Crash suddenly satellite 404!

My satellite 404 sometimes stops during intensive tasks (such as scanning of the hard drive for virussses etc..). When this happens, it stops immediately, without any warning. Someone knows how to fix this?

Thank you

Hello

It is a typical result of overheating. Please clean the unit and try to remove all dust cooling vents. On this way, the device can "take a breath" and will be properly cooled.

Good bye

Tags: Toshiba

Similar Questions

  • Crash on Satellite M60

    Help!

    I managed to crash my Satellite M60-104-re-installed windows successfully - but now Device Manager is to show problems with all other Multi - Media Controller devices, etc. network controller. I don't have the drive of installation etc.
    Any suggestions welcome

    Man, where´s the problem. I see that you can access the internet, so just go to the Toshiba drivers download site and download all the drivers for your computer:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Welcome them

  • Single shot crashes my Satellite R850-169

    Hello!
    I wonder if someone could help.

    Recently, a single shot would break my Toshiba Satellite R850-169 15.6 inches (Intel Core processor i5 - 2410M, 2.3 GHz, RAM 6 GB, 640 GB HARD drive, Bluetooth and Windows7 Home Premium) laptop.

    Purchased in June 2011, so he's coming up to three years.
    Worked fine until about 4 months ago.

    In the past, when I hit the office/computer, I get an error message saying:
    "Vibration was detected. The head of hard drive is temporarily moved to a secure partition"or something like that.

    Now this message rarely turns on and the computer just hangs.
    And I have the Windows 7 Blue crash dump screen/message.

    The computer has so far managed to launch again... but I suspect one day soon, it may fail to do so!

    Does anyone have an idea what could be the problem?

    Is it likely to be a hardware problem? As a wiring loose maybe?
    Or maybe it's a software problem?

    Thank you very much.

    > Now this message rarely turns on and the computer just hangs.

    The message usually appears in the case where some shocks have affected the functionality of the HARD drive.
    In this case, the HARD drive protection sensor stops the HARD drive and moves the head position.

    I guess that your HARD drive is not working properly.
    It could be possible that the HARD disk failure causes the system crashes and I guess that the replacement HARD drive would solve your problems of laptop.

    Recommend to replace the HARD drive and recover the computer laptop back to factory settings.

  • Program to close or crash on Satellite Pro A100

    HAVE THE SATELLITE PRO A100, WHICH I USE FOR MUSIC. I INSTALLED PCDJ AND PROGRAM FROM TIME TO TIME STOP, CRASHES WITHOUT REASON.

    I FOLLOWED THE INSTRUCTIONS TO INSTALL THE PROGRAM, BUT IT CONTINUES TO SE WHICH IS VERY ANNOYING IF I DO A DJ SET AT THE PUB OR CLUB.

    HE DON'T Y HAS NO GROUNDS TO THAT HE CAN STOP AFTER 1 HOUR OR 4 H. CAN SOMEONE AS HELP I HAVE FRIENDS WHO USE IT ON TOSHIBA LAPTOP WITH NO PROBLEMS... PS IT'S NOT PORTABLE THAT BLOCKS ANY PROGRAM...

    Hi AL Karaoke ;)

    For me it s a clear case. Programs crashed due to high temperature.

    > I AM DOING A DJ SET AT THE PUB OR CLUB.

    I suppose that the temperature of the environment is a little higher in the pub or club. In addition, I think that the laptop can not cool properly due to the circulation of air.
    I m sure that the laptop is running properly without any crashes if you are going to use it as a common user. Do not forget that there is enough free space around the laptop for a circulation and cooling properly

  • All of a sudden Satellite A200 will restart

    Hi all, I have a laptop Toshiba Satellite A200 and I have questions with her re-starting all the time.
    I have re-installed windows 7 and each time I do any work, all of a sudden the laptop will restart.

    The problem would be a bad battery?

    It is not easy to say whether this issue has something to do with the battery.
    This happens on the battery only, or supply even when the adapter is connected to your laptop?

