Crash during transcoding

Similar Questions

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• Satellite A210-15Y crashed during the update of the bios

  The worst case has happened and the laptop computer crashed during an update of the bios. I know that there is the possibility to repait the bios with a tool of recovery from crisis. For this purpose you have to press 2 keys (in most cases FN + B or Win + B) during the connection of the supply cable and the next start. I tried many books, but nothing happened. Can someone tell me the keys on which I have to press a 210 - 15Y satellite and maybe where I can get an image of cd of the tool of the crisis, because the laptop does not have a floppydrive?

  Hello

  As far as I know that the BIOS crisis procedure may be crazy by a technician of the ASP.
  You can not download a version of traditional BIOS who can update the BIOS from a USB FDD floppy.
  You can download only focused on the victory of the BIOS that can be run so that windows operating system is running.

  In my opinion, you should get in touch with a local ASP!

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Dell order configure 3.1.0.250 crashing during export to exe

  Dell order configure 3.1.0.250 crashing during export to exe. I tried on two different machines with the same result. I have .NET Framework installed 4.5.2. Here's the report from crashing Windows.

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: cctkgui.exe
  Signature of the problem 02: 3.1.0.0
  Signature of the 03:559147 c 2 problem
  Signature of the problem 04: WindowsBase
  Signature of the problem 05: 4.0.30319.34209
  Signature of the 06 problem: 5348b4e9
  Signature of the 07 problem: f61
  08:6 problem signature
  Signature of the problem 09: System.InvalidOperationException
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 6d8c
  More information 2: 6d8c9c0d6ed9fe2f95cec4737399f068
  Additional information 3: J183
  Additional information 4: d18349a1ed7c01d977b9ab4c0697af85

  After posting the answer, I tried to create an exe from the package of local system and leading to an accident too.

  And also, when you asked for the model of the platform, if you meant what systems the package will be deployed on, his will mainly be on Optiplex 9020 and 9010 s.

• WMP CRASHES DURING PLAYBACK HD VIDEO

  Mr PRESIDENT, windows media player crashes during playback of 720 p video file type, it becomes white and gray Tower then program stop. and when I open any window during playback of video file, the video hangs.   microsoft patch i run tool for wmp, it detects splitter media halli causes the crash of wmp and the internet. It disables halli splitter. but can not remove it. I installed not separately halli media splitter, or matroska splitter. It is present in the rundll32.exe file. Since it is a system file, how can I remove it? syystem to fail. I installed k - lite codec pack full 5 , how can I solve this problem? Please help me.                                                                                       OS --win 7 home top 32-bit sp1 dell inspiron 15r n5010 quick heal total security

  Hi Somnathroy,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, Windows Media Player crashes when playing HD video files.

  I appreciate your efforts try the troubleshooting steps to resolve the problem. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  Is - it blocks the Windows Media Player only when trying to play a file individual or other files too?

  This problem can occur if the video adapter driver is outdated, corrupted because Windows Media Player or hardware video acceleration settings.

  Method 1:
  I suggest you install the latest video card driver from the manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  If the problem persists, I suggest you try to reduce (or turn off) the hardware video acceleration. Check if it helps.

  a. open the screen resolution by clicking on the Start button.

  b. click Control Panel , and then under appearance and personalization , click adjust screen resolution.

  d. click Advanced settings , click the Troubleshooting tab.

  e. click on change settings.

  Note: some video card drivers do not allow to change settings.

  f. move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 3:

  If the problem persists, I suggest to uninstall and reinstall Windows Media Player.

  Step 1:
  Uninstalling Windows Media Player:
  

  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "turn Windows features on or off". ""
  c. navigate to the features of media and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2:
  Reinstall Windows Media Player:

  
  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "Turn Windows features on or off".
  c. navigate to the multimedia functions and place a check mark in the face of Windows Media Player.
  d. restart the computer.

  Check out the link:

  Turn Windows or turn off features of
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Check out the link for more information.

  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with Windows Media Player, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows 8 crashed during the last update, now wants to save and may not do.

  Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

  Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

  Hello

  This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
  2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
  3. Follow the instructions on the screen.

  Hope this helps

• First crashed during import + ingest

  Hello
  I'm running the 2015.3 new and Premiere Pro crashed during the import process.  Media Encoder has been running in the background, but since he crashed, when I re - open the project, imported files are not in my browser because it crashed until I could save it after 'import' of the files.  I just want to know how I will bring to these files and make them properly related to the proxy file that encoder is already done?  I don't want duplicate proxies.

  Thank you

  It is a very good question - here's what I did.

  Disable (uncheck) interfere in the media browser.

  Import the main elements in the program Committee.

  Once imported, selected clips and a right click and the menu drop down choose Proxy > attach Proxy.

  When the pane to open, Proxy I sailed on the proxies and fasteners, and now the clips are with attached in the column metadata Proxy and work correctly.

  However I had to fix a clip proxy at once, for some reason any (I could have been hurt) reedit automatically, others did not.

  MtD

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.

• program crashes during the routine of the export/media

  My updated Prem Pro CC 2014 continually crashes during export to a 10 minute video.  Content is JPEG, Go pro films and regular movies on top of music file.

  I'm glad I'm not being paid to miss this deadline...

  Thanks for the reply. 15 minutes with Adobe technology support call indicated that a new video driver was needed for my IMac.  I love simple solutions!  Could meet my customer deadline too.

  Mike

• Premiere Pro CC (V.8.0) slow and crashes during playback

  Question:

  Premiere Pro CC (V.8.0) extremely slow and crashes during playback. My video will not play unless I make (which is not a problem). I made all my clips and try to read. It usually allow me to watch the first time around. After that, the program hangs or becomes extremely slow. I even had a blank green screen pop up on my screen. Sometimes, the program will generate the message "a serious error has occurred" and stop. Other times, the program just locks himself. I'm not under all programs except by email.

  Here is what I tried:

  Cleared all my cache files

  The value of my reading of mercury 'software only '.

  After doing the above, restarted the program and the computer.

  Don't made sure I had no RGB curves effect (as I saw it was a question of other threads)

  Remove all unused images

  Delete all files rendering and a new rendering.

  I'm editing of images requiring a Ultra key. I use a Three-Way color corrector. My video is not even 1 minute long, so I think it would be easy return and reading.

  Here's what I'm trying (I know I need an upgrade - hoped after this client project):

  MacBook Pro 2008

  Processor 2.4 GHz Intel Core 2 Duo

  Memory 4 GB 667 MHz DDR2 SDRAM

  Graphics  NVIDIA GeForce 8600M GT 256 MB

  Software  OS X 10.9.3

  Help! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

  I am Windows but I saved some Mac links that can help

  -Next link says After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

  -Activate the user Root Mac https://forums.adobe.com/thread/1156604

  -l' Root user more http://forums.adobe.com/thread/879931

  - and more user root http://forums.adobe.com/thread/940869?tstart=0

• CS6 Indesign crashes during export epub

  My indesign cs6 crashes during export epub. I have windows 7. I uninstalled and installed again, but nothing happened. When I start to export with the kindle amazon program also plugin stops working, theoretically it is not a bug of amazon. What to do. Could someone help? Thank you. I have had no error message.

  I would post your problem in the forum here http://forums.adobe.com/community/indesign/indesign_generalInDesign. They will be able to help you.