Similar Questions

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Why it takes too long to open attachments of the e-mail account?

  It takes forever to download attachments from my mail account. I tried to do the following tasks explained on the vista forum: http://windowshelp.microsoft.com/Windows/en-US/help/6b046ae9-1434-4423-9303-400ff6fe686b1033.mspx#ESD, but none of the fixed work possible.

  After clicking on open on the box pop up asking if I want to open or save the attachment, it takes too long to download. The transfer window remains open to showing that he is ready to download, but rest in this window of bhox. I press cancel and try to open once again, if the chance that it opens this file, otherwise it takes forever forceing me to cancel. Very small files most of the time, usually between 50 KB should take seconds.

  I even tried to save the files, but once again the same process. The transfer case remains open but does not download.

  One of the ideas.

  Thanks in advance.

  Hello

  It is not easy to tell exactly what is happening, but it must be something with the e-mail account provider and their page. For me, this case is not a typical problem of Vista, but you can try to find the solution on Vista from Microsoft IT Pro forum.

  By the way: you have an alternative email by another provider address? Is it the same situation?

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran

• SQL query takes too long to run (1 h 25 min)... pls help how to set up the query.

  Hello

  Could someone please help how to tune the query as its takes a long time to retrieve the results.

  Select

  col1,

  col2,

  col3,

  COL4,

  col5,

  col6,

  col7,

  COL8,

  col9,

  col10,

  Col11,

  col12,

  Sum (volume1),

  Sum (volume2),

  Sum (volume3),

  Sum (volume4),

  Sum (volume5),

  Sum (volume6),

  Sum (volume7),

  Sum (volume8),

  Sum (volume9),

  Sum (volume10),

  Sum (volume11),

  Sum (volume12),

  Sum (volume13),

  Sum (volume14),

  Sum (volume15),

  Sum (volume16),

  Sum (volume17),

  Sum (Volume18),

  Sum (volume19),

  Sum (volume20),

  Sum (rate1),

  Sum (rate2),

  Sum (rate3),

  Sum (rate4),

  Sum (rate5),

  Sum (rate6),

  Sum (rate7),

  Sum (rate8),

  Sum (rate9),

  Sum (rate10),

  Sum (rate11),

  Sum (rate12),

  Sum (rate13),

  Sum (rate14),

  Sum (rate15),

  Sum (rate16),

  Sum (rate17),

  Sum (rate18)

  Sum (rate19),

  Sum (rate20)

  Of

  Table 1 - 13, 25, 99, 400 records

  Table2 - 13, 45, 1000 records

  Table 3 - 4, 50, 000 records

  Table 4 - 1,00,000 records

  table5 - 30 000 records

  where tabl1.col1 = table2.col2,

  Table1.Col1 = table3.col1.

  table2.col2 = table3.col2...

  Group

  Sum (volume1),

  Sum (volume2),

  Sum (volume3),

  Sum (volume4),

  Sum (volume5),

  Sum (volume6),

  Sum (volume7),

  Sum (volume8),

  Sum (volume9),

  Sum (volume10),

  Sum (volume11),

  Sum (volume12),

  Sum (volume13),

  Sum (volume14),

  Sum (volume15),

  Sum (volume16),

  Sum (volume17),

  Sum (Volume18),

  Sum (volume19),

  Sum (volume20),

  Sum (rate1),

  Sum (rate2),

  Sum (rate3),

  Sum (rate4),

  Sum (rate5),

  Sum (rate6),

  Sum (rate7),

  Sum (rate8),

  Sum (rate9),

  Sum (rate10),

  Sum (rate11),

  Sum (rate12),

  Sum (rate13),

  Sum (rate14),

  Sum (rate15),

  Sum (rate16),

  Sum (rate17),

  Sum (rate18)

  Sum (rate19),

  Sum (rate20)

  Thank you

  Prasad.

  > Could someone please help how to tune the query as its takes a long time to retrieve the results.

