create a curved edge

Similar Questions

• You use the stylus to remove an anchor point or create a curve?

  When you place the pen tool on the anchor points on an open path, it shows a sign-, but when I click on the anchor does not remove the anchor, and if I click on the anchor a second time turns into triangle symbol to create a curve.

  1. Why does sometimes delete anchor point when the - sign appears and I click an anchor point, while other times it does not work?

  2. What is the shortcut to go directly to the side of the triangle without having to double click on an anchor?

  Thank you.

  Are you referring to the endpoints of a path?

  In this case it must be

  -use the subtraction-anchor-tool or

  -Select a point with the direct Selection tool, and then press the delete key

• I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  1. Draw a set of concentric half circles also spaced, stacked so that the outermost is the most remote.
  2. Use the text tool to add text to the outermost path, thus creating a PathType object.
  3. Select all the paths. Type > threaded text > create.
  4. Text tool: click at the end of the text in the object of PathType. Continue typing.

  

  > If I do that it will not type more.

  A Warp effect is a direct effect. When it is applied to the type of objects, they are still editable text. The chain will deform, however, the text also, not only the paths to which it is attached. Sometimes you want that, sometimes you don't have.

  JET

• How to create a curve in Fireworks

  Hello
  
  How to create a curve in Fireworks and pop a picture in the background like this http://www.celebrityproductions.info/
  
  I know how to achieve this effect in Illustrator, but how are you Fireworks?
  
  Thanks for your help

  Small tutorial from Captivate of Linda will help hopefully more than words of
  me :-)

  http://www.playingwithfire.com/curvaceous2.htm

  For your image in the shape that you created. Place your shape on the
  the top of the image, select the image and shape and change, select menu
  Mask > Group as mask.

  Peter
  __________________________
  "sheriff007" wrote in message
  News:ebc9cu$oq8$1@forums. Macromedia.com...
  | Hello
  |
  | How to create a curve in Fireworks and pop a background image
  as
  | This http://www.celebrityproductions.info/
  |
  | I know how to achieve this effect in Illustrator, but how do you go
  Fireworks?
  |
  | Thanks for your help
  |

• How to create links in a project of Muse to an anchor with a button created in Adobe Edge?

  Hi everyone, I created a button with edge animate, but when I import in my project Adobe Muse I can't link to anchors in Muse.

  What is the code?

  Thank you.

  Edge entertainment in an iFrame, which is technically a different page than you have placed the ILO tone on. To get the button to link to an anchor on the homepage, you will need to create a literal link (/ #anchor page.html) as an action on board. Make sure that the target attribute is set to _parent.

  who should do the trick but it won't be a smooth roll as Muse normally between anchor points.

  David

• Remove annoying curved edge option?

  Not like some new changes in Illustrator...

  Anyone know if you can turn off the annoying points inside an object?  To move or duplicate an object he curved the corners.

  I'll cross my fingers for that! Laughing out loud

  View - Hide corner Widget... Woohoo!

• How can I re create the curved line in the disabled icon? (image below)

  

  Here is a breakdown for you...

  Create the circle with the ellipse tool:

  

  (I put the 30pt race and selected the end of round cap option.)

  Turn the circle of 45 degrees:

  

  Using the direct selection tool, select the upper right:

  

  Delete:

  

  I hope this helps.

• How to create a lively edge on a video file

  I would like to use a 'video' background in Muse CC - as in this example: http://gosharubchinskiy.com/ 

  It is built in Flash. It is possible to create something like that on board animate? If so, how can I do it?

  you made a working model

  https://app.box.com/s/4m9eustxry6jw1nj2jyk

  Edit the video by replacing the video.mp4 file in the video folder

  -Rob

  If this helped you, make it the correct anwser

• How do Control M to create an adjustment layer curves?

  M control creates a default curves adjustment.  However, there is a way to get control M to create a curves adjustment layer.  I forgot how to do this!

  Go to Edition > shortcuts keyboard and change the Ctrl + M to layer > new adjustment layer > curves.

• How to create a uniform gradient w / Soft Edge & filter

  

  Hello, Im using photoshop 6 and Im trying to apply an effect to a photo of the banner, which will be compatible for more pictures of the banner of the same size.