  • Browser crashes suddenly using Oracle Applications

    After loging successfully on my personal system when I click on any responsibility his fine work until up to this but when I tried to open any form the browser suddenly crashes and disappeared it was working fine before

    I tried it on Explorer 7 can I update to explore 8 and firefox as well, but the problem is still there how do I solve this problem


    Thank you very much

    Hey mushy,

    I'm glad that you found the solution. EBS uses different versions of JInitiator for different browsers, sometimes they come into conflict with each other, then this type of problem occurs. So try to use Firefox for application. I am also new in EBS and this forum has given me a lot of all its members are very useful. One thing that all of you who are new here to remember is the bottom of the note which encourages others

    "Posters, mind please these common sense rules when you participate here:

    -When you ask a question, give all the details that someone would need to answer. It is strongly recommended to first consult the documentation.
    -In response to a question, please be courteous; There are different levels of experience represented here. A badly phrased question is ignored better that flamed - or better still, help the poster to ask a better question.
    -It is considered good etiquette to the answerers rewards with points (as "useful" - 5 pts - or 'correct' - 10pts).
    -See more tips in the FAQ

    Thank you for doing your part to make this community as valuable as possible for everyone!

    -OTN"

    Kind regards
    Melchiade Aziz Khan

  • Hello! The problem arises following, in advance, tell your browser to default settings, without additions! A crash suddenly!

    Crash of js::RemapWrapper (JSContext *, JSObject *, JSObject *)
    https://crash-stats.Mozilla.com/report/index/090a7cb9-35ad-4405-a2b5-03b8f2140822
    What has caused this bug? I hope for your help!
    Windows 7-32 operating system!

    It seems that it is some sort of wrapper which was nuked, but cannot be assigned to a pointer in the code. This happens regularly on a specific Web site, or with the specific steps?

    It does not look as if it was a large breaker before, so I don't have an estimate when it will be fixed, or what is the cause.

    It is possible to try to disable each of your extensions to see if this is an extension. If you have any other questions, happy to help you.

  • Toshiba power saver crash on Satellite A60

    Hello

    I have a Satellite A60-297ITA bought with XP Home.
    Now, I bought a XP Pro and I install reformat all the laptop.
    Then I installed all the drivers downloaded from your site.
    The Installation of pwrsav-sp-a60-xp-70302-en.zip seems to work very well, but on reboot, I get an error:
    A fatal error has occurred. The program will end. Code: 0x7E.
    What can I do?

    Hello nviau

    As you know, it is not possible to create software and be sure that it works correctly in combination with other applications. The best example is the operating system you are using. It is usually many applications have an influence on other processes running, and it is possible that, in certain circumstances, occur a conflict or a malfunction.

    It is not easy to solve this problem, and the best way to solve it is to reinstall the device using recovery DVDs. On this way the unit will be own pre-installed and all tools and utilities work correctly again. If you want to do it back up all your data.

    Good bye

  • Many screens scratched and crashed on Satellite A300-1MZ

    Hi all
    a new problem with my * a300-1mz * :-( I'm very worried...
    Sometimes my computer laptop crashes irretrievably with the inconsolable * screen *:
    [http://www.pctunerup.com/up/results/_201007/th_20100709154926_screencrash.jpg | http://www.pctunerup.com/up/image.php?src=_201007/20100709154926_screencrash.jpg]

    It happens often in the "* put off" laptop * but also when I'm * using other software * (for example with the antirootkit gmer, sometimes crashes with the same screen note)
    I ask for your support to find the problem and its resolution.

    * WITH THIS SCREEN, THE LAPTOP COLLIDED. ANY KEY ON THE KEYBOARD DO NOT WORK (NOT EVEN CTRL + ALT + CANCELLED). *
    * the only solution is a very bad off system *: I press the power button for several seconds until the laptop is not off. I think that this procedure is not too good.

    I hope that there are no problems with my video card: * ati radeon *.
    * mobility hd 3470.*

    * I look forward to your soutien.*

    Hello

    I can give you only a few suggestions;

    First of all, I think you should check if this issue would be seen on the external monitor.
    I guess this won't be visible but it s worth it to check out what
    If it is not visible on the second external monitor then I would say that the problem is related to the GPU (graphics chip).