  The query you posted is obviously fake.

  If you ask to give us a request that you do not post and we cannot see.

  For real?

• I chose the trial for InDesign download version and it has been downloading for 30 minutes. It normally takes too long or I did something wrong?

  I chose the trial for InDesign download version and it has been downloading for 30 minutes. It normally takes too long or I did something wrong?

  Clear the Temp / Tmp folder and try again

  Or you can also download the direct download link:

  http://prodesigntools.com/Adobe-CC-2015-direct-download-links.html

  Let me know if you need help

• Inserting data in the remote table takes too long

  Hello
  
  I have a table in the remote database and insert the data into this particular table... takes too long.
  
  Could you please advice me some tips for the DML can quickly...
  
  Concerning
  DAS

  That takes a lot of time, then don't you have an idea how can we send the data fast

  Buy more band witdth?

  No, honestly. As you can see, the quality of my answers match the quality of your question.

  You must locate the bottleneck, where is - this "too much" time has passed.

  Is it
  collection of data on the local side?
  net send?
  Actual insertion on remote site?
  Maybe you have a condition on the remote site, which causes the data sent to the remote side to local?

  Impossible to give advice without knowing anything about what is happening.

  Concerning
  Peter

• How to stop the query takes too long

  Is there a way to tell oracle to stop a query that takes too long to run?
  
  I'm trying to end a way to prevent some users from running any querys that takes more than 2 minutes... any help?
  
  I use 10g
  
  Thank you!

  Hello

  You can create a profile... and limit...

  CREATE a PROFILE prof_low LIMIT
  CPU_PER_CALL 3000 (about 30 seconds)
  PRIVATE_SGA 500K
  LOGICAL_READS_PER_CALL 1000;

  ALTER USER myuser PROFILE prof_low;

  Concerning
  Joao Oliveira

• Executed scripts takes too long

  Hello

  I hope for more help with improvement / reducing the amount of time required to get a script to run. I have provided the following script to our CMDB group but they say it take too long to run (full day).

  I already use the get-view option to extract the details. Maybe someone can advise how they would improve this script. For the record, we have 2000 + vm in our environment.

  Script is attached.

  Any help is very appreciated.

  Hello, VM_.

  Well, nobody likes a slow script, that's for sure.  And a script of the day?  Double boo to that.

  I had a quick glance, and there were some spots of improvement.  I have them made here:

  Add-PSSnapin VMware.VimAutomation.Core
  
  function Get-VMSerial {  ## rewrote to take UUID; already being gotten in properties below  # param([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]$VirtualMachine)  # $s = ($VirtualMachine.ExtensionData.Config.Uuid).Replace("-", "")  param([string]$Uuid)  $s = $Uuid.Replace("-", "")  $Uuid = "VMware-"  for ($i = 0; $i -lt $s.Length; $i += 2)  {    $Uuid += ("{0:x2}" -f [byte]("0x" + $s.Substring($i, 2)))    if ($Uuid.Length -eq 30) { $Uuid += "-" } else { $Uuid += " " }  }
  
    return $Uuid.TrimEnd()}
  
  # Connect to vcenterConnect-VIServer vcenter
  
  #Gathering VM settingsWrite-Verbose -Verbose "Gathering VM statistics"$VMReport = @()$Count = 0
  