  I have attached a picture of this.

  
  As you can see the gradient (which contains the text) starts with a gray and then white. The right edge that meets the blue sky is not a hard edge but rather a soft edge.

  
  I'm not sure how to create that soft edge. Someone else had mentioned to use the gradient with colors of gray to white then to transparent to create this right edge soft.  I'm not sure how to implement that.

  I used a brush in this case, and as you can see, the line is uneven.

  
  Also, I think that the filter used here is ripple or Ocean Ripple.

  I was hoping if someone could guide me through what would be the correct steps to create this effect, so that I can use systematically for several photos

  Oh, I see, 6 PS. The pieces here on the layers of filling and the Layer Styles does not apply, but mounting method is the same:

  ---------------------------------------------------

  First, open the gradient editor by clicking on the gradient in the toolbar of the dialog for a gradient fill layer or options:

  

  Set up a gradient of gray and white, then add a transparent stop just not the white judgment:

  

  Enter a name and click "New" to save him. You can also save as part of a layer with Gradient Overlay Style.

• Block the Gaussian curves membership in system build FuzzyLogic

  Hello

  As indicated in the User Guide for the block SystemBuildTM FuzzyLogic (ver. Apr. 2007), you can create a curve of triangular composition simply by using the special function:

  Trg(x,a,b,c)

  Is there by chance an another special feature to create a curve of Gauss membership (such a curve for membership is very common in Fuzzy control applications)? Otherwise, any ideas on how I could define it myself, because I really need to use a Gauss membership instead of a triangular curve.

  Thank you very much.

  OK, for those of you who would be interested in using a Gaussian membership function, I just find a way to set it in the block of fuzzy logic by using the exp function, as follows:

  exp (-0.5 *(X-c) ^ 2/b ^ 2)

  where

  c is the center of the function Gaussian and b ^ 2 is the variance.

• Edge of metering using nicaiu.dll

  I am trying to create a counter edge by directly calling functions in VB.NET nicaiu.dll. I am able to read the counter OK value but counties still return to the initial value set when I created the channel. For example, I create the task of counter by using DAQmxCreateCICountEdgesChan and the value of the initial counter 100000. I then read the meter using DAQmxReadCounterScalarU32. The County changes when I turn the encoder cable channel meter but returns to 100000 once the encoder stops.

  The wiring is correct, because it works correctly using the Test i/o counter OR-max Panel. The number increases as I turn the encoder and never resets when the encoder stops.

  Finally, I need to get this working using DAQmxCreateCILinEncoderChan but I see the same behavior when using this type of channel. For now, I use DAQmxCreateCICountEdgesChan because it is easier and mimics the function in the Test NOR-MAX Panel.

  I did this job using the .NET DAQmx API. However, there are errors when my application runs on a computer with a different version of NOR-DAQmx of what was used when the application is compiled. The appeal of the DLL directly seems to eliminate problems with different versions of DAQmx.

  No idea what I'm missing?

  Public Class Form1

  Private Declare Function DAQmxCreateTask Lib "nicaiu.dll" (ByVal TaskName As String, ByRef NITaskHandle As IntPtr) As Integer
  Private Declare Function DAQmxCreateCICountEdgesChan Lib "nicaiu.dll" (ByVal TaskHandle As Integer, ByVal PhysicalChannel As String, ByVal NameToAssignToChannel As String, ByVal edge As Integer, ByVal InitialCount As UInteger, ByVal CountDirection As Integer) As Integer
  Private Declare Function DAQmxReadCounterScalarU32 Lib "nicaiu.dll" (ByVal TaskHandle As Integer, ByVal Timeout As Double, ByRef ReadVal As UInteger, ByVal Reserved As IntPtr) As Integer

  Private Const DAQmx_Val_Rising = 10280
  Private Const DAQmx_Val_Falling = 10171

  Private Const DAQmx_Val_CountUp = 10128
  Private Const DAQmx_Val_CountDown = 10124
  Private Const DAQmx_Val_ExtControlled = 10326

  Private TaskHandle As IntPtr

  Private Const STARTCOUNT = 100000
  Private Const DEVICECHAN = ' DEV1/CTR0.

  Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load

  Dim ErrVal As Integer

  ErrVal = DAQmxCreateTask ("ENCODER", TaskHandle)
  Debug.WriteLineIf (ErrVal <> 0, "Error" & ErrVal.ToString)

  ErrVal = DAQmxCreateCICountEdgesChan (TaskHandle, DEVICECHAN, "ENCODER", DAQmx_Val_Rising, STARTCOUNT, DAQmx_Val_CountUp)
  Debug.WriteLineIf (ErrVal <> 0, "Error" & ErrVal.ToString)

  End Sub

  Private Sub Timer1_Tick(sender As Object, e As EventArgs) Handles Timer1.Tick

  Dim ErrVal As Integer
  InVal As UInteger Dim

  ErrVal = DAQmxReadCounterScalarU32 (TaskHandle, 0, InVal, Nothing)
  Debug.WriteLineIf (ErrVal <> 0, "Error" & ErrVal.ToString)

  Label1.text = InVal.ToString

  End Sub

  End Class

  Try to explicitly run your task (DAQmxStartTask) after you have created the channel meter.  If you do not explicitly start your task, the appeal of reading starts the job instead, which would reset the count value.

  As far as I know if only this should once (on the first read call), then maybe it something else.

  Out of curiosity, have you considered using the API of VB.NET DAQmx instead of the dll unmanaged c?

  Best regards

• Create report for vm with c: weak readers

  Hi people,

  I'm trying to understand this. does anyone know of a doc on how to proceed. Thank you.

  The best way I know is to do a just request for user interface for readers of C and then create a table that.  If you go to-> queries (my definition) definitions-> create a new like this:

  

  Create a custom edge/report table, then add it to a table with the query.

  

  Then, when you add the options you want (make sure THAT SELECT EVERYTHING above right) and choose the following.

  

  If you want to filter you can add that as well:

  

  Finally!

  

• You have an example of flip 3D using Adobe Edge effect.  I was able to do with Flash but do not border

  Hello

  Could you give me an example of something staggering like on this page...

  Stunning 3D map | CSS, CSS transforms and animations CSS transitions
  
  

  but created in Adobe Edge.

  Any ideas? There are a few examples online, but they didn't work.

  Would appreciate any help.

  Thank you very much

  James

  Try this,

  Start by adding https://cdnjs.cloudflare.com/ajax/libs/gsap/1.18.3/TweenMax.min.js to your scripts Panel, then create a symbol called map, put two items in the timeline inside the called card Front & Back, and then use the following code:

  before var = sym.getSymbol("Card").$("Front");

  var back = sym.getSymbol("Card").$("Back");

  TweenMax.set (back, {opacity: 0});

  TweenMax.set (back, {rotationY: 90});

  TweenLite.set (before, {transformPerspective:800});})

  TweenLite.to (front, 1, {rotationY: 90, ease:Power2.easeIn, onComplete: flip});

  function flip() {}

  TweenLite.set (back, {transformPerspective:-800});

  TweenLite.to (rear, 0, {opacity: 1, delay: 0});

  TweenLite.to (rear, 2, {rotationY: 0, ease:Power2.easeOut});})

  }

• Implement edge animate button in Muse

  Hello

  Just a little question here, probably a really simple answer, but he could not find after searching around a few hours. What I'm trying to make is used to animate a button that is animated that I created on the edge to trigger another animation within the Muse (also to animate, IE a landslide of the Panel.) Now while this could probably be collected on board one and put together in Muse as a whole, I wanted the flexibility for other pages where I want to be able to change content frequently and trigger further action later as music links or even videos in a dynamic way.

  I know that I can add the action of 'click' > 'Link' action on board, but I don't think that will trigger an animation nor allow for demo test in muse to post a link to other pages meaning bugs, it will take living accommodation to test easily.

  Any advice is welcome!

  I've never used muse and I'm not familiar with it, but I guess using the AdobeEdge.boostrapCallback API is the path that you will want to take...

  Priming of the lively Compositions 'Adobe Edge leading Team Blog