create 4 targets overlapping?

Similar Questions

• CREATE A TARGET TABLE

  Hi all
  
  Can we create a target in ODI table as as create us the definition of the target in Informatica. In the affirmative, please let me know as I am new to ODI.
  Also can you please give me a simple example on the variable works.
  
  Thank you
  VERIFIED BY VISA

  Hi VPV,.

  How are you?

  Yes, its possible to create table thro interface target running.

  In all the IKM (to flow tab), you will find CREATE_TARG_TABLE, if you decide that Yes it creates the table in the back-end.

  For variables, see Note: 471564.1 in metalink.

  Thank you
  G

• I'm trying to map a network drive. I created the target folder on the shared computer, but the folder does not appear when I try to map?

  I have a network machine, 4 machines and a fifth small office which acts as a server.  I created a folder target on the server.  Then, I try to map a drive on one of the four other machines that have access to this folder target on the server.  However, the target folder will not appear when I go to the other machine card.

  Hey Dano,

  Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• How to create LUNS target the same data store?

  In vnx5100, we created two partitions (MON) to be shared separately with 2 VM machines for clustering

  The question here is, that I have assigned the size of the LUN to a new data storage. And when I created ROW for a virtual machine, I had to choose the target LUN, but I wasn't able to see the unit number logic I'm looking for (the one that I have allocated for the storage of data, I created).

  The question here is:

  Why the logic unit number assigned to the storage is not displayed in the list?

  Do we need to create a LUN for the data store and a separate LUN target in Vsphere with the same size of the LUN in VNX?

  What is the target LUN in VMware (vsphere client)?

  Kind regards

  To a RDM and VMFS data store, you must create/submit two LUNS for ESXi hosts. What is stored on the VMFS data store is only the RDM mapping file (this will be created at the time wherever you add the raw LUN to a virtual machine), who shows up with the size of the RDM LUN, but requires no available disk space on the data (as a few bytes) store.

  André

• I created mega menu in adobe muse (master page) but the thing is when I saw the menu in other pages stuff I alreahy had created the will overlap the menu. Can I do to fix this problem. I wish I had the menu overlap the things I

  I created mega menu in adobe muse (master page), but the thing is when I spotted this menu in other contents pages I had already created will overlap the menu. Y at - it options that may correct this problem. I wish I had the menu overlap content. This did not happen on the master page (master page looks good) thank you very much.

  Place the menu on its own layer above the rest of the page content.

• Create table with overlapping parallel dates in individual columns

  I try to combine data from two different tables into a single table.

  The data in table 1 contains locations of patients in a hospital where each record represents a single location. Patients can be transferred several times between the different beds resulting from multiple records for a single visit.

  The data in table 2 contains the operative activity of the patient to the Hospital where each record represents either the GOLD of the suspension of the recovery room. A patient may have multiple operations in a single visit.

  I would like to join/merge/mashup data in a single table that contains the data parallel to each other. In other words, dates of the appliance on one side of the table and the activity of GOLD on the other. The difficulty is that the two sets of overlapping of dates of arrival and departure. I wish that the final table to divide the originals in new records when the overlaps do not coincide.

  Example:

  Original in both events (one per table)

  > Unit event has - from 14:00 to 18:00

  > OR event B - from 16:00 to 17:00

  Results in 3 documents (in the final)

  > Event 1 - unit from 14:00 to 16:00, null dates GOLD

  > Event 2 - unit from 16:00 to 17:00 OR 16:00 to 17:00

  > Event 3 - unit from 17:00 to 18:00, null dates GOLD

  Of course overlap can be more complex than the example above and adding code to indicate the 'ghosts' transfers to as well.

  In the code below, the first visit of the GOLD occurs during the first mention of the unit.

  Jason

  Oracle 10g

  [code]

  create the table delme_Unit_dates

  (id varchar2 (20))

  , unit_rcd_id varchar2 (20)

  , Unit_desc varchar2 (20)

  Unit_in_code char (1)

  Date of Unit_in_dttm

  Date of Unit_out_dttm

  Unit_out_code char(1));

  create the table delme_or_dates

  (id varchar2 (20))

  , OR_rcd_id varchar2 (20)

  , OR_desc varchar2 (20)

  OR_in_code char (1)

  Date of OR_in_dttm

  Date of OR_out_dttm

  OR_out_code char(1));

  create the table delme_all_dates

  (id varchar2 (20))