    Of course updating the graphics card driver and BIOS update should be performed if the updates are available on the European driver Toshiba page

    If doesn't help t update software, then material should be checked by a technician of ASP.

    My laptop went crazy in the past two weeks because of the high temperature too
    In my country we have a temperature of 36 degrees C and cooling modules running all the time to cool the CPU and the GPU then maybe it s a question of temperature

  • Card Flash (TCrdMain.exe) keeps crashing on Satellite L30

    (Running Vista Home Basic on a Satellite L30)

    The utility of Flash cards only really works if I use it shortly after the start of my laptop. Often, I want to change the brightness of the machine after I use the machine for an hour or two, but the utility ignores my attempts to move the cursor downwards on the brightness setting or the watch at lowest setting already (when it is in fact to the max).

    So far, the only solution I found is to restart the machine! I can't yet to restart programs instead - I can track him in the Manager of tasks and close, just enough... but then double click TCrdMain.exe does nothing and will not reopen the blooming thing.

    How can I restart the utility? And, there have been updates to make it a more stable?

    AFAIK, you can disable and enable this Toshiba flash Cards under programs-> Toshiba-> Utilities-> settings for Flash cards
    Check it maybe it helps.

    But usually the flash cards service can be enabled and disabled in computer management. Under Services choose the Flash map service and start it again!

  • Suddenly, satellite L750 going to sleep - low battery?

    Hi guys,.

    I just want to ask why is that when I'm playing games like Assassins Creed/DMC.
    Sometimes my phone will shut down. The indicator lights on the left side were:

    A/c power: white Uni

    Power: Flashing Orange

    Battery: Flashing orange and

    And when I try to turn it on, it turns even if I press the power button.

    Furthermore, I always remove the battery.
    I could only turn on when I unplug the charger and plug it in again.
    Sometimes I can play for hours and it only happens when I play games.

    Model: SAtellite L750-1EZ

    Hello

    First clarify you something:
    The laptop goes to fashion 'sleep' or he just stopped automatically?

    Now something about the indicators:

    _DC/LED (first left) _
    This lights normally white when properly power adapter.
    If the output voltage of the AC adapter is abnormal or if power outages, this LED is flashing ornage/amber

    _AC power LED: (2nd left) _
    It normally turns white when the computer is turned on.
    If you turn off the computer in Standby Mode, the LED flashes orange about one second on, two off dry. Once when the system shuts down and while it remains off

    _Battery LED (3rd left): _
    This indicator shows the State of charge of battery and white indicates that the battery is fully charged. Orange indicates the battery is charging and orange blinking indicates a low battery charge level.

    Troubleshooting _Now: _
    If the computer turns off and DC IN indicator flashes orange/orange could be linked to the high temperature of the CPU: overheating.
    This can happen due to games because the laptop s CPU running performance
    and produce a high heat dissipation.
    This can happen because the cooling modules are timed by the dust.

    Here is an instruction how to clean the unit:
    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  • InDesign crashes suddenly then copy and paste from Illustrator...

    This is a really recent thing that never happened before, it's bugging the hell out of me, and google offers no solution so far...

    I am running Mac OS X Snow Leopard and InDesign + Illustrator CS2

    (It's software company Adobe CS4 or CS3 update is not an option)

    My problem is I'm trying to paste a code bar created in a program called "Easy Creator barcode" in an Illustrator document and vectoriser vectorize then the bar code, copy it and paste it into an InDesign document.

    Everything works fine until I have switch from windows from Illustrator to InDesign document - when I try to paste the code barcode described in the InDesign document, it breaks down just InDesign.

    The strange thing is, the two first bar code copied and pasted with zero problems. When I tried to paste the following, the crash has begun.

    I checked my preferences and checked the permissions of drive, but in vain.

    I don't know what is happening, but to do a quick sort as I have a date deadline for a catalog of this week!