  ## no need to use Get-VM#Get-VM | % {## moved outside of the Foreach-Object scriptblock, so this Get-View only gets called once, not 2000+ times (not once per VM, just once at all)$filter = @{"Config.Template"="false"}Get-View -ViewType VirtualMachine -Filter $filter -Property Name,Guest.HostName,summary.config.numcpu,summary.config.memorysizemb,summary.config.numEthernetCards,Summary.Config.NumVirtualDisks,Config.Uuid,Parent,Guest.GuestFamily,config.tools.toolsversion,guest.toolsstatus,config.Version,Config.ChangeTrackingEnabled,Datastore,AvailableField,Value | %{    ## $vm is the View of the current VM    $vm = $_    ## not used -- removed it    # $CustomDetails = Get-VM $_ | Select -ExpandProperty customfields    ## rewrote to use Get-View or UpdateViewData()    # $LunTierStringArray = Get-VM $_ | Get-Datastore    $LunTierStringArray = Get-View -Property Name -Id $vm.Datastore    $LunTierString = $LunTierStringArray.Name -split "_"    $vms = "" | Select-Object VMName, Cluster, DnsName, TotalCPU, TotalMemory, TotalNics, Disks, DiskTier, SDF, UUID, Folder, OS, ToolsVersion, ToolsStatus, HardwareVersion, CBT, Serial    $vms.VMName = $vm.Name    ## rewrote to use UpdateViewData()    # $vms.Cluster = $(Get-vm $_ | Get-cluster).Name    $vms.Cluster = &{$vm.UpdateViewData("Runtime.Host.Parent.Name"); $vm.Runtime.LinkedView.Host.LinkedView.Parent.Name}    $vms.DnsName = $vm.Guest.HostName    $vms.TotalCPU = $vm.summary.config.numcpu    $vms.TotalMemory = $vm.summary.config.memorysizemb    $vms.TotalNics = $vm.summary.config.numEthernetCards    $vms.Disks = $vm.Summary.Config.NumVirtualDisks    $vms.DiskTier = $LunTierString[0]    ## getting this in some other way, from the    # $vms.SDF = ($_ | Get-Annotation -CustomAttribute 'School/Division/Faculty').Value    $vms.SDF = & {$intCustomAttributeKey = ($vm.AvailableField | ?{$_.Name -eq "School/Division/Faculty"}).Key; ($vm.Value | ?{$_.Key -eq $intCustomAttributeKey}).Value}    $vms.UUID = $vm.Config.Uuid    ## add -Property Name, though, with " | Out-Null", does this even work?    # $current = Get-View $vm.Parent | Out-Null    $current = Get-View $vm.Parent -Property Name,Parent -ErrorAction:SilentlyContinue    $path = $vm.Name    do {         $parent = $current         if($parent.Name -ne "vm"){$path =  $parent.Name + "\" + $path}         ## add -Property Name, though, with " | Out-Null", does this even work?         $current = if ($null -ne $current.Parent) {Get-View $current.Parent -Property Name,Parent -ErrorAction:SilentlyContinue}    } while ($current.Parent -ne $null)    $vms.Folder = $path    $vms.OS = $vm.Guest.GuestFamily    $vms.ToolsVersion = $vm.config.tools.toolsversion    $vms.ToolsStatus = $vm.guest.toolsstatus    $vms.HardwareVersion = $vm.config.Version    $vms.CBT = $vm.Config.ChangeTrackingEnabled    $vms.Serial = Get-VMSerial -Uuid $vm.Config.Uuid    $VMReport += $vms    $Count++    ## added Write-Verbose so that the pipeline does not get polluted with strings (for the day that this code is returning objects for further manipulation down the pipeline, instead of going straight to CSV)  Write-Verbose -Verbose $Count}#Output$VMReport | Export-Csv vcenter_vm_report.csv_tmp -NoTypeInformation -UseCultureCopy-Item vcenter_vm_report.csv_tmp vcenter_vm_report.csv
  

  I commented on the changes I made (and why) and commented on by the code I replaced.  Give a run and see if it is not faster for you / your CMDB crew.

  Message has been edited by Matt Boren on February 24, 2015: correction of the piece that gets the path of the inventory of the VM (were able only to return a parent level previously) minor

• HP ENVY 15-j110, takes too long to start

  Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.

  He

  Product number is this #ACJ F6C58PA

  answer as soon as possible.

  This could be due to the application running in the back ground and starting applications. Try

  Selective startup:

  http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7