How to create a uniform gradient w / Soft Edge & filter

Similar Questions

• How to create a pattern gradient in Illustrator

  I don't know the best way to describe what it is, so I'm the appellant a "gradient pattern. Basically, I'm trying to figure out how to make a gradient like the one in the photo, where the forms are located in the upper part and disperse evenly down. Any advice on this is appreciated, thanks!

  It does not really resemble a traditional mask opacity job for me because there is no actual all bland, its more to do with the gradual change of size and spacing of the forms in the model. an opacity mask would be a great way to face fading from 100% to 0% in the tone of a model, but it could probably be done with future adjustments easier to 'fill' just a model with a shade of color gradient?

  There was some discussion recently that resembled halftone patterns and a guy showed how to use different (other than the default points) forms under the mixed model that would achieve the result of half of this design superior. you will have to look a few threads of halftone pattern to identify it.

  as a simple manual option you could just draw the shape on top, then scale and adjust one down and use a form to make a "column of the model, then repeat it across the page.

  the lower part dotty looks more like a traditional model of halftone, Phantasm plugin allows great control of things like that, or you can just play with a radial gradient black and white as a fill of a circle and use the model of half-tone effect to create the points.

• How to create a conical gradient?

  I have a pyramidal shape, but I want a conical gradient to start at the top of the pyramid. How do I create one?

  tailchakra,

  If I (put) understand it, you can use a linear gradient 90 degrees or - 90 degrees, or you can use a raidal gradient and ClickDrag with the gradient tool from the top anchor at one of the Anchor Points low corner.

  For what is normally called a concial gradient or gradient/scan radar, you can watch these discussions with different aspects and links:

  Re: Custom gradients that follow an object from the beginning to the end?

  https://forums.Adobe.com/message/6749257#6749257

• How could request a uniform gradient to each letter in a Word, the whole word vs?

  I can't find out how to apply a gradient to text so that it is consistently applied to each letter vs the Word as a whole.

  I am trying to achieve.

  

  You are welcome.

  All this can be done in ID... but, it is inefficient and cumbersome. Or maybe it's ineffective because it is heavy. Your choice.

  This was done within the ID:

  

  In its simplest form, you can create a shade of gradient in the ID and apply it to live text as shown, highlighting each character individually, or vectorize the text and apply the gradient to each character nuance. But you can not add rectangles degraded the living characters (I don't think anyway). What you can do with the outline, as above, is to apply the gradient to each character, with a chart placed which is just the rectangles of gradients, is to have the rectangles sitting on cardboard region, hit copy, then paste inside the character indicated.

  But like I said, it's slow and cumbersome to do directly in the code.

• How to create a circular gradient progress bar

  In Illustrator, I'm truying to create a round progress bar. You may know that the loading windiws7 slider, or the circle loading in FireFox. (It looks like a circle with no fill, only a line of fat - a bit like a doughnut. I want border line to be a gradual gradient at the end - see attached picture below, it is the upper right). Things I only get done sofar me a half a circle/gradient, just like the image below. What I want is a gradient that will completely round. What I did is the following: create a small circle, no fill, just a big edge. Expand it and give it a gradient.

  I imagined an another way to get what I want, only problem is that I don't know if this can be done in Illustrator: can you create a rectangle with a gradient, and 'bend' or leave it to 'follow' along a path of circle? Just like text can give a path?

  Or am I think far and is there another way to accomplisch this? Sure hope so.

  Oh by the way, I only intend to use this photo in a photo Station slider. So there is no need to load percentages, as your regular rectangle can do bar.

  Thank you!

  

  Illustrator does not provide what is sometimes referred to as a "radar" or "conical" sweep degraded. Its gradients are limited to the most basic linear and radial. Recent versions of Illustrator also provide an objects gradient mesh, but it's pretty heavy for such a commonplace treatment.

  This question has been answered and described several times in this forum. Illustrator solutions are to use mixtures (and, if you have the brushes from these mixtures.) Search the Forum and you will find them.

