Create a custom with detail header and Associates then detail report

Similar Questions

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• How to create a line with pointed head

  Hello
  In my application, I need to draw the line with pointed head, I don't know how to set a custom with pointed head line.
  
  Is there a solution, please answer.
  
  Thank you

  Hi, add this function after drawing the line

  public function createArrow (): void
  {
  var angle: Number = Math.atan2 (getY2 () - getY1 (), getX2 () - getX1 (());
  graphics.lineTo (getX2 () - arrowHeight * Math.cos (angle) - arrowWidth * Math.sin (angle),)
  getY2 () - arrowHeight * arrowWidth + Math.sin (angle) * Math.cos (angle));
  graphics.lineTo (getX2 (), getY2());
  graphics.lineTo (getX2 () - arrowHeight * arrowWidth + Math.cos (angle) * Math.sin (angle),)
  getY2 () - arrowHeight * Math.sin (angle) - arrowWidth * Math.cos (angle));
  }

  getX1(), getY1(), getx2() and getY2() are the start and finish of the line

  Hope it will work for you.

• Create a custom theme, template, css and images.

  Hi all
  
  I create a new theme with new models. I would like to use images for buttons in my new models via CSS.
  
  ApEx is delivered with predefined topics and each topic contains objects of support for this theme.
  For example: on our server under $ORACLE_HOME/apex/images has a directory for each theme (theme_1 to theme_20)
  
  Can I create a new directory for our custom theme under $ORACLE_HOME/apex/images and use it through the ApEX? If yes how can I do using this EPG or HTTP Server?
  
  I have the EPG and HTTP server configured for ApEx.
  
  Thank you.
  Ally.

  Hello

  Yes, you can create new folder and have your theme images and CSS here.
  OHS need have access to the folder on the server where you have placed images.

  If you are on the EPG, the Dietmar Aust blog post might help how you can access virtual folder is using FTP or WebDav and create new images folder and place here.
  http://daust.blogspot.com/2006/03/where-are-images-of-application.html

  Kind regards
  Jari

  Published by: jarola 28 Sep, 2010 19:53

  This blog post from Sara Blair also helps with EPG
  http://www.apex-blog.com/Oracle-Apex/accessing-i-using-FTP-170.html

• How to create link custom in overall header?

  Hi gurus,
  
  
  I had an obligation to create a link custom header overall next to the link to the administration, so when we click on this link, it must navigate my client Web page.
  
  Please help me to achieve this goal.
  
  
  Thank you.
  
  Published by: 934322 on May 8, 2013 12:15 AM
  
  Published by: 934322 on May 8, 2013 01:22

  Check these
  http://docs.Oracle.com/CD/E25178_01/bi.1111/e10541/answersconfigset.htm#BABHAEIF
  http://obieetipsandconcepts.blogspot.com/2012/04/customized-links-on-header-OBIEE-11116.html

  check if help

  Published by: Srini VIEREN on May 8, 2013 05:59

• How to create the table with the rows and columns using the layout?

  One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
  but I couldnot make an ordinary table with the rows and columns in mode available th
  y at - there someone who can tell me how to?
  Thank you very much

  Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
  wrote:

  > A friend of mine advised me to put my whole site on the mode of disposal as its
  > better than standard, as he says

  Your friend won't. Don't listen to him any more. Mode of disposal creates
  very fragile and rigid code pauses at the first opportunity.

  Gary

• How can I create a button with alpha background and text? When the alpha element group influence all elements, but the text remains 100%

  When the alpha element group influence all elements, but the text remains 100%
  I try with the Group of elements and no group, but include elements in the 'State' of the widget library button. Nothing!

  Explain dough my problem and please excuse my English...
  I need to have a transparent background with text (name and job) at the start. When I rollon with the cursor of the mouse on the button background should take a color with 60% alpha, required text full color stay, but if I group or insert State of the item on Rollo button mouse everything take alpha 60%

  I need to regroup or insert in elements went State button because if they are ungruoped to mouse Rollo on bottom its all is ok, but when the mouse passes over the background of text out you of you initial state.

  Can someone help me please?

