How to save a form that was created in a dynamic form with expandable files?

Similar Questions

• How Page Break, Livecycle form with combined file merged

  Hello to you all and happy Friday for those who have the weekend off.

  I would like to know what the own/easy way to make a page break. I recently created a file in Adobe Livecycle and merge this file with another PDF file that I use as a cover sheet to a notice that I will distribute soon.

  The reason why I want to add a page break is to separate the "intendant cover sheet" with the rest of the leaves that are a notice. I want to be able to set the properties for printing 2-sided printing but separate from the rest of the first sheet.

  Any tips?

  Also, I wanted to add. Adobe Acrobat 9 Pro does not allow to combine XML files, instead of save my form of livecycle designer that I had to print in PDF Primo that I could save a version no XML of my form and use the functionality combine in Acrobat 9 Pro.

  .... My original document was saved as .tds like that I could edit if necessary. Just thought I would wear the foregoing to the attention of the readers so they know what I've done.

  Since I print to PDF first of all, I am now able to use my file in Acrobat and combine it with another PDF file that I have that I want to use it as a cover sheet. This is where I want to separate the 1st page when printing to the rest of the pages do not print on the back of the cover sheet when you select print 2 sides

  Well with some good research I found my answer, and the best solution has been implemented of forms for printing. For those who have stumbled on this "Using page sets to control printing double-sided and single-side form a" works very well for XML files that are not merged with no XML.

  For those who have files not XML as you combined files XML not in a "insert after the first page in a form intended for printing two-sided with a blank page' is the solution you are looking for. Free headache as defined page controls and the location of the page master are not available for non-XML.

  I am able to add controls and the master page on my original XML file, but as I had to convert it to XML not to combine with another XML file not that these features are at the door.

  Hope all have a great weekend.

• You need to change a form that was created by someone else.

  Hello, I have to change a form that was created by someone else. I brought many changes to the text and to reposition a large number of elements, and it seemed very well on my computer. However, when I open it on my PC and other systems, the fonts are replacing and I get strange characters, where I changed the text. I tried to embed fonts with the Preflight incorporate fonts, but it's still messed up. My client is anxious... not sure what else to check. Any help would be appreciated!

  You have the source document that the PDF file created from?

  Acrobat is not a very good creation or editing program. It is best o change of the source document and regenerate the PDF file. For forms, you can replace pages and keep the form fields. Make sure you have a copy backup of the form of

• I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  Try to use Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml this programs often works when the normal functions of remove Vista not work correctly.

  If this does not work, you need to change the permissions and ownership on the file in order to have all the rights and the property (even on the inherited rights).  Then try Unlocker.  Here's the information to help you do.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Open a pdf file in my IPad that was created by Adobe Livecycle 9

  Hello

  I have great difficulty in opening an assessment that was created in Adobe LiveCycle 9 on my I Pad 2.

  I downloaded the pdf via ITunes my I touch in the iBook.

  I have Adobe Acrobat reader on the IPad and can't open this pdf file.

  I also put this file in my IPhone without success. It has even more applications: Adobe complete and sign DC, Adobe Acrobat Reader and PDF Reader Pro

  Help, please

  André

  Hello

  Mobile products Adobe Reader (player for iOS, Android, Windows Phone) do not support any static or dynamic XFA forms created with Adobe LiveCycle Designer.

  The next page of the blog contains the response of Jeff Stanier, Product Manager of Adobe LiveCycle Designer.

  The Adobe Reader Mobile and XFA in LiveCycle Designer Forms. Adobe LiveCycle Blog

  Please use the desktop version of Adobe Reader on a Windows or Mac computer to view and complete the XFA forms.

  Sorry for the inconvenience.

• Impdp discharge specific schema that was created using full = y

  Hello
  
  I received a dump (expdp) that was created by using the parameter FULL = Y. I want to just import only a single schema (impdp) in my database. I used remap_schema and exclude = grants. The pattern I want to import is successfully completed, but in my import log, I get messages such as:
  
  ORA-31684: TABLESPACE object Type: 'TS_BCST1' already exists
  
  ORA-31684: USER object Type: 'OUTLN' already exists
  
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_GENERIC ' already exists
  
  How can I use only impdp to import under my specific schema objects and do not have impdp attempt to create system/sys users and its objects, create storage spaces, etc. etc.
  
  Kindly help.
  
  Kind regards
  Karan

  Salvation;

  Pelase review
  Re: Schema export file import complete

  Respect of
  HELIOS

• How to save a pdf page 2 (created in Illustrator) to be used in a web site?

  How to save a pdf page 2 (created in Illustrator) to be used in a web site?

  When I save my Illustrator file in pdf format, it is about 2600 k, my website admin will allow only storage of 5000 kb. I tried to 'save for web', but that only saves the first page of my document. Any suggestions other than payment for more storage?

