Create a second data store or expand an existing for a second guest data store

Similar Questions

• Cannot create a second data store?

  I created a 10 GB data from a disk HARD of GB 2700 store... its been working fine for over a week.

  I now want to create a second store data, but when I click on "Add storage" and then go into "Disk/LUN", ESXi gives me 0 options (as if this HARD drive doesn't even exist).

  Well Yes.

  a virtual disk (VMDK) is nothing else than a file on the data store.  So if you want, you can certainly create:

  A virtual machine of size 10 GB of pfSense

  A VM NAS with 10 GB OS VMDK, 2 TB of data VMDK and 600 GB VMDK 'Other'.

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• I need to create a second library for locations other than itunes music files?

  Mac book air with library itnes. Should high resolution I create a second library of music to not get data via itunes without loss to music downloads?

  I don't understand this. Downloads of the place where? Apple provides no music in Apple Lossless format. You can store all the files in a compatible format in the library, it's just that you can end up with multiple copies, each one representing the different format, unless you remove other versions or you do something fancy with smart playlists.

• How to create a second memory on a physical RAID?

  Hello

  I have a server ML570.  The server has 2 scsi cards.  I installed ESX35 VI in the first card (RAID 0).  On the second card, I configured RAID 5 on it and I have 1.6 TB of space.  I wanted to create/2 place for VM on RAID 5, is - it possible?  I created the first 10000 GB storage and there is no way I can create a second warehouse.  When I tried the wizard to create the second storage she did not see the 600 GB left.  I can add the 600 GB as a measure for the storage of first, but this isn't what I wanted.

  On a test server (DL380), I created the first store I was able to create the second storage when the console that I created the second vmfs partition with fdisk and then the wizard could see the second partition to create a second storage.  Why can't do this on the ML570?

  Kind regards

  We need to create 2 'virtual disks' storage side.

  If you take a single disc and you divide it into two partitions, then you will see GUI than the first.

  To with VMFS format the second partition, you have to work from the command line, with fdisk (to create the partition) and vmkfstools to make the VMFS data store.

  André

• Can I create a second e-mail address in an installation of office of Thunderbird?

  I use Thunderbird in a PC desktop system three-year-old DIY 64 bit Windows 7. I am the only user of this system and I created only one cable Comcast E-mail address for myself. I don't need a second address to date.

  I'm trying to use secure online accounts to manage healthcare for my elderly mother. I found that some sites use e-mail as the unique identification of registered users addresses.

  I wanted to avoid any confusion when I create two accounts with these sites, one for my mom and one for me. I thought that I could create a second e-mail address in Thunderbird for my mother, to use when we have all two accounts on the same site. Is it possible in Thunderbird or should I study if my ISP (Comcast) would allow me to create a second address that I can use as a 'User ID' my mother in sites that use for this e-mail addresses?

  Would I be able to receive his mail in Thunderbird? (She uses no personal computer technology).

  Thunderbird is not an e-mail provider. Only suppliers issue e-mail accounts. Comcast will allow you to make 5 or 6 different e-mail accounts. Once you have a work email address, then you can add it to your existing Thunderbird and do check the two accounts.

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• Lightroom keeps trying to create a second folder "2016" under "2016", then of subfolders, why and how do I remove the second folder "2016".

  Lightroom keeps trying to create a second folder "2016" under "2016", then the subfolders with the correct name (date) at import, why and how can I remove the second folder "2016".

  One of the possibilities: when you import, you select a Destination folder that contains a subfolder of 2016 in the path (displayed in the green rectangle) when you really want a destination folder that does not have the 2016 subfolder in the path (shown in the red rectangle)

  

• How to save a form that was created in a dynamic form with expandable files?

  I created a dynamic PDF form with expandable fields, etc. As is to be accessible to clients to complete, how can they save a copy duly completed on their own PC?

  I tried it myself and I get an error msg stating that I can only record a copy of this form: data entered in this form will not be saved. Adobe Reader can only save a copy of the form.

  How can I create a dynamic form (with a provision repeating fields/fluid etc.) which allows the applicant to not only complete the form but also to save a completed copy?

  Hello

  you need to add save rights to your form with Acrobat.

  Free you can form in Acrobat and then record it using file > save as other > Reader Extended PDF > activate tools more.

• Firefox asked a "refresh", computer locked up before finished, created a "old data FireFox file on the desktop.

  Firefox asked a 'refresh', I pressed the button refresh and process running, computer then locked up to complete before. He has created a "old data file FireFox" on the desktop. I need to understand how trasfer the data in the old file of data in my FureFox 'new' to allow me to access my bookmarks and other. Thank you!

  Hi Ken, Firefox will not start now, complaining that it cannot find its profile, or it starts up, but data are incomplete?

  Here is a procedure to return to your prior to refresh the data. It takes 5 minutes, but it's probably faster than the recovery of individual data files and those in a new profile from loading.

  Check inside the folder 'Old data Firefox' update adds on your desktop in a folder with a name random semi. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Out of Firefox and start in the Profile Manager by pasting the following text in the search box of the start menu, or the start > Run dialog box and pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?

• How can I create a second e-mail account in the same profile?

  Hello
  I want to create a second email account for my work. I want to be in the same profile and do not have the ability to edit profiles, in order to access my business account.
  I want to choose the account that I want to use in the Panel side said.
  How can I do this?
  Thank you in advance.
  Laetitia.

  Good. You can then mark it as 'Resolved' Please?
  Thank you.

• Off ads create hyperlinks in the stories I read

  Hello, I've noticed lately that seems to be corporate external ad create hyperlink in the stories I read. This is not the case when I use Internet Explorer.

  I checked with the Publisher of a site I visit (psmag.com) and he said that they don't on their end, and they do not see the problem I'm talking about. But, their front page, in four stories there was a word that was a larger font than the rest of the words, and it is a hyperlink to the outside ads. This happened again and again for the past 2 or 3 weeks on different sites. What is going on?

  These links they pointed out twice? If so, it could be textsrv it. You can block textsrv.com with Adblock Plus by adding this announcement Custom filters blocking rules. textsrv.com / *

  If not, maybe you have some malware installed. Try the software listed here:

  • Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  • SuperAntispyware - http://www.superantispyware.com/
  • Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  • AdAware - http://www.lavasoftusa.com/software/adaware/

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:

  • http://www.spywarewarrior.com/index.php
  • http://Forum.aumha.org/
  • http://www.spywareinfoforum.com/
  • http://bleepingcomputer.com/

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.