  JET

• How to create of new gradients/gradient use

  Hi all

  I'm having a lot of trouble with gradients. I can't create new gradients and usually if I managed to get a box colored when I move to a second object with a gradient, I can't import a new color in the gradient swatch. When I pull the top of the new window shade gradient, all the colored boxes are grayed out: it is not quite the choice (see below) so I can't create any new color except what exists already IE white in black at the bottom of the window. Help, please!

  

  See the gradient ramp

  Click on one of the proxies of swatch - white or black at the end. Does anything happen?

• How to create a transparent gradient?

  I use Photoshop Elements 8.  This could have a very simple answer, but I can't understand it.  I'm trying to take a layer and simply get a solid image to a transparent gradient, while it disappears gradually.  It's hard to explain, but I hope you understand.  Please let me know if you know how to do this.  Thanks to a bouquet.

  -TitanVex

  It would look somewhat like this:

  IIIIIIIIII IIII II I I I I

  IIIIIIIIII IIII II I I I I

  IIIIIIIIII IIII II I I I I

  ^                                      ^

  Solid picture

  Part of gradually

  Picture disappears

  If that makes sense.

  Is that what you are looking for?  I used the method of Group of clipping that mentioned Terri.

  1 added an empty layer below the photo layer and grouped the 2 layers.

  2 set the gradient options: linear, to the first plan of Transparent

  3. calls on the gradient of approximately 1/4 from the edge left completely to the right edge.

  You can continue to draw the gradient with different staart and endpoints until you get the desired result. Just a matter of trial and error.

  I added the white layer so that you can see the results.

  

• How to set the pixels for the softer - edge, in a design? I use PhspCS5 TRIAL grateful for help!

  First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better

  visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have

  greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines

  pixels, which appear on the 'place '.  I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)

  and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged).  So going

  back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"

  I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the

  same color II had chosen.  Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go

  on the 'design' say after a break for tea, etc.  ?????  (    :

  I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about.  I save pdf (1) and a jpeg.  Hope that this sounds

  like what we "do"... When we know much more than me.

  And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs.  Are there

  another of Adobe products, I would have to do this.  Free hand has not worked so well, so far.

  I'm in advance, so grateful to you - anyone you may, for your help.  I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71

  and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW

  Please post in the Photoshop forum.

  http://forums.Adobe.com/community/Photoshop

  Bob

• How to create a gradient of irregular

  I know how to create square, circular and radial gradients, but sometimes I need the gradient to a more asymmetric or irregular shape of, say, a cloud, a star, a dog or a bottle. What are some good ways to do this?

  Thank you.

  Place a filled area of your gradient desired on a transparent layer in the opposite case and add a stroke layer style. The Type of gradient fill value and Style to the bursting of the form. Adjust the size to give the desired effect.

  Note that the effect depends on the width of the image; the narrow parts only get one end of the gradient, and the environment might not get anything at all, so you can reduce the opacity of the layer (NOT the layer opacity) filling, or add a color overlay or a decorative motif for the layer Style.

  

• How can I create a background gradient which does not affect the readability of the words in the foreground?

  

  Note that the words seem to disappear as the blue becomes more important?

  How can I fix it?

  In addition, since I work more than 30 plans, is there a general framework that needs to be changed?

  Furthermore, this gradient was created using the gradient tool, and is therefore not part of the background.

  Under file-> Document Setup, I found that you can create a background Uni but see no options for a gradient fill.

  I would appreciate help.

  I'm like your gradient is above the text.

  Select your gradient and the hit Shift + Ctrl + [ ]

  This should send your gradient to the back behind the text

• How to create the gradient transparency

  Hello
  Please share how to create gradient transparency
  joined the example

  qanibh,

  In the new version (s), you can specify the values of opacity for the gradient fill.

  In older versions, you can:

  (1) create the shape with the color of fine solid on the background one.