  What predefined pdf do you use? Try to file more small size rather than default illustrator.

  

  Save for web doesn't PDF, so not a multipage control.

• Upon resuming from hibernation my computer asks continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use?

  Original title: F8 and troubleshooting.

  After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.

  Recently, I had this problem.  This link above (http://support.microsoft.com/kb/294427) helped me.

  Basically, it seems to be a corrupted restore point created to go into hibernation.  I think that the system wants to remove that restore point and reboot "fresh."

  Restore data refers to a previous restoration or a restore point that was created for later use?

  
  

  A previous restore point.

  If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  
  

  If I understand you correctly, no.

  Hope this helps

  -Rich

• I do not understand how to import a project that I created in Final Cut Pro in After Effects

  I do not understand how to import a project that I created in Final Cut Pro that has many sound effects in After Effects. When sharing, choose Apple Pro Res 422, resolution 1920 x 1080, select other - After Effects, it comes as a layer in AE. I don't see how I can change this and do not know, I'm doing this right. Can someone help me please. Thank you very much.

  You can use the file--> menu to import and use the Pro import, but of course there are limits. They are just completely different programs of two separate companies.

  Mylenium

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• How can I use an external HTML form with a file upload in my page of MUSE?

  How can I use an external HTML form with a file upload in my page of MUSE? I know I can insert an external form, but how do I create a link to my email

  Yes, in most cases. If it is not in your actual embed code, you will need to be added to the script that uses the code. There are literally hundreds of form manages the codes out there on the web, it would be impossible to tell you exactly where it needs to be added. Your best option is to use a third party such as JotForms or WooForms shape provider and use the third Muse Widgets for these services.

• DOES ANYONE KNOW HOW TO SAVE IN EARLIER AS INDESIGN 2014 HAS BUILT IN CC 2015 INDESIGN FILE?

  DOES ANYONE KNOW HOW TO SAVE IN EARLIER AS INDESIGN 2014 HAS BUILT IN CC 2015 INDESIGN FILE? help please

  Save as IDML. Which can be opened by the CS4 and Momoli versions later, but there is a loss of content due to features not supported and line ends can change in the text...

  Better would be to simply work in CC 2014 if that's what you need. It is included in your subscription: How to find and install the previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• How to call a form with splashing around by clicking on a record with a time where

  Hi all
  
  How to call a form with splashing around by clicking on a record with a time where clause. I mean when I dip, click current record I want to call another form with the details of the
  record with onetime where clause. Can someone help me in this regard.
  
  Now, I'll call you a form with parameter with where Jadi but this should be avoided.
  
  
  Thanks in advance
  
  Arif

  Maybe this helps http://andreas.weiden.orcl.over-blog.de/article-28180655.html

• How to include a .lvlib in a generation that was created using a custom .dll file

  I am trying to build an executable in LV2010 which uses a .lvlib which was created using a Keyence .dll file. I added the .lvlib to the source as "Still included" files and I also added all the files "Always included." library .vi I always get the error message saying "Lack the external function" during the execution of the program. The executable seems to open properly on the development computer, but not on a secondary computer. Any ideas?

  Hi Harris,

  I would like to clarify a few points.

  -With all these configurations that you described above, the executable file worked properly on the development computer?

  -L'application works correctly on the development computer outside a build specification, just running in LabVIEW?

  -Have you tried to deploy the executable on multiple computers, and you see the same error on every computer other than the development computer?

  -Is there a software that must be installed so that the TMIF.dll to work? This software is installed on the deployment computer?

  It seems that the DLL is included with success, but for some reason, the function appears as missing. Also, I noticed that the error message has a: C at the end of the message, which makes me wonder - is this a C DLL or a Windows DLL (.NET)?

• How can I save a web page without creating a dozen or more than tiny files, which is worse than Internet Explorer?

  When I try to save a web page in Firefox, I get about a dozen tiny files with any funny names cluttering up my documents folder and makes it difficult to find anything. It reminds me of the problems I used to have with Internet Explorer more than ten years ago. But at least IE was kind enough to collect all these files in a single folder named "files". Firefox them pouring everything in the folder my documents. Messy.

  Years, I discovered Opera, which offered a file format which combined the original html code with other files in a single file: the archives of the internet, with the extension instead of htm mht. I used Opera for years, but has recently become aware of the benefits of Firefox.

  A few days ago, I downloaded the latest version of Firefox and installed. I've been evaluating it since then. It looks good; I figured out (more or less) how Bookmarks work, and I'm getting used to the task bars.

  But when I try to save a page, I still have a deluge of tiny files cluttering up the target folder. Firefox stores pages in the form of archive, but only in the old scattered form. Of course, I could just save the html code only. Maybe it's the best thing, but it loses a lot.

  The chaos of the junky files cluttering my target folder is enough to send back me to Opera, despite its limitations.

  This extension allows for web pages saved in MHT format.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/8051