    If anyone has any ideas, tips or solutions they would be greatly appreciated!

    See you soon

    If you have already converted to outlines, there are no police who could be replaced or fail to be integrated in the placed art, so a user error cannot cause a problem that would not also be possible with a pasted graphic.

    But if you stick to keep your job, keep your job. Try to make a copy of the file, then export to .inx and open and save as a new .indd. See if that fixes Watt is screing things up.

  • Crash suddenly and cursor flashing at startup...

    I have a R4 Aurora and was playing a game when it turns off suddenly and seem stuck in trying to restart. I disconnected and after a little plugged back in and tried to restart. The screen will display the Alienware logo and then switch to a blank screen with a cursor blinking in the upper left. The lights will turn on using the theme I chose.

    Any help will be very appreciated!

    Hey Naomi.

    I am very happy to say after rerun the test of HARD drive he came back OK.  Then followed all the instructions on the conduct of a pure install video drivers and install the video drivers Alienware. Computer nice race!

    I also discovered after using Sestem Detect I was behind on a few other drivers, chipset and others and will update this weekend.

    I really appreciate all the time and you provided a huge hug to help me! 

    Take care...

    WISPR

  • Lenovo Y50-70: Crash suddenly

    The machine is not even 2 weeks after the first start, and he already has a few problems... Laughing out loud

    3-4 accidents were from the days where there is no blue screen or overheating or suspended upward, just a pop hard and instant stop.

    It happens when the machine is on battery and during the laborious and do activities (high end-> browsing the internet games).

    Here I assume that all the drivers are up to date because he is recently bought and even then, I checked that some drivers are updated and updated lenovo confirms this.

    Please tell me if you need other information.

    Computer laptop specifications: -.

    Lenovo Y50-70 (59-440646)

    Processor - Intel Core i7-4720HQ CPU @ 2.60 GHz

    RAM - 16 GB PC3 - 12800 1600 MHz SDRAM DDR3L

    VRAM - 4 (GTX 860M) + 1Gbytes (Intel HD Graphics 4600)

    BIOS version - 9ECN37WW (V2.01) by Lenovo

    OS - Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)

    Hi Sky1409,

    According to dump files, there is a problem with the NT file system, please reinstall the operating system and control for the issue. Please take the backup of the data before you reinstall the operating system.

    I hope this helps. Do not post back if the problem persists.

    Best regards

    Ashwin. S

  • Hi my programs crashed suddenly adobe and I got an error message: 16

    The problem is that I can't uninstall and reinstall programs

    I tried the instructions of troubleshooting without help

    Please I need the programs to work as soon as possible

    Thank you

    Nirit

    Please see How to change the permissions of file on Windows 7 - 7 easy steps

Maybe you are looking for

  • Stuck in a subfolder and can not return to view all folders

    Used TB since many years and this is a first. This morning stuck to the sent folder. Can use to go for other folders, but it's a pain! Must show all folders and presentations to the left side but is not. I tried ESC, close and reopen it, rebooted com

  • Should what updates I leave install Windows7?

    I have a new laptop with Windows 7 and every time it updates it appears a blocker asking if I want to allow this download. But I don't know what downloads I'm supposed to say Yes and what could be something trying to push his way. Is there a list of

  • File in the Simulator connection

    Hi all I'm doing the connection files on Simulator and I already tested many articles on how to establish the connection file, but unfortunately no good result. 1.I created the file by clicking on res folder and add a file 'file '. 2.i add file by ri

  • How to work with an amazing stock "policies" which are actually paths (no usable fonts)?

    There are a number of beautiful actions "fonts" on Adobe Stock like those below:Sources: Adobe Stock #105636421, Adobe Stock #107949714But these "policies" (available as .ai files) are just a collection of letters, each representing a path in Adobe I

  • 43 creative cloud desktop application setup error

    10.10.5 MacCreative cloud had stopped working, showed the blank plate.  Followed the instructions to uninstall Creative Cloud App to allow new facilities.  But impossible to get a new installation as guard give the error code: 43No running program Ad