Create a second standard handler.

Similar Questions

• How to create a second Adobe PDF printer with different parameters?

  Hi all

  I know that it is possible to create copies more or less unlimited normal printers under Windows (XP SP2) which each have their own settings. Very useful for standard jobs that require special configurations.

  We want to use the same technique for the creation of PDF. Now, I'm wondering how to create a second Adobe PDF printer?

  I try to create a new printer on the printer port "my Documents\ * .pdf" which is used by the existing printer, but I wonder what driver to use. Unfortunately there is no Adobe entry in the list and I can not find manually, either.

  We are still on Acrobat 8 (Professional)

  Any tips?

  Thank you very much

  Mike

  The easiest way is to add a generic printer driver. Then enter the properties, change the name and set up the port and in the printer driver. Then edit the remaining properties. You may need to leave after selecting Properties and then open back for these properties took effect. If you are looking for using the PDF Maker printer you should change the name to Adobe PDF, and you can have one of these. For use as a printer, then the other name will work fine.

  It's been a while since I've done this type of addition, but it worked when I did it.

• I need to create a second library for locations other than itunes music files?

  Mac book air with library itnes. Should high resolution I create a second library of music to not get data via itunes without loss to music downloads?

  I don't understand this. Downloads of the place where? Apple provides no music in Apple Lossless format. You can store all the files in a compatible format in the library, it's just that you can end up with multiple copies, each one representing the different format, unless you remove other versions or you do something fancy with smart playlists.

• Can I create a second e-mail address in an installation of office of Thunderbird?

  I use Thunderbird in a PC desktop system three-year-old DIY 64 bit Windows 7. I am the only user of this system and I created only one cable Comcast E-mail address for myself. I don't need a second address to date.

  I'm trying to use secure online accounts to manage healthcare for my elderly mother. I found that some sites use e-mail as the unique identification of registered users addresses.

  I wanted to avoid any confusion when I create two accounts with these sites, one for my mom and one for me. I thought that I could create a second e-mail address in Thunderbird for my mother, to use when we have all two accounts on the same site. Is it possible in Thunderbird or should I study if my ISP (Comcast) would allow me to create a second address that I can use as a 'User ID' my mother in sites that use for this e-mail addresses?

  Would I be able to receive his mail in Thunderbird? (She uses no personal computer technology).

  Thunderbird is not an e-mail provider. Only suppliers issue e-mail accounts. Comcast will allow you to make 5 or 6 different e-mail accounts. Once you have a work email address, then you can add it to your existing Thunderbird and do check the two accounts.

• How can I create a second e-mail account in the same profile?

  Hello
  I want to create a second email account for my work. I want to be in the same profile and do not have the ability to edit profiles, in order to access my business account.
  I want to choose the account that I want to use in the Panel side said.
  How can I do this?
  Thank you in advance.
  Laetitia.

  Good. You can then mark it as 'Resolved' Please?
  Thank you.

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• I created a photo album on my iMac with 241 photos but my iPhone shows that 220 photos. I deleted the album and created a second time but got the same result.

  Hi - I created a photo album on my iMac with 241 photos in it, but my iPhone shows that 220 photos from the same album. I've deleted the album and created a second time, but got the same result, only 220 photos appear. I 2.9 GB available in iCloud, so it can't be the issue.

  Al

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• I can't create a second Windows DVD creation DVD

  I created a first DVD by downloading pictures from my computer in a 7-8 minute DVD. When I tried to create a second, longer, DVD in the same way he kept coming with a pop-up box say that there has been an error in creating my DVDs, but he could never give me an error code. I tried to go through all the troubleshooting tips, but none of them helped. Can someone help me?

  Follow the steps listed by volunteer J

• create a second hardware profile for my laptop

  Hey Gang,

  I was more than happy with XP Pro - where the reason for which I only ventured into Vista...

  What I MUST DO, is to create a second hardware profile for my laptop, I need to stop the process 1 million in the second profile... any suggestions would be great.

  Soon, Brad

  Hello

  The feature to create the hardware profile has been removed in Windows Vista and was not added to Windows 7 as well however you can check the link below which could be a workaround to troubleshoot newly installed services.

  Use hardware profiles to troubleshoot Services
  http://TechNet.Microsoft.com/en-us/library/cc754635.aspx

• FS8600 - we can create a second basin NAS?

  FS8600 - we can create a second basin NAS?

  Device, you can have a single

  You can have several devices on the backend storage, even with different pools NAS.

• "Unable to create a second process" Simulator BB9800

  Everytime I try and launch my app in the simulator of torch, I get an error message of the Simulator itself (not on the simulated BB) stating "unable to create a second process. Please see the release notes for more information".

  This only happens if I run the application browser first.  If I restart the phone and launch my widget, it works fine - but then I can't launch the browser without the same mistake happening?

  I built my application using a copy of the packer of widget patched with the files of http://supportforums.blackberry.com/t5/Web-Development/Supporting-BlackBerry-Widget-applications-on-... but it doesn't seem to help.

  Is there anything else I should do?

  Hello

  You do everything correctly.  The version of the torch Simulator that is currently available for download will not accept that a single instance of webkit work.  This is a limitation of the Simulator is implemented.

• can I reset an administrator password with a reset disk created on a standard account on the same computer?

  I forgot my password to administrstor. I have a reset disk, but it was created under the standard account on the same computer and for some reason that I have problems to use it to reset the administrator password. I am able to do?

  No, the password reset disks only helps with the account, they were made on [otherwise any user could reset the admin password & enter this account].

  There are some things you can try in the PDF Password Reset Disk step by step Guide to http://www.itknowledge24.com/ but you may not be able to solve the problem without reinstall Windows & lose the current contents of the disc.

• Lightroom keeps trying to create a second folder "2016" under "2016", then of subfolders, why and how do I remove the second folder "2016".

  Lightroom keeps trying to create a second folder "2016" under "2016", then the subfolders with the correct name (date) at import, why and how can I remove the second folder "2016".

  One of the possibilities: when you import, you select a Destination folder that contains a subfolder of 2016 in the path (displayed in the green rectangle) when you really want a destination folder that does not have the 2016 subfolder in the path (shown in the red rectangle)