  , Unit_OR_id varchar2 (40)

  , Unit_rcd_id varchar2 (20)

  , Unit_desc varchar2 (20)

  Unit_in_code char (1)

  Date of Unit_in_dttm

  Date of Unit_out_dttm

  Unit_out_code char (1)

  , OR_rcd_id varchar2 (20)

  , OR_Desc varchar2 (20)

  OR_in_code char (1)

  Date of OR_in_dttm

  Date of OR_out_dttm

  OR_out_code char (1));

  insert into delme_unit_dates values ('123456', 'U1111', 'Unit A', 'A', to_date('2013-04-29 5:02:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-09 1:06:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'B');

  insert into delme_unit_dates values ('123456', 'U1112', 'Unit A', 'B', to_date('2013-05-09 1:06:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-09 4:53:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'B');

  insert into delme_unit_dates values ('123456', 'U1113', 'Unit A', 'B', to_date('2013-05-09 4:53:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-10 10:52:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 't');

  insert into delme_unit_dates values ('123456', 'U1114', ' unity, 't', to_date('2013-05-10 10:52:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-11 11:30:00 AM', 'yyyy-mm-dd hh:mi:ss am'), 'B' ");

  insert into delme_unit_dates values ('123456', 'U1115', ' unity, ' B', to_date('2013-05-11 11:30:00 AM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-12 4:00:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'B');

  insert into delme_unit_dates values ('123456', 'U1116', ' unity, ' B ', to_date('2013-05-12 4:00:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-16 2:14:00 PM', 'yyyy-mm-dd hh:mi:ss am'),' t ');

  insert into delme_unit_dates values ('123456', 'U1117', 'Unit Z', ', to_date('2013-05-16 2:14:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-17 2:26:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'B');

  insert into delme_unit_dates values ('123456 ', 'U1118', 'Unit Z', 'B', to_date('2013-05-17 2:26:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-20 11:30:00 AM', 'yyyy-mm-dd hh:mi:ss am'),');

  insert into delme_or_dates values ('123456', 'OR2221', 'or 1', 'O', to_date('2013-05-09 7:35:00 AM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-09 10:56:00 AM', 'yyyy-mm-dd hh:mi:ss am'), 'R');

  insert into delme_or_dates values ('123456', 'OR2222', ' 5', 'R', to_date('2013-05-09 10:56:00 AM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-09 3:20:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'U');

  insert into delme_or_dates values ('123456', 'OR3331', 'or 2', 'O', to_date('2013-05-16 7:59:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-16 10:43:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'R');

  insert into delme_or_dates values ('123456', 'OR3332', ' 8', 'R', to_date('2013-05-16 10:43:00 PM', 'yyyy-mm-dd hh:mi:ss am'), to_date('2013-05-17 11:20:00 PM', 'yyyy-mm-dd hh:mi:ss am'), 'U');

  commit;

  -Is far from what we

  Select

  U.*

  , o.*

  Of

  delme_Unit_dates U

  delme_OR_dates O

  where

  U.ID = o.id

  and U.UNIT_IN_DTTM < = O.OR_IN_DTTM

  and U.UNIT_OUT_DTTM > = O.OR_IN_DTTM

  order of U.UNIT_IN_DTTM, O.OR_IN_DTTM

  ;

  [/ code]

  Post edited by: Jason_S (changed a single date ' 2013 - 05 - 16 15:20 ' to ' 2013 - 05 - 09 15:20 ')

  Hi, Jason.

  Jason_S wrote:

  I edited one of the dates in the original post.

  Also although the inpatient unit and OR events are contiguous for a given patient (no overlap and without gaps - after that data are cleaned).

  ...

  The sample data you posted a of gaps in the data of the GOLD.  It is correct that the solution below works or not there are gaps in the two tables.

