"Unable to create a second process" Simulator BB9800

Similar Questions

• Screen flickers on Satellite L300 and I am unable to create a recovery disk

  Hi all

  I just bought a model L300 PSLB0C 08R08C number.
  I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

  I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

  Second issue with this device, the screen flashes once whenever it is in a shutdown state.
  Number 3, the wireless card disappears from the Device Manager, until I restart.
  Laptop made in China ;-)

  Any suggestions are much apprecaited

  Hello

  It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

  regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

  Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

  concerning

• create a second hardware profile for my laptop

  Hey Gang,

  I was more than happy with XP Pro - where the reason for which I only ventured into Vista...

  What I MUST DO, is to create a second hardware profile for my laptop, I need to stop the process 1 million in the second profile... any suggestions would be great.

  Soon, Brad

  Hello

  The feature to create the hardware profile has been removed in Windows Vista and was not added to Windows 7 as well however you can check the link below which could be a workaround to troubleshoot newly installed services.

  Use hardware profiles to troubleshoot Services
  http://TechNet.Microsoft.com/en-us/library/cc754635.aspx

• "Unable to create image buffer" error when rendering

  I'm trying to render it again a project previously made in the new version of first.   My machine is 16 GB of RAM, processor Intel i5, Nvidia 960 graphics card.   I've made this before.   But in this first version, RAM usage increases until all the 16 GB is full, make it fails with the message "Unable to create image buffer."   I also get the message that my computer is low on memory and a second 'unknown error' first.    This message in the event Log:

  Windows correctly diagnosed a State of lack of virtual memory.

  The following programs use the most virtual memory: Adobe Premiere Pro.exe (12704) consumed 61467721728 bytes, natspeak.exe (10428) consumed bytes 549675008 and n360.exe (2404) consumed bytes 235859968.

  I deleted / restore my preference in first twice, without modification.   I also see this behavior in Adobe Media Encoder.   Anyone else seen this?

  I was the sequence of the deletion and recreation, and the problem seems to have disappeared.  I tried to re-create the bug, so I can post more information, but no luck so far.   All I know for sure is that it was REALLY boring.

• Create a second instance for Oracle 11 g on Windows Server 2008

  Hi gurus.
  
  I'm happy to be called a noob to this but could someone please help me. I would like to install\create a second instance of Oracle database on a Windows Server and I was wondering how to do this. Just use DBCA? And are there pitfalls that I should be looking out?
  
  I did once on an OEL5 install and I had to change environmental variables, but I think that the process is much easier on a machine under Windows environment.
  
  Help, please.
  
  Thank you

  800166 wrote:
  Thanks for the reply.

  If I create all the installation first and then create the second instance using dbca and what do you mean when you say properly configured net sql

  TNSNAMES. ORA must contain at least one entry for each instance

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• I need to create a second library for locations other than itunes music files?

  Mac book air with library itnes. Should high resolution I create a second library of music to not get data via itunes without loss to music downloads?

  I don't understand this. Downloads of the place where? Apple provides no music in Apple Lossless format. You can store all the files in a compatible format in the library, it's just that you can end up with multiple copies, each one representing the different format, unless you remove other versions or you do something fancy with smart playlists.

• Can I create a second e-mail address in an installation of office of Thunderbird?

  I use Thunderbird in a PC desktop system three-year-old DIY 64 bit Windows 7. I am the only user of this system and I created only one cable Comcast E-mail address for myself. I don't need a second address to date.

  I'm trying to use secure online accounts to manage healthcare for my elderly mother. I found that some sites use e-mail as the unique identification of registered users addresses.

  I wanted to avoid any confusion when I create two accounts with these sites, one for my mom and one for me. I thought that I could create a second e-mail address in Thunderbird for my mother, to use when we have all two accounts on the same site. Is it possible in Thunderbird or should I study if my ISP (Comcast) would allow me to create a second address that I can use as a 'User ID' my mother in sites that use for this e-mail addresses?

  Would I be able to receive his mail in Thunderbird? (She uses no personal computer technology).

  Thunderbird is not an e-mail provider. Only suppliers issue e-mail accounts. Comcast will allow you to make 5 or 6 different e-mail accounts. Once you have a work email address, then you can add it to your existing Thunderbird and do check the two accounts.

• How can I create a second e-mail account in the same profile?

  Hello
  I want to create a second email account for my work. I want to be in the same profile and do not have the ability to edit profiles, in order to access my business account.
  I want to choose the account that I want to use in the Panel side said.
  How can I do this?
  Thank you in advance.
  Laetitia.

  Good. You can then mark it as 'Resolved' Please?
  Thank you.

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• I created a photo album on my iMac with 241 photos but my iPhone shows that 220 photos. I deleted the album and created a second time but got the same result.

  Hi - I created a photo album on my iMac with 241 photos in it, but my iPhone shows that 220 photos from the same album. I've deleted the album and created a second time, but got the same result, only 220 photos appear. I 2.9 GB available in iCloud, so it can't be the issue.

  Al

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• Unable to create the disc of recovery on my Equium P300-19O

  I am unable to create a recovery disk. I get an error code: 020150-20-00000000 and the F:106557xsp4.swm file missing message. When you create the disc 1. Two disk does not work either.

  I think it's important to do these recovery disks, but I have already lost 5 discs already. Is there any help that anyone can give.

  Thank you

  The hidden restore partition has been deleted or changed?

  Perhaps the hidden partition was damaged because of a loss of power or something.

  You should test the memory and the disk using Memtest: www.memtest.org and DFT: http://www.hitachigst.com/hdd/support/download.htm

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Unable to create DirectX device

  I used to play 'FREECELL' until I finished the game I left for a few hours and when I came back to my computer, there was an error that says error: unable to create DirectX device. I closed the error box and everything seems to work OK.

  Hello

  I had the same problem until I uninstalled a program to screen saver

  Hope this works