I make it work?

  The wireless port is enabled, but it has an orange light (not green) no idea why?

  Thanks in advance
  Ken.

  Hi Ken

  Use this original device ORiNOCO Mini PCI Card (comes with) or if you use an additional card? The unit is pre-installed with the original recovery CD?

  According to the specifications of error 10, you should try to update the WLAN driver.

• Update the wireless LAN, satellite 5200 701

  Hello
  I have laptop Satellite S5200-701 and it has built in Bluetooth (PA3121U_1BTM), also wireless device evolving as written in the book loads. Now I want to move the wireless LAN and I have this tip:

  I need to change my Bluetooth device with another which has two facilities (Bluetooth & Wi Fi) or I need to upgrade the software only?

  If necessary to use the different device, how this device connects to my note and what is the serial number?

  Hello

  You re right. The laptop is scalable WLan. As Lucky has already said you need a card WLan minPCI like this:
  PA3212U-1MPC wireless LAN card

  At the bottom of the unit, you should find a cache location WLan, which is fixed with a screw.
  Here, you can connect the minPCI wireless network card to the Board of Directors. 2 cables must be connected as follows:
  White HAND and the black cable to THE

  PS: You can switch between BT and WLan with FN + F8

• Tecra M3: Cannot connect to the wireless LAN

  Hi all

  Since yesterday I have a problem with my wireless connection:
  When I turn on the without orange wire the led light show but on the network connection, the message is: 'Not connected' and try on icon Office not start and display a red cross.

  Why? Where is the problem?
  I have upgrated readers... but not found
  Before yesterday, the connection worked fine.

  Help me please :-((

  Thank you

  Hello

  I put t know what icon on the desktop you want to say but perhaps you intervene on the Wlan icon that appears in the taskbar.

  In any case, to establish a connection to the wireless LAN laptop side switch must be enabled and you must also use the FN + F8 key combination to switch to the WLan.

  Did you check that?

  By the way; If there is a software problem, I recommend to use the System Restore tool and reverse the operating system to the beginning.

  Good day

• Tips on sound crackling on the P100-188

  Hello

  If you have a P100-188 and meet crackles with the sounds of alert windows (you can check this by opening the sound volume on the taskbar and adjustment button continuously clicking on the volume), and to a lesser extent with music and other applications, it can be interesting to contact Toshiba. I sent an email to the technical service of Toshiba to [email protected] explaining the problem that I had and wonder they were aware of it, as one or two other people have experienced the same symptoms. They sent an email back asking me to contact the Toshiba global support on 0870 066 0191 Center to get more help and technical advice. On this operation a support assistant asked me to reinstall the audio drivers, I did without success, the crackling sound was always apparent, so I am now waiting for the mail to contact me to send my laptop in for repair of.

  The noise problem was not bad and I contacted only Toshiba in order to know if they were aware of the problem and working on a solution, thinking it was driver related as it occurred when using the speakers and headphones. Now it seems that it is hardware related and only repaired by heart open syrgery.

  I hope this helps other P100-188 owners with the same problem.

  Hello

  This problem will be solved after update bio and installation driver latest version Version 3.11.0.51 sound.

  Good bye

• Fetch the multi-record acquisitions takes too long

  Hello

  I need to improve the performance of my code in multi record acquisition on the following system.

  LabVIEW 2009, Niscope 3.5.2 map 5122 digitizer on the PXI-1042 with PXI-8106 controller connected to the host PC Dell Optiplex 380 with 4 GB of RAM by crossover cable.

  I tested the speed of transfer of my connection to the chassis using the niScope memory transfer Rate.vi Maximum flow, the result was 110,74 MB/s.

  I need to use the scanner to get the waveform of different seismic sensors and it should be as fast as possible to get different transducers in a reasonable time. I used the Multi files get VI to monitor the rate at which the code executes. I want to acquire 30 signals with 10,000 record length to 100 MECH sampling rate. / s.

  Extraction of 30 records with 10 000 record length takes about 300 ms, that is far too long for my experience. I tried different numbers Records and found that the code takes 10 milliseconds per registration type. I've found that extraction vi takes most of the time. I ran my code both recording Multi search vi. Two sleeves at the rate which is not satisfactory for my application. I appreciate if someone can help me solve the problem.

  Thank you

  Ahmad

  .

  I found that on the pulse generator FRP was set at 100 Hz, which means it sends the impulse evey 1/100 sec or each 10 m I think the program was waiting to acquire the signal. I changed the FRP at 1 K Hz, it became much more quickly.

  Thank you

  Ahmad

• Search table for 0 or 1 throughout the course of

  Hello. I have a column of data with 530 000 lines. The only values are a 0 or a 1 (1 represents the occurrence of an event; 0 does not work). I would like to be able to determine the amount of 0 seconds between each consecutive occurrence of 1 throughout the whole picture. For example, I would be able to determine the number of zeros (e.g., lines) between the first and the second 1, the second and the third 1, third and fourth 1, etc., and then determine the average. Using 1-d search function array makes it easy enough to do for a few instances, but I can't find how to search in all the lines of 530 000. Thanks in advance for your help.

  

  MattStock1984 wrote:

  Forgive my ignorance, but implementation of a reading of the worksheet with an indexed table leads to a constraint on the U8 function point and my average output is the size of the array (e.g., length of string). Can you tell me where I'm wrong? I have attached a sample data file that I use.

  
  
  • Nothing wrong with coercion. (However, I told you to convert in U8 in my instructions to your table of preparation)
  
  
  • You have not added 48 as in my code. Why not? (If you add no 48, your delimiter must be defined as a character unprintable special (x 01), making it difficult to read code. (Also, if you do not add 48, the character '1' (ASCII 49!) will never happen and you get the full length as expected).

• Every Pc has yellow ball on the NIC (LAN and WIFI)

  All client computers obtained yellow ball in the NIC (LAN and Wifi) after running GPUPDATE/force on domain controller.

  I've run the gpupdate and all afftected users once again, also
  account has been removed from the ACL of the directory.

  I am the admin of our small network and have never needed to play with the
  GPO before. This problem just happened 'out of the blue"and I would like to
  to resolve what caused it.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home