  WITH got_dttm AS

  (

  SELECT unit_in_dttm AS DTMC

  OF delme_unit_dates

  UNION

  SELECT unit_out_dttm AS DTMC

  OF delme_unit_dates

  UNION

  SELECT or_in_dttm AS DTMC

  OF delme_or_dates

  UNION

  SELECT or_out_dttm AS DTMC

  OF delme_or_dates

  )

  all_periods AS

  (

  SELECT DTMC AS in_dttm

  , (DTMC) ahead OF (ORDER BY DTMC) AS out_dttm

  OF got_dttm

  )

  SELECT NVL (u.id, o.id) as id

  u.unit_rcd_id

  u.unit_desc

  u.unit_in_code

  p.in_dttm

  p.out_dttm

  o.or_rcd_id

  o.or_desc

  Of all_periods p

  LEFT OUTER JOIN delme_unit_dates u WE u.unit_in_dttm<=>

  AND u.unit_out_dttm > = p.out_dttm

  LEFT OUTER JOIN delme_or_dates o WE o.or_in_dttm<=>

  AND o.or_out_dttm > = p.out_dttm

  WHERE p.out_dttm IS NOT NULL

  ORDER BY p.in_dttm

  ;

  You can use the query above to CREATE or a CREATE TABLE... AS command.

  If you have as much data as you say, a table or materialized view would be maybe faster to use.

  You will notice that I do understand not all columns; I would like to know if you have a problem, including them.

  I don't know what id role plays in this problem.  It is difficult to say when all rows have the same value.

• Create a target table by using the model of the ODI

  Hi all
  
  I am new to ODI. I'm try export table RDBMS for source RDBMS table at target.
  
  If we create the structure of the target in the trg schema table or we can create using the model fit obi by selecting new data store.
  
  Owb loading target tables is created and the data will be loaded.
  
  Pls help me about this.
  
  Thanks in advance.

  Hello
  You can create it in the two ways.if you create using ODI data store, you must select Create table option target in flow during loading of the target.

• Running script to create the target database user account: OIM 11 g

  Hello
  We have a database resource on which accounts are created by running a set of scripts. Creating a user on the database directly is not allowed. Is this a common use case? I am sure about how IOM knows that this account was created (how I would list the resources allocated to a user)? If I'm not listed as a resource for a user account, then how changes will be...
  
  Any suggestions or advice are appreciated.
  Thank you!

  Do the steps in the procurement process for example process shape, object resource, etc. from process.
  Call your script adapter java task map the response code returned by your script.

• Can I create multiple targets for a trigger?

  That I would finally have is a target by my trigger, so that another target to a different location on the page, the two appear when I rollover the trigger.

  Please let me know ways that I can achieve.

  Thank you guys!

  Don't know if you ever found a better way, but I just found a little of which I believe is what MickNYC was referring to a workaround.

  If you select news recommended under the widget of composition, the composition will change with targets. So you can essentially do a container of the entire page, where unchangeable information is placed above him. Then, all of the composition or the new container is affected by the target. I hope this helps.

• creation and targeting dynamic create MC (from AS2 to AS3)

  Hello!

  Before, I used something similar to this script (AS2) to create and target MC-buttons. But I got lost trying to rewrite this to AS3.

  Can someone take a look and hopefully help or give me a pointer?

  Thank you

  Original AS2 (works well):

  var fruit:Array = new Array ("apple", "orange", "lemon", "banana");
  var i:Number;
  var n:Number = fruit.length;
  for(i = 0; i<n; i++)
  {
      var tempname = _root.attachMovie("libraryname", "newname"+i, i);
      
      tempname.fruitName = fruit[i];
      tempname.onRollOver = over;
      tempname._x = 100*i;
  }
  
  function over()
  {
      trace(this.fruitName); // Being able to target  MC using "this" (In this case it's given fruit name )
  }
  

  
  

  My humble mezz AS3:

  var fruit:Array = new Array ("apple", "orange", "lemon", "banana");
  var i:uint;
  var n:Number = fruit.length;
  for(i = 0; i<n; i++)
  {
      var tempname = attachMovie("libraryname", "newname"+i, i); //Where did attachMovie go??
      tempname._x = 100*i;
      addChild(tempname);
      tempname.addListener(MouseEvent.MOUSE_OVER, over);
      
  }
  function over()
  {
      trace(this.name);
  }
  

  To study in detail what then after the previous poster suggested.