  I think I know your problem - are you using the opacity of the 'effects' rather than opacity to "fill" - one of the effects will affect the entire element rather than just the rectangle.

  Use this opacity

  

  not this one

  

• Can print files to Acrobat 9 Pro with vector header and footer?

  OK-obviosly I don't know what I'm asking!

  Let me explain-

  I want to be able to take a Word file or xls and when I print to Acrobat I have my logo as a vector image.  I don't want any documents to my clients who have raster images.  I know-weird and anal.

  Now I put a png in word or xls file and save as PDF.  Or I use InDesign CS4 and manually copy / paste the content in the file.

  Any suggestions?

  
  Thank you!

  The problem is that your original image is a PNG file. It is a bitmap image. You should start with a vector and use it in your WORD file. The end result should be vector in this case. Print in PDF format will not change a bitmap to a vector graphic. EMF, EPS and other general forms can contain graphics bitmap or vector, but like I said your departure point was a bitmap PNG file and so you're stuck with bitmap unless you back up and redo your logo.

• How to create a signature to emails customized with the fonts and colors that I select instead of the default values?

  create a snazzy to my e-mail signature

  Hi, I want to create a signature in my windows mail email... He will be only with the police, which is the standard... How do I create a jazzy, as have the font and the color I want? Thank you

  Note: The HTML Signatures must be less than 4 KB.

  Open a new Message window and create your signature. (Insert the graphic & text). Click on the Source tab (view |) Source Edit if not already checked). Highlight the complete source code and copy / paste into Notepad. File | Save under and in the file name field, save as htm, (i.e. Sig1.htm). It will be saved in My Documents by default. Go to tools | Options | Signatures. Click: File | Browse and insert your saved signature | Apply. You can now rename it if you wish.

  Of course, if the recipient reads in plain text, they don't see the it.

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• Need to create a background for hompage header and information site - HELP

  Hello

  I'm working on a website for a friend and I'm using Wordpress (for the first time) because they must be able to maintain it without knowing html or css.  So, I use a template from elegant themes.  So far, the site looks like this: http://dev.modernrestaurant.com

  My friend wants a header similar to this: http://www.carminesnyc.com/

  I would like to know how to create these types of images.  I know my way around PS and FW, but I'm new to tile, etc., what is needed to make a quick loading web pages.  Any help would be great.  After I created what I need AC, I ask then how to put it on the site (unless someone is a php wiz and wants to help me here )

  Thank you!

  It is made with various background images:

  This semi transparent PNG is on top of the clear white logo image

  http://www.carminesnyc.com/assets/images/logo-BG.PNG

  http://www.carminesnyc.com/assets/images/logo.PNG

  This background of page is repeated-y (vertical)

  http://www.carminesnyc.com/assets/images/bg.jpg

  Nancy O.

• How to create a labelfield with fixed width and dynamic height?

  I got this question in fact for a long time and I have not found answer in this forum so far.

  As we know, we can use:

  public int getPreferredWidth()
  {
      return fixedSize;
  }
  
  protected void layout(int width,int height)
  {
      super.layout(getPreferredWidth(), getPreferredHeight());
      super.setExtent(getPreferredWidth(), getPreferredHeight());
  }
  

  to set the width fixed in a field, but if the text is too long and should be multiline, this will bring problem, getPreferredHeight() only returns the preferred height, which is actually not the actual height, so the text will be hashed.

  So what should this setting? height?

  super.setExtent(getPreferredWidth(), height));
  

  No.... the height value is too large.

  So, how can we set this parameter to make this labelfield looks perfectly.

  Any idea?

  A search on the web is expected to increase a lot of examples of functions in Java text wrapping. Especially for BlackBerry, you can use Font.getAdvance (String text, int start, int len) to measure the width of a text segment without the expense of creation of substrings.

  The basic logic is to analyze the text character by character. If the "\n" character, force a line break. If the character is a space, then it is a line break candidate; Check if the line so far is set. If so, then move the candidate to that character end and continue; If this is not the case, go back to the previous candidate break and put an end to the line right there. The loop is initialized so that there is always at least one character on the line. The process ends when you run out of text. Details (including dealing with empty text, several spaces, etc.) are kept as an exercise for the reader, or search the Web well.

