create active enforcement of planning with the quarters.

Similar Questions

• I want to install a second hard drive in my laptop (mSata SSD), so do I create a system dual boot with the same license Windows on each disc.

  Original title: Dual Boot Laptop

  I want to install a second hard drive in my laptop (mSata SSD), I have two programs to install that "do not receive the", so I can create a system dual boot with the same license Windows on each disc. I can run only one at a time, and it's the same pc/laptop.

  No, you can't, a second facility would be like installing on a second computer, you will need to purchase a second license.

• How to create a file name variable with the County and the date?

  Objective: Create a file name variable with the County and the date

  Error: get a lot of error. Do you know how to change my code?

  Question: how to create a file name variable with the County and the date?

  Mini code:

  std::string * rawfilepath;
  std::string * rawfilename;

  rawfilepath = "./shared/documents/";
  RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
  QFile file (rawfilename);
  If (file.exists ()) {}
  rawfilenamecount ++;
  RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
  }

  Thank you for your attention,

  Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.

  Solution is below.

  While (access (rawfilename, F_OK)! = - 1) {}
  rawfilenamecount ++;
  sprintf (format, RawFileName, rawfilenamecount);
  fprintf (stderr, "file exists");
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "System Time (ms)" "");

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• How to create a my Signature (signature with the tablet of manufacturing) Action?

  How to create a my Signature (signature with the tablet of manufacturing) Action?

  I use PSCS6?

  I have no problem making an action of signature if I pick a font and then type in my name,

  but to make a real action of my signature seems impossible.

  Hello

  There is a very cool technique to do by your signature in a Photoshop brush.  Once this is a brush, you can change the size and place the signature everywhere where you want.

  Google "Photoshop brush signature" or something similar and you will see a lot of tutorials.  Try this one:

  Photoshop reference guide | Creating a custom brush Signature | Peachpit

  Basically, you sign your signature on a blank piece of paper, then you scan in a JPG or TIFF file, then you open that file in PS to create a brush.

  I hope this helps.

  John

• create a new virtual machine with the default settings?

  I was wondering if there was a way to create a new virtual machine with the default settings.

  For example, let's say I want all new Lion VM to have 2 CPU cores. Is there a way to set this automatically? There are other parameters I want a new machine to inherit automatically, I was wondering if there is an automatic way to do this, or is it a feature request...

  Thanks in advance

  lerker wrote:

  Just for my clarification, when you say a vm model, basically I would execute a finder copy then drag back to the VM library, right?

  Yes.

  On the orders of spcirpting, it would be unix commands or are there specific vmware controls that make your job easier (in Applications/VMware\ Fusion/content or elsewhere)...

  IIRC, VMware Fusion 3 and later versions has an AppleScript dictionary, but it is not yet officially supported and may not be able to do what you want so, basically, only Unix Shell scripts, that's what I was referring to.  For an example, see my script attached to the following response: Re: vmware - script of the creation of the vm and the operating system installation process

• After affects that can create a visualizer that goes with the music for Winamp, Virtualdj, Dj Sofware ETC.

  Can you help me after affects may create a visualizer that goes with the music for Winamp, Virtualdj, Dj Sofware ETC.

  
  

  or y at - it a plugin to convert?
  

  N °

  Mylenium

• How many photos can I create and edit per month with the $9.99 plan?

  I was wondering if there was no limitation on the number of projects I can do in a month with the $9.99 plan

  Hi crisr27764025,

  There is no limit to the number of photos.

  You can change as many photos/projects using Lightroom and Photoshop you want (with the $9.99 plan)

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

  The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

  InfiniteNothing-

  If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

  Take care!

• Hello, the issue with Microsoft Server-link plan with the execution of query execution

  is it possible to map estimated plan (parts) to running query? for example I have a simple query worked 5 minutes already. And I have his plan estimated with 3 main rooms as the clustered index seek for one of join tables, analysis of table to the second table junction and the nested loops join operation that works with two inputs and outputs corresponding rows.can I somehow know what exact SQL Server query execute development plan part is currently - running at this minute - for example is reading pages of data #n - #m with the index clustered or / and match lines key #x - #y.

  Hello

  I suggest you according to the question in this forum and check if that helps:
  http://social.msdn.Microsoft.com/forums/en-us/TransactSQL

  It will be useful.

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• (Redirected) The Dell's Active pen is compatible with the Inspiron 7352?

  Is the active pen Dell Dell manufacturer: 750-compatible with the Inspiron 7352 AAMI?

  The description States it is compatible with "select" portable 2 L1, but does not bother to list books. How hard is it to compatible hardware list? You have to jump through hoops to find out what works and what does not. This is ridiculous from a customer service perspective.

  I took a * and ordered the feather, the buttons work to make appear the Onenote application, but I cannot write on my screen with it. I don't know if there is something I am doing wrong or if it's just is not compatible. There is no decent online manual.

  Mixed with all wireless issues I've had with my Inspiron 7352 makes me regret try Dell. I wish I would have never ordered or sent during the return period. At this point, I'm willing to sell this computer for all that I get for it, count the money I lost as a lesson learned and never again buy another Dell.

  Hi Randi2002,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/

• If I have a plan of photography, can I select a single App plan with the same account?

  Then I can have the same both times?

  I have need for all applications, only Photoshop and Illustrator.

  Hi Barpaff,

  Yes, you can add illustrator with the same account. So, you are going to have two applications.  ((1) creative cloud photography Plan and unique Cloud 2) Creative app Illustrator.

  You can add as many as the only application on the same account, but the application must be different.

  Let us know if you need more information.

  Thank you
  Florianne Jindal

• How to create a store of data with the small block size

  Hello

  I want to create a data store on two 160 GB drives. All the VI Client allows me to do is to create a data store of whole disc with 1 MB block. But for reasons of performance with the virtualized Oracle RAC, which is 8K organized, I want to go down to a smaller block size. But how?

  Is it possible to split my drive to (lets say) four parts, each with a smaller block size and putting them all together like extends in a data store? To create partitions with fdisk does not work, as the VI Client wants to use the unpartitioned disk. Any ideas?

  Robert

  Hello

  It is not possible. The smallest block size is 1 MB on a VMFS partition.

  Best regards

  Lars Liljeroth

  -