  Create a symbol in your library and name it's class MyButton linkage--> post the following code on the timeline--> traces to observe:

  var xml:XML = 
       
            
            
            
            
            
       
  ;
  
  var buttonInstance:MyButton;
  var buttonData:XMLList =  xml.buttons.button;
  var len:int = buttonData.length();
  var buttons:Array = [];
  
  for (var i:int = 0; i < len; i++)
  {
       trace(buttonData[i].@label);
       buttonInstance = new MyButton();
       buttonInstance.addEventListener(MouseEvent.CLICK, onButtonClick);
       buttonInstance.label = buttonData[i].@label;
       buttonInstance.index = i;
       buttons.push(buttonInstance);
       buttonInstance.x = 100 * i;
       addChild(buttonInstance);
  }
  
  function onButtonClick(e:MouseEvent):void {
       trace(e.currentTarget.label);
       trace(e.currentTarget.index);
       trace(buttons[e.currentTarget.index]);
  }
  

• creating the table target with ODI KM

  When I create a target using ODI table he put "around the domain name. How can I avoid this. I use the incremental update of the IKM Oracle. I tried to change create target table section, but it fails.
  
  Someone at - he found a work around that.

  ODI APIs used in the KMs service automatically add quotation marks around the name of column according to how you have them defined in the data model/store.
  If you have defined the lower case or mixed case, ODI will add citations.
  If they are uppercase, then ODI will not add quotes. So, make your fields in capital letters.

• Specify a target or the device by its IP address is disable

  When I want to create new target FPGA in my project. Only discover a target or existing device is available and specify a target or a device by its IP address is disable. How to activate it?

  Did it work before and now does not work? Or if you have never had this option?

   

  Looks like you may need to install the NI CompactRIO drivers - you may have the FPGA module and maybe drivers for talking to RIO cards in your PC (PCI, for example), but not the drivers of ethernet frame as cRIO etc. base.

   

  Can you show us the list of MAX under 'software', showing that you have installed the drivers?

   

  It could also be the installation order - if you have installed the drivers first it could not have installed LabVIEW tools... it may be also have a necessary service is not installed/not working properly (network discovery or server NI RIO etc.)

  You will need to click on the targets and devices as part of the project - not 'my computer '. Adding targets in my computer's internal/USB card, adding the project is for devices that are not connected to your computer (for example ethernet cRIOs) internally. I wrote this and then saw that he says "add targets and devices on my computer" in your screenshot.

• Get a ref to a newly-created channel script

  I'm a noob to scripting tiara and it's been well over a decade since I did any significant vb coding, so please forgive me for what is inept.

  I use the function ChnFiltCalc to operate my data by a low filter pass, and this function automatically creates a new channel containing the signal filtered at the end of the group.  In the data portal that I would move the new channel so that immediately follow the unfilitered channel, it is, however, ChnFiltCalc is not a reference to the new string.  In addition, the new channel may or may not use the name I assigned to it (Tiara will add a number if it's a duplicate name) and based on what I read in the help files, it may be the element with the largest index.

  Is there a standard way of robust way get a reference to the new channels created by the functions?

  Hi Rose Dalban,.

  My personal preference must first obtain a channel object variable when you create the target channel in the Group and the location of the channel (TargetChannelIndex) that you want to be (where the name of the desired channel will be unique), then go this channel object variable to the order of ANALYSIS in his channel of target setting.

  ' Set Group = Data.Root.ActiveChannelGroup
  
  ' Set Group = Data.Root.ChannelGroups (1)
  
  Set Group = Data.Root.ChannelGroups ("DesiredGroupName")
  
  Set RChannel = Group.Channels.Add ("result Channel", DataTypeFloat64, TargetChannelIndex)
  
  Call ChnFiltCalc (XChannel, YChannel, RChannel,...)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Restore the Image of the camera target in VBAI

  I use Vision Builder AI 2012 with Smart camera NI1772C.  I can create target camera Image (Menu > target > create a target Image) but is it possible to restore the image on the camera?  The image is similar to PC save the image that can be safely stored and restored in case of emergency?

  Once you have created the image of the target, you can update any target of similar model with this image. VBAI launch and the start screen, select the target to update and do a right-click on the target and select "configure." On the last step of the configuration, you can navigate to the zip file that contains the image that you did to restore the target with all the image files.

  Hope that helps,

  Brad

• Change the target application in FDMEE

  Hello

  I currently have HFM1 as my application target in FDMEE. Now, I need to change for HFM2. I registered in FDMEE HFM2. But not able to find where to change application target to HFM2 to start loading data to the new application. Any suggestions...

  Thanks in advance

  Hello

  FDMEE will provide the ability to select the application target while creating the import format... Assign this import format to the new location, you create and target Application will automatically fill...
  So, if you want the same 6 locations / import formats to point to HFM2, then you must create the objects to new (first import format) then location and other objects.

  Please let me know if it helps.

  Thank you

  HP