  I wouldn't worry efficiency. Put on the page of the field is not all that often, and when it's done, there's no escape from the need to make the work of packaging line at some point before the text is rendered on the screen. One way to avoid unnecessarily repeating work is to memoize the function of packaging line: wrapped lines and the width of the film cache and reuse them as needed. The cache is marked invalid if changes to text or the current width and the width of the film cached differ.

• srvrmgr syntax: How can I create subsystem named with the name and Description of the values?

  Looking through the library, he did discuss are of syntax that allows you to include the value of name and the named value of the Description of a subsystem/Profile Configuration.  In the screenshot, the circled values were created with the server online order Manager.

  

  On the other hand, pouvez create a definition of the element with a name (full name) and a Description.

  For CompDef, it works:
  create the CompDefTest1_enu component definition for the type of component AppObjMgr component fins group run mode interactive full name 'Test Comp Def Test 1' description 'Test 1 CompDef Manager object.

  For named Subsytem, it does NOT work:
  create named subsystem Test5 subsystem EAITransportDataHandlingSubsys full name 'Test 5' description 'Test 5 Description'

  Someone can tell me if there is a good for a named subsystem, syntax to include the name and Description of the values in the command line, or is the only way to create it manually in the UI?

  Hello

  I spent reviewing aid to create the order in srvrmgr, it does not give the full name and description as parameters for the creation of subsystem. However, as you noted these settings are available for creating components definition:

  srvrmgr > help to create

  Create {component group | compgrp}

  [full name: ]

  [{description | desc} ]

  create {definition component: compdef}

  for {component type | comptype}

  {Component group | compgrp}

  run in mode {batch | interactive | background}

  [full name: ]

  [{description | desc} ]

  [with [ param =[, =...]]]

  [[fixparam =[,...]]]

  create the subsystem named for

  subsystem with = [,...]

  Shelf also has an example of creation of subsystem that doesn't include no description, name and first name:

  http://docs.Oracle.com/CD/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472

  In this case I suggest that allows you to create a ticket on My Oracle Support to confirm this srvrmgr does not support the creation of a new subsystem with the full name and description settings and request an enhancement for these settings include request in create statement for new subsystems when using srvrmgr.

  It will be useful,

  WSiebel

• Creating an index with a script and style

  Hi all

  Using ID CS 4 on Win Vista

  I want to create an index for my book on vegetable oils. Each plant can have many synonyms and common names. The words I want to index will be marked in the screenshot below and follow the Red numbered headings:

  • Plant species
  • Synonyms of plant species
  • Other common names

  The words are separated by commas, and the only things that I don't want under these headings are the abbreviations in brackets

  Here are the codes of language (SP) to Spanish (FR) French etc. I could probably go back and using find/replace and strip this particular style of these entries to exclude from the process if necessary.

  I assigned a style called "Style indexing" at these words I want to be included.

  Is there a script or could a being invented that will MARK these words as index entries?

  I know that Jongware could probably spit in his sleep. Or of the Peters

  I know exactly zilch on the scripts.

  

  Thanks again wonderful guys

  Peter has a few clever tricks here.

  http://www.kahrel.plus.com/InDesign/lists_indexes.html

  P.

• Create a document with the height and the width defined by the user

  Hi all

  This is my code

  myW var = "131pt";
  myH var = '41pt;
  var myPreset = app.documentPresets.add ();
  myPreset.pageWidth = myW;
  myPreset.pageHeight = myH;
  myDoc var = app.documents.add (true, myPreset, undefined);
  myPreset.remove ();

  It displays the error "Data is out of reach"

  What should do?

  Thanks in advance

  Reduce the margins before adjusting the height so small value - 41pt

  var myW = "131pt";
  var myH = "41pt";
  var myPreset =  app.documentPresets.add();
  myPreset.bottom =  myPreset.top =  myPreset.left =  myPreset.right =0;
  myPreset.pageWidth = myW;
  myPreset.pageHeight = myH;
  var myDoc =  app.documents.add(true,myPreset,undefined);
  myPreset.remove();
  

  Kasyan