  (2) copy forward, apply a gradient to the copy, and in the transparency palette/Panel flyout to make mask opacity, adjustment Clip and invert as desired.

• How to create the ellipse path gradient to PDF using object code

  Hello

  Someone tell me how to create PathGradient ellipse in pdf.i found the way to shadow Rectangle in pathgradient, but the ellipse can't shadow as pathgradient, if you know tell me please,

  Kind regards

  Sasi kumar S.

  Please refer to How to create LInearGradient in pdf format for why this isn't the right forum. Thank you.

• How to create a gradient of the race in this way

  Hi all

  I'm looking to create a contour gradient as it is a color gradient that runsaround the race rather than through it?

  Thank you

  Hi real goat.

  If you are on AICS6 or above, you can try Gradient features Panel gradient color option.

  

  You can see more about it on this tutorial.

  http://www.adobepress.com/articles/article.asp?p=1855821

  Kind regards

  Dhirendra

• Create a white gradient on a photo

  I need to create a text box gradient white on a photo in the background. Please take a look at this example:

  http://www.pixentral.com/show.php?picture=13EWsrgyHCHak3Aqfn6SvNPkyvbNd

  It was created with the gradient tool, but I don't like the hard load on the edges of the white. I want to create a white gradient going from top to bottom, but with an opacity drop-off (with soft edge) so up and down are 0% as shown.

  The problem is, I can't understand how to apply different opacities to different parts of the gradient. I have 100 percent and grade outside Center zero up and down. Any way to do it? Or is there another tool, I should use?

  Thank you

  Eugene

  It's one dodle.

  Let me introduce you to the wonderful world of opacity masks.

  Click on the layer (the white box in this case) you want to fade on the edges, make sure that the transparent window is open (otherwise: window > transparency) and on the left, click on the small arrow in the upper right corner, then click on "make opacity mask".

  Now left click once in the little black box that just appeared in the window of transparency.

  Now draw a box placed exactly above the white box (you can on the edges aside without any problem in this instance, but it is best of best practices).

  Now with this new box selected create a gradient that goes from 100% black to white (in the middle) to 100% black again. You must make sure that it is a pure black, I do not work in CMYK mode normally, but I know that if I work in RGB, I make sure I use RGB values black and white and not in CMYK (which could be "fixed" in CS4).

  Make sure that the degraded rotation will sense and your pretty much done.

  You can change the color saturation levels to adjust the level of transparency.

  Once your done left click button in the window of transparency.

  Now your done, the opacity mask will remain attatched to your artwork until you de-tatch it.

  Hope that helps and is in fact your request.

  Concerning

  Paul

• How to create a horizontal line in the region of html

  Hello

  How can I create the html elements, including a horizontal line in an html area filled with items. I want to use this horizontal line to part elements optically. Moreover, my solution for now is to group the elements belonging together in a separate html area. So I have now 3 parts of html, each filled with 5 columns of elements. Is it possible to align the elements in the 3 regions (together)? Cause at the present time, only the items in each region are aligned.

  I use oracle 11 g 2 with apex 4.1

  wucis wrote:

  Apex version is 4.1

  Theme: Sapphire 17

  Page: Two level Tabs - right Sidebar (optional / based on a table)

  The region is HTML

  Main question is, how to create a horizontal line as visible separator between items.

  My personal preference would be to group the items according to the needs in the subregions and use CSS to display the Visual borders and uniform spacing of control over formatting tables.

  If however you want using HTML single region, is to create elements of the only view to the agenda of the positions of the sequence in the region where you want the jumps to appear, with the following parameters:

  Name: PX_HR_1 / / substitute suffix number and an increment of page as required

  Display in the form: Display only

  Save Session State: NO.

  Start on a new line: Yes

  Start the new field: Yes

  ColSpan: number of columns in your layout

  Label: leave blank

  Horizontal/Vertical alignment: Above

  Model: --choose a model--

  Type of source: Static assignment

  Source of value or expression: